Effects of the degree of unsaturation of coexisting triacylglycerols on cholesterol oxidation

In order to evaluate the effects of the degree of unsaturation of triacylglycerols on cholesterol oxidation, mixtures of purified sardine oil triacylglycerols (iodine value, IV=182.6) and cholesterol; of partially hydrogenated sardine oil triacylglycerols (IV=174.5) and cholesterol; and of fully hydrogenated sardine oil triacylglycerols (IV=92.0) and cholesterol were incubated at 25°C in the dark. The oxidative stability of the samples decreased with increasing degree of unsaturation of the triacylglycerols in the sample mixtures; the induction period for peroxide values (PV) of the sardine oil triacylglycerols and cholesterol was shorter than that of the partially hydrogenated sardine oil triacylglycerols and cholesterol. Certain polyunsaturated fatty acids (PUFAs) in the constituent fatty acids of sardine oil triacylglycerols started to decrease after a shorter induction period compared with that of the partially hydrogenated triacylglycerols. The prominent cholesterol oxides accumulated in the samples were 7β-hydroxycholesterol, 7-ketocholesterol, β-epoxide and cholestane triol. The tendency for accumulation of cholesterol oxides in the time course coincided with the changes in PV as well as the decrease in PUFAs. Cholesterol was oxidized in conjunction with autoxidation of coexisting fish oil triacylglycerols. Although lowering the degree of unsaturation of fish oil triacylglycerols was effective in prolonging the induction period of cholesterol oxidation, the rate of cholesterol oxidation in the cholesterol oxides' formation phase after the induction period was not affected by the difference in the proportion of highly unsaturated fatty acids in the natural and partially hydrogenated triacylglycerols of fish oils.     

New energy management system for central dispatching center ofTokyo Electric Power Co., Inc

The Tokyo Electric Power Co. Inc. (TEPCO) and Toshiba developed an energy management system that was put into operation in December 1988. The authors review the background of developing the new system and the concept underlying the development, with the aim of improving reliability and enhancing capability. They describe the system configuration, configuration control of the distributed subsystems, and the application software. To enhance system function, two subsystems (one composed of two computers and another composed of a single computer) were planned to be installed in February 1990. One unit will analyze and access the voltage stability of the power system on a real-time basis. The other will perform the monitoring and analysis of demand characteristics by collecting information on active as well as reactive power consumption of typical users     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

A Computational Investigation on the Control of Cavity-Induced Pressure Oscillations Using Sub-Cavity

A computational investigation has been conducted to determine the effectiveness of a passive control technique ofattenuating cavity-induced pressure oscillations in a confined two-dimensional supersonic flow.The passivecontrol technique is achieved by fitting two flat plates near the front wall of a square cavity at Mach number 1.83at the cavity entrance.The results showed that the flat plates attached near the front wall of the cavity,discouraged the formation of feedback loop which is widely believed to be the reason of cavity resonance.Theresultant amount of attenuation of pressure oscillations was also dependent on the length of the fiat plate used asan oscillation suppressor.     

正反转双转轮水轮机水力性能研究

研究用于低水头的反转双转轮、双转子小型水力发电设备,探讨反转双转轮的基本原理与水轮机转轮的水力特性,确认了在流量一定的运转工况时反转前转轮转速与正转后转轮转速相等条件下可以得到最高效率、且出力为两转轮之和(单转轮的2倍)。通过模型实验,确认了正反转两转轮的水力性能基本满足一般的相似准则,可以进行实际转轮设计时的换算。     

Effect of Non-Equilibrium Condensation of Moist Air on Flow Field in Ludwieg Tube

The time-dependent behavior of non-equilibrium condensation of moist air through a Ludwieg tube with a diaphragm downstream is investigated by using a computational fluid dynamics work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The present computations represent the experimental flows well. The results obtained show that for an initial relative humidity over 40 %, the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to non-equilibrium condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity. Furthermore, the variations of condensation properties are also di     

Pulse Combustors - Performance and Control

~nonEmphasising time characterishcs and contIDI, onlyfew workll'v is av'ailable among the numerous reports onPulse combustors. Rare work deals with tWin Pulsecombustorsls] or combined pulse combustor-"dinesystemsl']. Kenffield15] obtained with a combinedconvenhonal Pulse combustor-tulbine system acombushon Pressals gain of 3-7% and a totalPerformance Of the combustor-"dine system for Pulsecombushon 40% higher than that of steady'combushonwhat aught also be due tO the brine characteristics.…     

Numerical study of radiation‐convection heat transfer

In this study, the authors attempted to introduce a simulation technique for radiation‐convection heat transfer in the high‐temperature fields of industrial furnaces, boilers, and gas turbine combustors. The convection effect was analyzed by a differential equation, but the radiation effect was analyzed by an integral equation. Thus, it was not easy to arrange both effects using the same type of equations. Then, the authors introduced the zone method and Monte Carlo method for the integral equation of the radiation effect and the finite difference method for the differential equation of the convection effect. A three‐dimensional analysis of the high‐temperature furnace was performed by this simulation technique to obtain its temperature distribution. Furthermore, another radiation‐convection heat transfer analysis in the low‐temperature living room was performed by the same technique. Finally, the authors tried to develop a computer software for radiation‐convection heat transfer and described their idea of software construction for the above. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(5): 391–407, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10042     

Three Dimensional Separation with Spiral—Focus in a Decelerating Duct Flow （Effect of Asymmetric Inlet Boundary Layer Thickness）

An experimental apparatus was developed to study the three dimensional separated flow with spiral-foci. The internal decelerating flow was generated by the air suction from a side wall to produce the separation on an opposite-side wall. The relation between the upstream boundary layer and the generation of spiral-foci in the separation region was observed by a tuft method. As a result, it was clarified that the spiral-focus type separation could be produced on the side wall and its behavior was closely related to the vortices supplied into the separation region from the boundary layer developing along top wall or bottom one.     

Numerical Investigation of Kinetic Energy and Surface Energy of Wavy Falling Liquid Film

Numerical simulations have been carried out for two-dimensional wavy falling liquid film in order to investigatekinetic energy and surface energy of that liquid film.Governing equations,which are continuity equation,Na-vier-Stokes equation,and equations of interfacial boundary conditions including surface movement and effect ofsurface tension,have been solved directly by means of a numerical scheme based on the finite difference method.In most cases,periodic disturbances superimposed at inflow boundary grow to fully developed waves which re-tain the given periodic behavior.In some cases,however,random waves appear after the fully developed waves.Variations of kinetic energy and surface energy of the periodically developed waves and the random waves havebeen discussed.