Phase study on solid fission products,Ba, Sr and Zr in oxide fuel

Behavior of pseudo-fission products (Ba, Sr, and Zr) as oxides in UO₂ has been investigated by means of high-temperature X-ray diffraction and microprobe analysis. Two identifiable compounds were formed as reaction products in the mixed oxides which initially consisted of UO₂, BaO, SrO, and ZrO₂ powder. These compounds were present and were identified crystallographically as (Ba, Sr) ZrO₃ and (Ba, Sr)UO₃ after heat treatment of the powders at 1500°C for 30 min. Both compounds are isostructural with perovskite, CaTiO₃, and the lattice parameters of both (Ba, Sr)ZrO₃ and (Ba, Sr)UO₃ decrease with increasing content of Sr. (Ba, Sr)UO₃ is decomposed almost completely at 1800°C while (Ba, Sr) ZrO₃ is stable up to 2000°C. The behavior of Ba, Sr, and Zr in fuel under irradiation is discussed.     

Mechanical properties of high purity polycrystalline cBN synthesized by direct conversion sintering method

Mechanical properties of high purity polycrystalline cBN sintered bodies synthesized by the direct conversion method under high pressure and high temperature have been investigated by hardness and transverse rupture strength (TRS) measurement in the temperature range of 20–1200 °C. It was confirmed that the hardness and TRS of the polycrystalline cBN depends strongly on the cBN grain size and the amount of residual (compressed) hBN in the sintered body. The fine-grained (<0.5 m) and high purity (cBN > 99.9%) polycrystalline sintered body synthesized at 7.7 GPa, 2200–2400°C has highest hardness and TRS at any temperature. The TRS of the sintered body shows a positive temperature dependence up to 1200 °C. The high hardness and high TRS at high temperature of the fine-grained high purity polycrystalline cBN suggest that the sintered body has high potential in cutting tool uses.     

Poly(tetrafluoroethylene)/(hexafluoropropylene) coatings for mitigating the corrosion of steel in a simulated geothermal environment

Study focused on investigating the usefulness of room temperature-curable poly(tetrafluoroethylene)/(hexafluoropropylene) as a polyfluorocarbon coating for mitigating corrosion of carbon steel in a simulated geothermal environment. Coated steel panels were exposed for up to 20 days in an autoclave containing 20,000 ppm CO₂-laden 13 wt.% NaCl solution at 200°C. The appearance of the coatings after 20 days exposure revealed that they adequately protected the underlying steel substrate against corrosion in this short-term exposure. However, the superficial layer of coating suffered hydrothermal oxidation, leading to conformational transformation of the fluorocarbon structure into a fragmental fluorocarboxylic acid derivative as the oxidation reaction product. This transformation generated three undesirable features: (1) an increase in the susceptibility of the coating surfaces to moisture; (2) a decline in the thermal stability of the coatings; (3) a reduction of the crystallinity of the polymer.     

A Novel Method of "Double delta Modulation" on Tracking Control of PWM converters

非线性跟踪控制是SPWM变换器的重要控制策略之一。提出了一种新型双重△调制跟踪控制方法,它由一个无滞环比较器和一个载波周期定时器组成。比较器产生PWM信号的上升沿,使得跟踪控制响应快,精度高;定时器决定PWM信号的下降沿,它保证了开关周期固定不变;文中提出了一个按周期对比较阈值进行预估调节的算法,该算法可使每个周期的平均跟踪误差均为零,同时可以抑制子谐振和跟踪失步。对三相四线电压跌落补偿系统电压跟踪的仿真研究证实了“双重△调制”策略和比较阈值的一步预估算法的有效性。最后对一个单相半桥逆变器的电流跟踪控制给出了实验结果。     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321     

Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Thermosetting bismaleimide resins generating covalent and multiple hydrogen bonds

Prepolymerizations of 4,4′‐bismaleimidodiphenylmethane (BMI), diallyl isocyanurate (DAIC), and melamine (ML) at 160–170°C and subsequent compression molding at 200–280°C yielded cured BMI/DAIC/ML resins with feed molar ratios of 4/1/1, 3/1/1, and 2/1/1 (BMI‐DAIC‐ML411, 311, and 211). Similarly, cured BMI/DAIC 1/1 and BMI/ML 3/1 resins (BMI‐DAIC11 and BMI‐ML31) were prepared. The FT‐IR analysis revealed that the maleimide and allyl groups were almost consumed for all the cured resins, and the hydrogen bonding interaction became stronger with decreasing BMI contents for BMI‐DAIC‐MLs. Based on the cured structures elucidated from the FT‐IR result, the numbers of multiple hydrogen bonds and cross‐linking covalent bonds (N_MHB and N_CB), and total cross‐linking bond energy (E_TB) were evaluated to be 0, 7.92, and 618 for BMI‐DAIC‐ML411, 0.71, 7.81, and 627 for BMI‐DAIC‐ML311, and 0.95 mol kg^?1, 7.61 mol kg^?1, and 617 kcal kg^?1 for BMI‐DAIC‐ML211, respectively. A higher order of glass transition and 5% weight loss temperatures for BMI‐DAIC‐MLs was 411 > 311 > 211 in accordance with a higher order of N_CB. BMI‐DAIC‐MLs displayed a weak tan δ peak at 70–150°C due to dissociation of the hydrogen bonds. The flexural strength and modulus of BMI‐DAIC‐ML311 were higher than those of BMI‐DAIC‐ML411 in accordance with the difference of E_TB. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43121.     

Integrating local action elements for action analysis

In this paper, we propose a framework for human action analysis from video footage. A video action sequence in our perspective is a dynamic structure of sparse local spatial–temporal patches termed action elements, so the problems of action analysis in video are carried out here based on the set of local characteristics as well as global shape of a prescribed action. We first detect a set of action elements that are the most compact entities of an action, then we extend the idea of Implicit Shape Model to space time, in order to properly integrate the spatial and temporal properties of these action elements. In particular, we consider two different recipes to construct action elements: one is to use a Sparse Bayesian Feature Classifier to choose action elements from all detected Spatial Temporal Interest Points, and is termed discriminative action elements. The other one detects affine invariant local features from the holistic Motion History Images, and picks up action elements according to their compactness scores, and is called generative action elements. Action elements detected from either way are then used to construct a voting space based on their local feature representations as well as their global configuration constraints. Our approach is evaluated in the two main contexts of current human action analysis challenges, action retrieval and action classification. Comprehensive experimental results show that our proposed framework marginally outperforms all existing state-of-the-arts techniques on a range of different datasets.