Study of the combined use of ground probing radar and electric profiling in soil exploration

Bulletin of Engineering Geology and the Environment - To explore the shallow structure of the ground, the combined use of ground probing radar and electric profiling was tested. As a result, it is...     

Soluble and colorless polyimides with polyalicyclic structures [1]

Two tetracarboxylic dianhydrides with polyalicyclic structure, bicyclo[2.2.2]octane-2-endo, 3-endo, 5-exo, 6-exo-2,3:5,6-dianhydride (5a) and the all-exo isomer (5b), were synthesized in six steps using phthalic acid as a starting material. The dianhydrides were polymerized at 85–105°C in well-purified DMAc with aromatic diamines which were purified by two recrystallizations and then sublimation. The polyimides formed flexible and tough films, and were soluble in aprotic polar solvents such as DMAc. The 5%-weight loss temperatures were over 450°C. The polyimides possessed glass-transition temperatures in the range from 211 to 385°C. The polyimides films had a tensile modulus range of 1.5–2.6 GPa, a tensile strength range of 52–96 MPa, and an elongation range at break of 3–11%. The polyimide films showed cutoffs at wavelengths shorter than 320 nm and were entirely colorless. The colorlessness of the polyimide films was maintained up to 200°C when heated in air and to 400°C in a N₂ atmosphere.     

Crystallographic Texture Development in Bismuth Sodium Titanate Prepared by Reactive-Templated Grain Growth Method

Bi_0.5Na_0.5TiO₃ (BNT) and 0.94Bi_0.5Na_0.5TiO₃·0.06BaTiO₃ (BNT–BT) bulk ceramics with extensive 〈100〉 texture were prepared by the reactive-templated grain growth method, using platelike Bi₄Ti₃O₁₂ (BIT) particles as templates for BNT. Calcined compacts were composed of matrix grains with random orientation and 〈100〉-oriented grains transformed from aligned BIT particles, and the texture developed by the growth of oriented grains during sintering. Ceramics with extensive texture were obtained by using the starting mixture containing the maximum concentration of platelike BIT to form the maximum volume fraction of oriented grains.     

CVCF inverter based on nonlinear control of instantaneous active and reactive power and its operation characteristics

This paper describes a direct‐power‐controlled CVCF inverter and presents its experimentally examined operation characteristics. The most important feature of this strategy is the direct selection of the switching states of the CVCF inverter to restrict errors between the feedback and command values of active and reactive power. In addition, this paper presents a theoretical analysis of the relationship between the instantaneous power and the switching state, which is essential for deriving a switching‐state table for the controller. The feasibility of the proposed method was verified through several computer simulations and experimental tests using a 2.0‐kVA prototype setup. The output voltages were confirmed to be stable sinusoidal waveforms with a total harmonic distortion of 1.13% under nonlinear load conditions. Excellent voltage balance was achieved by the proposed strategy even under unbalanced load conditions. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(3): 62–69, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21023     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

Efficiency-enhanced cost-volume filtering featuring coarse-to-fine strategy

Multimedia Tools and Applications - Cost-volume filtering (CVF) is one of the most widely used techniques for solving general multi-labeling problems based on a Markov random field (MRF). However...     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.     

Feedback control of decoupled bending and torsional vibrations of flexible beams

In this article, we consider a flexible beam with a rigid body, of which the bending vibration and the torsional vibration are decoupled. Therefore we need two control motors to suppress the vibrations. Each set of dynamic equations is treated in the form of an appropriate Hilbert space. A stabilizing feedback control law of each rotation motor will be established on the basis of modal analysis. A set of experiments has been carried out, and the results demonstrate the effectiveness of the dynamic model and the proposed control law. © 1994 John Wiley & Sons, Inc.