Development of a hybrid ECT sensor for JSFR SG double-wall tubes

A new design has been adopted for the steam generator (SG) tubes of the Japan Sodium-cooled Fast Reactor (JSFR) using double-wall tubes. This paper estimates and assesses the effectiveness of detecting defects in SG double-wall tubes of the JSFR by using combined high-frequency eddy current testing (ECT) and low-frequency remote field eddy current sensors. We confirm that the proposed hybrid ECT sensor is highly sensitive to small defects, fatigue cracks, and other defects even when located under support plates of tubes. The parameters of the hybrid ECT sensor are designed and optimized to detect small defects using accurate numerical simulations based on the finite element method, using an in-house developed code. The sensitivity and high performance of the hybrid ECT sensor was validated with experimental measurements.     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.     

Fracture and acoustic emission characteristics of glass fiber reinforced plastics panels for hot water

This study deals with the fracture process and acoustic emission (AE) characteristics of a randomly oriented E-glass fiber mat reinforcement with a crosslinked polyester. These panels were evaluated after they were immersed in hot water. The fiber volume content of the panel was 19%. Glass fiber reinforced plastics (GFRP) panels wer immersed in water at 81°C. Bending and AE monitoring tests were Performed and after bending, the cross-section of the specimen was observed by an optical microscope and SEM. The influence of degradation, due to water immersion, on the changes of fracture process of GFRP is discussed. The dominant fracture mode of the virgin specimen was matrix cracks, whereas that of the immersed specimen was debondings at the fiber bundle/matrix and fiber/matrix interfaces. This change was caused by reduction of the bonding strength at the interface. The scale of fracture can be estimated by both AE amplitude and AE energy and this estimation method was used to estimate the fracture mode changes of GFRP panels immersed in hot water.     

Evaluation of surfactant-aided degumming of vegetable oils by membrane technology

The first step in the process of vegetable oil refining is degumming, in which phospholipids and mucilaginous gums are removed that otherwise result in a low-grade oil. A membrane process is remarkably simple yet potentially offers many advantages in degumming. Studies were conducted on surfactant-aided membrane degumming with soybean and rapeseed oils in a magnetically stirred flat membrane batch cell with different types of microfiltration membranes. The reduction of phospholipids in soybean oil was in the range of 85.8–92.8% during the membrane process. The phosphorus content of membrane permeates of soybean oil was in the range of 20–58 mg/kg. Crude rapeseed oil contained higher amount of nonhydratable phospholipids and hence resulted in lower reduction in phospholipids, in the range of 66.4–83.2%. Addition of hydratable phospholipids could improve the efficiency of degumming in the membrane process without using any electrolyte, resulting in improvement of quality as well as quantity of the phospholipids.     

Grafting of poly(ethylene-block-ethylene oxide) onto a vapor grown carbon fiber surface by γ-ray radiation grafting

To modify the surface of vapor grown carbon fiber (VGCF), poly(ethylene-block-ethylene oxide) (PE-b-PEO, M_n=1400, PEO content=50 wt%) was successfully grafted onto the surface by using γ-ray irradiation of the PE-b-PEO-adsorbed VGCF in solvent-free system. It is found that the percentage of polymer grafting reached 15.0% when the PE-b-PEO-adsorbed VGCF was irradiated by γ-ray over 40 kGy dose at 110 °C, but at the lower irradiation temperature of 75 °C, the grafting reaction scarcely proceeded. This indicates that polymer radicals formed by γ-ray irradiation were successfully trapped by VGCF surface above melting point of PE-b-PEO. On the other hand, when the dispersion of VGCF in THF solution of PE-b-PEO was irradiated, the percentage of PE-b-PEO grafting was less than 4.0%. It was confirmed by a field-emission scanning electron microscope (FE-SEM) that the surface of the VGCF was uniformly covered by grafted PE-b-PEO. In addition, the surface free energy of ungrafted and PE-b-PEO-grafted VGCF was determined.     

Quantitative analysis of energy-efficiency strategy on CO2 emissions in the residential sector in Japan – Case study of Iwate prefecture

This study examines the economics of energy-efficiency strategies for reducing CO₂ emissions in the residential sector in Japan from the perspective of regional characteristics. For this study, the residential sector in Iwate prefecture was selected as representative of rural areas in Japan. In order to promote purchases of energy-efficient consumer appliances, the prefectural government is presumed to reimburse purchasers a part of the cost difference between energy efficient and conventional appliances. This paper begins with a discussion of the prefecture’s financial support for purchasers of energy efficient appliances and assumes that the payments come from prefectural government funds. This paper then looks at the effect of a carbon-tax refund on the reduction of CO₂ emissions. The results show that, if half of the households use energy-efficient appliances, then CO₂ emissions in the residential sector in the year 2020 will decreases from the BAU scenario, 0.726 Mt-C to 0.674 Mt-C. However, the Iwate prefectural government expends $105 million annually, which is 1.5% of the total tax revenue in the year 2003. The carbon-tax refund effectively encourages further reductions in CO₂ emissions. Under the $20/tC carbon tax, proposed by the Ministry of the Environment, the carbon-tax refund leads to a reduction in residential CO₂ emissions from 0.726 Mt-C to 0.712 Mt-C.     

Enhancement of etch rate for preparation of nano-sized ion-track membranes of poly(vinylidene fluoride): Effect of pretreatment and high-LET beam irradiation

We investigated how pretreatment and high-LET beam irradiation affected the ion-track dissolution rate in poly(vinylidene fluoride) (PVDF) films by SEM observations and conductometric analysis in order to develop the preparation methodology of nano-sized ion-track membranes. PVDF thin films irradiated with four types of ion beams were exposed to a 9 mol/dm³ KOH aqueous solution after their storage in air at 120 °C. This heating treatment was found to enhance the etch rate in the latent track, both in the inner core and outer halo regions, without changing that in the bulk, probably due to the formation of parasitic oxidation products facilitating the introduction of the etching agent to improve the etchability. Additionally, the irradiation of heavier higher-LET ions, causing each track to more activated sites (like radicals), was preferable for achieving effective etching.     

Effect of anisotropic yield functions on the accuracy of hole expansion simulations

The deformation behavior of 780 MPa grade dual-phase steel sheet subjected to hole expansion is investigated both experimentally and analytically to clarify the effect of the material model (anisotropic yield function) on the predictive accuracy of finite element analysis of hole expansion. Biaxial tensile tests of the material were conducted; contours of plastic work and the directions of plastic strain rates are precisely measured and are in good agreement with those predicted from the Yld2000-2d yield function with an exponent of 4 ( [Barlat et al., 2003] and [Yoon et al., 2004]). Finite element and experimental analyses on the hole expansion of the material were conducted. The Yld2000-2d yield function with an exponent of 4 provides closer agreement with the experimental results than other yield functions. Consequently, the anisotropic yield functions significantly affect the predictive accuracy of the deformation behavior of the steel sheet subjected to hole expansion, and the biaxial tensile test is effective for identification of the appropriate anisotropic yield function to be used for hole expansion simulation.