A Design Of Multiloop Predictive Self‐Tuning Pid Controllers

In this paper, a new design scheme of multiloop predictive self‐tuning PID controllers is proposed for multivariable systems. The proposed scheme firstly uses a static pre‐compensator as an approximately decoupling device, in order to roughly reduced the interaction terms of the controlled object. The static matrix pre‐compensator is adjusted by an on‐line estimator. Furthermore, by regarding the approximately decoupled system as a series of single‐input single‐output subsystems, a single‐input single‐output PID controller is designed for each subsystem. The PID parameters are calculated on‐line based on the relationship between the PID control and the generalized predictive control laws. The proposed scheme is numerically evaluated on a simulation example.     

Electrical conductivity of a sintered pellet of octalithium zirconate

The conductivity of a sintered pellet of Li₈ZrO₆ was measured in dry or wet argon atmosphere by the two-terminal technique with an AC Wheatstone bridge in the temperature range 350–1050 K. The temperature dependence of conductivity multiplied by temperature $\text{(σT)}$ of Li₈ZrO₆ in a dry environment had two transition points at 426 and 833 K. The activation energies of conductivity in high, middle and low temperature regions were 103.2, 52.1 and 37.4 kJ/mol, respectively. The activation energies of conductivity agreed well with those obtained by temperature dependence of spin-lattice relaxation time $\text{T}{}_1$ of ⁷Li with pulsed nuclear magnetic resonance.     

Aptamer conjugated magnetic nanoparticles as nanosurgeons

Magnetic nanoparticles have shown promise in the fields of targeted drug delivery, hyperthermia and magnetic resonance imaging (MRI) in cancer therapy. The ability of magnetic nanoparticles to undergo surface modification and the effect of external magnetic field in the dynamics of their movement make them an excellent nanoplatform for cancer destruction. Surgical removal of cancerous or unwanted cells selectively from the interior of an organ or tissue without any collateral damage is a serious problem due to the highly infiltrative nature of cancer. To address this problem in surgery, we have developed a nanosurgeon for the selective removal of target cells using aptamer conjugated magnetic nanoparticles controlled by an externally applied three-dimensional rotational magnetic field. With the help of the nanosurgeon, we were able to perform surgical actions on target cells in in vitro studies. LDH and intracellular calcium release assay confirmed the death of cancer cells due to the action of the nanosurgeon which in turn nullifies the possibility of proliferation by the removed cells. The nanosurgeon will be a useful tool in the medical field for selective surgery and cell manipulation studies. Additionally, this system could be upgraded for the selective removal of complex cancers from diverse tissues by incorporating various target specific ligands on magnetic nanoparticles.     

Water‐holding capacity of insoluble fibre decreases free water and elevates digesta viscosity in the rat

BACKGROUND: The relationships between possible physiological properties of insoluble fibre and the viscosity of digesta are poorly understood. The aim of this study was to investigate the effect of insoluble fibres with different water‐holding capacity, swelling, oil‐holding capacity and cation exchange capacity on gastric, small intestinal and caecal contents in rats fed a semi‐purified diet containing either no fibre (control), 50 g kg^?1 tossa jute fibre or 50 g kg^?1 shiitake fibre. RESULTS: The water‐holding capacity, swelling, oil‐holding capacity and cation exchange capacity of insoluble fibres of tossa jute were higher than those of shiitake (P < 0.001). The order of the viscosities of digesta was control group < shiitake fibre group < tossa jute fibre group in gastric, small intestinal and caecal contents (P < 0.05). The digesta viscosity at a shear rate of 40 s^?1 was strongly correlated with the free water content of digesta (r = ? 0.89; P < 0.01). The free water content of digesta depended on the water‐holding capacity of insoluble fibres represented as a linear function with negative slope (P < 0.001). CONCLUSION: The viscosity of digesta depends on the free water content, and this is reduced by fibre that holds water and can swell. Copyright © 2008 Society of Chemical Industry     

Development of an efficient gene-targeting system in Aspergillus luchuensis by deletion of the non-homologous end joining system

The industrial fungus Aspergillus luchuensis is used to produce a distilled spirit in Okinawa Island, Japan. Recently, the genome sequence of A. luchuensis RIB2604 (Aspergillus awamori NBRC 4314) was revealed and many functional genes are now expected to be analyzed. Gene targeting is necessary for analyzing the function of a gene; however, gene targeting frequencies in A. luchuensis are very low. To develop a highly efficient gene-targeting system for A. luchuensis, we disrupted A. luchuensis ligD (ALligD) encoding the human DNA ligase IV (ligIV) homologue using an Agrobacterium mediated gene transformation method. Deletion of ALligD dramatically improved homologous recombination efficiency (reached 100%) compared to that in the wild-type strain (0.8%), when 1000-bp homologous flanking regions were used. The ALligD disruptant showed no apparent defect in vegetative growth, and it exhibited increased sensitivity to phleomycin and high methyl methanesulphonate concentrations compared to the wild-type strain. Furthermore, using this ALligD disruptant, we disrupted ALpksP encoding an Aspergillus fumigatus polyketide synthase P (alb1/pksP) orthologue. The ALpksP disruptant displayed a decolourized conidial phenotype. This result indicated that ALpksP is a key factor for conidial black pigmentation in A. luchuensis. Our results indicate that the ALligD mutant is an efficient host for targeted gene disruption in A. luchuensis.     

