A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.     

A single solution method for converting 2D assembly drawings to 3D part drawings

Although solid models play a central role in modern CAD systems, 2D CAD systems are still commonly used for designing products without complex curved faces. Therefore, an important task is to convert 2D drawings to solid models, and this is usually carried out manually even in present CAD systems. Many methods have been proposed to automatically convert orthographic part drawings of solid objects to solid models. Unfortunately, products are usually drawn as 2D assembly drawings, and therefore, these methods cannot be applied. A further problem is the difficult and time-consuming task of decomposing 2D assembly drawings into 2D part drawings. In previous work, the authors proposed a method to automatically decompose 2D assembly drawings into 3D part drawings, from which 2D part drawings can be easily generated. However, one problem with the proposed method was that the number of solutions could easily explode if the 2D assembly drawings became complex. Building on this work, here we describe a new method to automatically convert 2D assembly drawings to 3D part drawings, generating a unique solution for designers regardless of the complexity of the original 2D assembly drawings. The only requirement for the approach is that the assembly drawings consist of standard parts such as bars and plates. In 2D assembly drawings, the dimensions, part numbers and parts lists are usually drawn, and the proposed method utilizes these to obtain a unique solution.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Application of ergothioneine-rich extract from an edible mushroom Flammulina velutipes for melanosis prevention in shrimp,Penaeus monodon and Litopenaeus vannamei

This report investigated the melanosis-inhibiting properties of crude water soluble extract from the base and fruiting body waste of an edible mushroom (Flammulina velutipes) containing 9.13 ± 2.03 mg/mL 2-thiol-l-histidine-betaine (ergothioneine, ESH). Immersion of live full-grown black tiger shrimp (Penaeus monodon) and Pacific white shrimp (Litopenaeus vannamei) in a 0.5% w/v solution of mushroom extract for 1 h significantly decreased polyphenoloxidase (PPO) activity in shrimp hemolymph and expression of the prophenoloxidase (proPO) gene in hemocytes. Consequently, the development of melanosis in the treated shrimp during ice storage was prevented. Treatment with a 0.05% w/v solution of sodium sulfite and 4-hexyl-1,3-benzenediol had a similar effect. Enzyme assays showed that ESH is a non-competitive inhibitor. It is proposed that ESH possibly interacts directly with Cu²⁺ at the putative binding sites of PPO and proPO, based on copper-chelating activity analyses, thus preventing melanosis in the shrimp. This study indicated that application of ESH-rich F. velutipes mushroom extract from trimming waste is an effective natural alternative to synthetic melanosis-inhibiting agents to prevent postmortem melanosis in shrimp.     

Thermal and mechanical properties of bio-based polymer networks by thiol-ene photopolymerizations of gallic acid and pyrogallol derivatives

Allylated pyrogallol (A3PG) and acrylated pyrogallol (Ac3PG) as bio-based trienes, and allylated gallic acid (A4GA) and acrylated allyl gallate (Ac3A1GA) as bio-based tetraenes were synthesized from pyrogallol and gallic acid, respectively. Thiol-ene photopolymerizations of the bio-based polyenes and a pentaerythritol-based primary tetrathiol (pS4P) at the allyl/SH ratio of 1/1 produced photo-cured resins (A3PG-pS4P, Ac3PG-pS4P, A4GA-pS4P and Ac3A1GA-pS4P). The FT-IR spectral analysis revealed that thiol-ene reactions of thiol/allyl and thiol/acryloyl groups smoothly proceeded. Gel fractions of acryl-based cured resins were a little higher than those of allyl-based cured resins. The swelling test and dynamic mechanical analysis revealed that GA- and acryl-based cured resins exhibited higher crosslinking densities than PG- and allyl-based cured resins, respectively. A higher order of tan δ peak temperature was Ac3PG-pS4P (48.3 ° C) > Ac3A1GA-pS4P (24.1 ° C) > A4GA-pS4P (22.1 ° C) > A3PG-pS4P (?7.8 ° C). Ac3PG-pS4P displayed the highest 5 % weight loss temperature, tensile strength and tensile modulus among all of the cured resins.