Wind energy planning: Development and application of a site selection method for wind energy conversion systems (WECS)

The use of wind energy by means of its conversion to electricity involves a number of constrains such as economic, environmental, technical, legal, social and institutional requirements. Planning for wind energy should solve these issues in the planning process by encouraging opportunities and discouraging constraints associated with the use of wind energy. The opportunities and constraints significant at the regional level (i.e. approximately 10,000 km²) were identified, and a systematic method was developed to select sites for large WECS by incorporating the identified factors. These factors include: wind resource, proximity to load centres, proximity to tie-in points, and exclusive land-use areas. The developed method was applied to the western Massachusetts region, and the first results of the study have been acquired.     

HVEM study of crack-tip dislocations in Si crystals prepared by FIB and twin-blade cutting method

Crack-tip dislocations in silicon crystals have been examined by using high-voltage electron microscopy. Cracks were introduced by the Vickers indentation method at room temperature and the indented specimens were annealed at high temperatures to induce dislocations around crack tips under the presence of residual stress due to the indentation. A selected area around a crack tip was thinned by a focused ion beam (FIB) technique. Specimens were thinned in advance by a twin-blade cutting (TBC) method, which is a simple cutting process for saving FIB machine time. A combination of FIB and TBC can be a useful thinning procedure for the efficient preparation of transmission electron microscopy specimens. Characteristic dislocation structures were observed around the tip of a crack, aiding the elucidation of dislocation processes, which is essential to increase the fracture toughness of materials.     

Crystallization of β-FeSi2 droplets on silicon substrates by room-temperature pulsed laser deposition

This paper reports the fabrication process of β-FeSi₂ droplets on silicon substrates at room temperature by ArF excimer pulsed laser deposition (PLD). The chemical treatment of substrate could compensate the thermal treatment of the deposited droplets. Observations with the transmission electron microscopy revealed that the crystallization of droplet began from the surface of droplet rather than from the interface between the melt and the substrate.     

A novel spacer‐free panel structure and glass for FEDs

Abstract— A new design for an FED envelope, composed of box‐shaped front glass, sheet‐like rear glass, and metal members, has been devised. This design structure is effective in reducing tensile stress induced by vacuum at the sealing points. Also, a new glass composition, a new physical tempering method, and a lead‐free hermetic sealing material have been developed. As a result, a novel lightweight spacer‐free panel structure for FEDs has been developed by integrating these new technologies. It will assist in maximizing the essential advantages of FED such as high image quality, high reliability, and low cost.     

Biomimetic ion-channel sensors based on host-guest molecular recognition in Langmuir-Blodgett membrane assemblies

Biomimetic “ion-channel sensors” based on host-guest molecular recognition were constructed by incorporating several kinds of receptor molecules in Langmuir-Blodgett (LB) molecular assemblies deposited directly on glassy carbon electrodes. The receptors used were valinomycin, bis(crown ether)s, macrocyclic polyamine and cyclodextrin polyamine. The binding of charged stimulants (metal ions, inorganic and organic anions) to these receptors induced a marked increase (or decrease) in the ion permeability of the membranes, as detected by cyclic voltammetry using [Fe(CN)₆]^4- or [Ru(bpy)₃]²⁺ as marker ion. Such a mode of response, corresponding to model “channel opening (or closing)”, can be explained on the basis of the charge-charge interaction involving the stimulant, marker ion and lipid.     

A High-Frequency Resonant Inverter Using Current-Vector Control Scheme and Its Performance Evaluations

The authors introduce a new configuration of resonant-type high-frequency inverter having inherent fast control response of the output power and variable-voltage variable-frequency (VVVF) capability. The circuit is composed of a parallel combination of two series-resonant inverters with common input and output terminals. Both inverter units are operated at synchronous frequency and with an adjustable phase difference from 0° to 180°, allowing control of the output power from full to null power, respectively. Operation of this inverter is explained and computer-simulated operating waveforms and characteristic curves are shown in terms of normalized control variables and circuit parameters. A prototype inverter using Power MOSFET modules has been originally tested with a high-frequency induction heating and melting load to demonstrate experimentally the proposed control principle and the steady-state inverter performances under parallel tuned load conditions.     

Heat extraction characteristics by coaxial heat exchanger

This study was performed to investigate the heat extraction characteristics from shallow geothermal resources using a coaxial heat exchanger. First, a computer simulation program for a coaxial heat exchanger was checked and verified by laboratory experiments. After inspecting the effectiveness of the computer program described herein, a numerical simulation for a real scale model was conducted under the condition that the heat transfer mechanism in the stratum was heat conduction. Unsteady heat extraction characteristics are presented herein, and the effects of the tube material, inner diameter, and circular modes on the heat extraction rate are discussed. From the computer results it was found that the heat extraction performance using a coaxial heat exchanger greatly depended on the factors mentioned above in the range of the parameters covered in this study. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 496–513, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20083