Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

Plasma copolymer membranes of acrylic acid and the adsorption of lysozyme on the surface

Plasma copolymerization was carried out from the monomer mixtures of acrylic acid with hexamethylxdisilozane and hexametydisillazane, and the membranes composed of the Si-C and/or Si-O networks sustaining carboxylic acid group were fabricated. The carboxylic acid contents were dependent on the discharge power conditions as well as the monomer ratio, and carboxylic acid was introduced at the more density in the polymerization by plasmas under the moderate power conditions. The plasma polymer coatings were effective for the adsorption of lysozyme especially on the plasma copolymer films of acrylic acid.     

Global adaptive stabilization of infinite-dimensional systems

The purpose of this paper is to show that a first-order adaptive regulator globally stabilizes a class of infinite-dimensional systems having no right half plane zeros. Knowledge of the spectrum of the model's high-frequency gain is not required.     

Bile Acid–Drug Interaction via Organic Anion-Transporting Polypeptide 4C1 Is a Potential Mechanism of Altered Pharmacokinetics of Renally Excreted Drugs

Patients with liver diseases not only experience the adverse effects of liver-metabolized drugs, but also the unexpected adverse effects of renally excreted drugs. Bile acids alter the expression of renal drug transporters, however, the direct effects of bile acids on drug transport remain unknown. Renal drug transporter organic anion-transporting polypeptide 4C1 (OATP4C1) was reported to be inhibited by chenodeoxycholic acid. Therefore, we predicted that the inhibition of OATP4C1-mediated transport by bile acids might be a potential mechanism for the altered pharmacokinetics of renally excreted drugs. We screened 45 types of bile acids and calculated the IC₅₀, K_i values, and bile acid–drug interaction (BDI) indices of bile acids whose inhibitory effect on OATP4C1 was >50%. From the screening results, lithocholic acid (LCA), glycine-conjugated lithocholic acid (GLCA), and taurine-conjugated lithocholic acid (TLCA) were newly identified as inhibitors of OATP4C1. Since the BDI index of LCA was 0.278, LCA is likely to inhibit OATP4C1-mediated transport in clinical settings. Our findings suggest that dose adjustment of renally excreted drugs may be required in patients with renal failure as well as in patients with hepatic failure. We believe that our findings provide essential information for drug development and safe drug treatment in clinics.     

Passive piezoelectric single-side MEMS DC current sensor with five parallel PZT plates applicable to two-wire DC electric appliances without using cord separator

A passive (power-less), non-contact macro-scale piezoelectric bimorph DC current sensor to satisfy the increasing needs of DC power supply for monitoring the electricity consumption by either one-wire or two-wire appliance cord was proposed at our laboratory previously. In present study however, a MEMS-scale piezoelectric single-side DC current sensor, comprised of five parallel PZT plates, was further proposed and micro-fabricated for preliminarily examination. A micro magnet was fixed by manipulator onto the PZT cantilever tip to the theoretically pinpointed position of the center plate. Different from the results of the macro-scale piezoelectric bimorph DC current sensor, impulsive piezoelectric output voltages accompanying with a gradual decrease in decay were detected when the applied DC electric current was varied from 0.5 to 2.5 A. A linear relationship between the detected peak value of the impulse output voltage and the applied DC electric current was also obtained but with a higher slope compared to the result of the macro-scale piezoelectric bimorph DC current sensor.     

A three-dimensional microfluidic tumor cell migration assay to screen the effect of anti-migratory drugs and interstitial flow

Most anti-cancer drug screening assays are currently performed in two dimensions, on flat, rigid surfaces. However, there are increasing indications that three-dimensional (3D) platforms provide a more realistic setting to investigate accurate morphology, growth, and sensitivity of tumor cells to chemical factors. Moreover, interstitial flow plays a pivotal role in tumor growth. Here, we present a microfluidic 3D platform to investigate behaviors of tumor cells in flow conditions with anti-migratory compounds. Our results show that interstitial flow and its direction have significant impact on migration and growth of hepatocellular carcinoma cell lines such as HepG2 and HLE. In particular, HepG2/HLE cells tend to migrate against interstitial flow, and their growth increases in interstitial flow conditions regardless of the flow direction. Furthermore, this migratory activity of HepG2 cells is enhanced when they are co-cultured with human umbilical vein endothelial cells. We also found that migration activity of HepG2 cells attenuates under hypoxic conditions. In addition, the effect of Artemisinin, an anti-migratory compound, on HepG2 cells was quantitatively analyzed. The microfluidic 3D platform described here is useful to investigate more accurately the effect of anti-migratory drugs on tumor cells and the critical influence of interstitial flow than 2D culture models.     

Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3

The respective influences of calcination, drying methods, and washing conditions on the morphologies, surface properties, and photocatalytic activities of TiO₂ powders prepared from acid treatments of BaTiO₃ were investigated. Rutile powder was obtained using the treatment under strong acid conditions. It possesses a bundle-like shape and comprises rutile nanorods. After calcination, characteristic voids were observed in the particles. Anatase powder was obtained by adjusting pH values of a BaTiO₃ suspension to 2.5-3. Drying at 110 °C engendered the formation of spheroidal anatase, although freeze-dried anatase particles assembled into a flake-like shape. The freeze-dried samples show lower crystallinity. With grafting Cu ions, rutile exhibited better photocatalytic performance for the decomposition of gaseous 2-propanol (IPA) under visible light, although it did not work effectively for anatase.     

Preparation of Au-loaded niobate nanosheets and their plasmon-driven photochemical reaction

Niobate nanosheets prepared by exfoliation of layered hexaniobate K₄Nb₆O₁₇ were sequentially decorated with two noble metal nanoparticles, gold and silver, through two-step photochemical reactions. First, cationic bis(ethylenediamine)gold(III) ions were electrostatically adsorbed on the anionic niobate nanosheets, and reduced to gold nanoparticles by UV excitation of the photocatalytically active niobate nanosheets. Then, the surface plasmon band of the photodeposited gold nanoparticles was excited with visible light, by which the silver cations introduced to the system together with citrate anions were reduced to silver nanoparticles. Spectroscopic and transmission electron microscopic observations indicated the formation of morphologically different silver nanoparticles, for example nanorods and core-shell particles.     

Experimental analysis of 2D-unsteady temperature field by using Mach-Zehnder interferogram images

A measurement method for an unsteady temperature field by using a Mach-Zehnder interferometer and image processing technique is presented. In this study, the results measured by this method were compared with the calculated results under Reynolds numbers (Re = UL/v) ranging to less than 350 in the steady-state. The unsteady characteristics of the local Nusselt numbers (Nu_x = α_xL/λ) around an elastically vibrating plate were investigated under the conditions that the reduced frequency (N = 1/Ro) ranged from 4.8 to 8.6 and the amplitude of vibration was kept small relative to the plate length. In this study it was clarified that the distributions of the Local Nusselt numbers were observed flutteringly, and that the phase of the time-averaged Nusselt number is delayed compared to the phase of the velocity at the trailing edge. These results indicate that the enhancement of the time-averaged heat transfer coefficient around the vibrating plate depended on the Rossby number. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 88–102, 1996     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996