Multi-residue method for determination of veterinary drugs and feed additives in meats by HPLC

A simple and rapid multi-residue method was developed for the determination of 28 kinds of veterinary drugs and feed additives (drugs) in muscle of cattle, pig and chicken. The drugs were extracted with acetonitrile-water (95:5) in a homogenizer and ultrasonic generator. The extracted solution was poured into an alumina column and the drugs were eluted with acetonitrile-water (90:10). The eluate was washed with n-hexane saturated with acetonitrile and then evaporated. The drugs were separated on a Inertsil ODS-3V column (4.6 mm i.d. x 250 mm) with a gradient system of 0.1% phosphoric acid-acetonitrile as the mobile phase, with monitoring at 280 and 340 nm. The recoveries of the 26 kinds of drugs were over 60% from the meats fortified at 0.1 microg/g, and the quantification limits of most drugs were 0.01 microg/g. This proposed method was found to be effective and suitable for the screening of the above drugs in meats.     

Estimation of daily oral exposure to phthalates derived from soft polyvinyl chloride baby toys

Daily oral exposure of babies to phthalate was estimated on the basis of the mouthing time of infants and the oral concentration of diisononyl phthalate (DINP) released from polyvinyl chloride (PVC) toy specimens. Total mouthing time, including the use of pacifiers, ranged widely from 11.4 min to 351.8 min with the mean of 105.3 +/- 72.1 min. The mean of the total mouthing time without pacifiers was 73.9 +/- 32.9 min. The average amount of DINP in saliva was 92.4 +/- 56.8 micrograms/10 cm2/hr, ranging from 13.2 micrograms/10 cm2/hr to 240.4 micrograms/10 cm2/hr. The exposure of phthalate in two different trials was estimated by the method of Monte Carlo simulation, one with the total mouthing time with pacifiers and the other with the total mouthing time without pacifiers. The average exposure in the former trial was 21.4 micrograms/kg/day and the 95th percentile was 65.8 micrograms/kg/day, while in the latter it was 14.8 micrograms/kg/day and the 95th percentile was 35.7 micrograms/kg/day.     

Study of deep oxidation and sulfonation of graphene oxide as low-temperature fuel cell electrolyte

In order improve the fuel cell performance of a free-standing graphene oxide (GO) membrane, the impacts of both the additional oxidation of GO and the modification with vinilsulfonic acid were investigated. The modification with vinilsulfonic acid was conducted with and without adding potassium persulfate, K₂S₂O₈, which is a radical initiator for the polymerization of vinylsulfonate. A total of six types of free-standing GO membranes with and without the oxidation and/or the modification were prepared. The oxidation and the modification additively increased the proton conductivity, and the oxidation significantly improved the durability of the fuel cell performance at 30 °C. The membrane of GOhvsi, of which GO was oxidized and modified with the initiator, showed very high in-plane proton conductivities at 30 °C, i.e., 0.54 S cm^?1 at RH 100%. The H₂–O₂ fuel cell using GOhvsi showed maximum power densities as high as 136 mW cm^?2 and 184 mW cm^?2 at 30 °C and 50 °C, respectively. The performance at 30 °C was stable for more than 20 h. The improved durability by the oxidation was attributed to the increased defects of carbon based on an XPS analysis. The TPD-MS analysis suggested that the oxygenated functional groups at the defects would increase the binding strength.     

Growth and properties of SiGe multicrystals with microscopic compositional distribution for high-efficiency solar cells

The growth technique and physical properties of SiGe multicrystals with microscopic compositional distribution are demonstrated for new high-efficiency solar cells in which the wavelength dependence of the absorption coefficient can be freely designed by controlling the compositional distribution in the SiGe multicrystals. This growth technique is suitable for the practical casting method, and it is made up of melt growth of SiGe multicrystals with wide and microscopic distribution of the composition from Si to Ge all over the crystals. It is studied how much widely the microscopic compositional distribution in SiGe multicrystals grown from binary Si–Ge melts can be controlled by the melt composition and the cooling process. The range of the microscopic compositional distribution becomes wider as the starting Si concentration in the growth melt becomes larger. SiGe multicrystals with various microscopic compositional distribution can be freely controlled by optimizing the melt composition and the cooling process. The wavelength dependence of the absorption coefficient of such SiGe multicrystals can also be freely designed. Using the experimentally determined absorption coefficient of a SiGe crystal with microscopic compositional distribution, the short circuit photo-current of solar cells was calculated and it is demonstrated that the short circuit photo-current can be much larger for SiGe with microscopic compositional distribution than for SiGe with uniform composition. Si thin film can be easily grown on such a SiGe multicrystal and the Si/SiGe heterostructure can be obtained. These results show that SiGe multicrystals with microscopic compositional distribution are hopeful for new high-efficiency solar cell applications by using the practical casting method.