A new blind deconvolution algorithm based on the probability distribution method

Blind deconvolution is a method of recovering transmitted signals from only received signals. The probability distribution method is one of the blind deconvolution methods. This method has two problems: it has slower convergence and its reliability is lower. In this paper, we propose a new algorithm for solving these two problems. The proposed algorithm is as follows. (1) It is based on the adaptive processing with each sample. (2) Kurtosis is adaptively estimated by recovered signals with each sample. (3) Cost function is decided by kurtosis. (4) Transmitted signals are recovered by received signals using decided cost function on the sample time. We confirm the validity of the new algorithm by computer simulation. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 56–65, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20317     

The selective sorption of D,L-amino acids by chemically modified chitosan gels and its application to liquid chromatography

The sorption of D ,L -amino acids, DNP-L -amino acids and dipeptides by N-octanoyl- and N-benzoyl-chitosan gels was investigated under various conditions. The results indicate that optical resolution of D ,L -amino acids by liquid column chromatography has been achieved, using the chemically modified chitosan gels as a stationary phase.     

Proposal of a Simple Method for Assessing the Susceptibility of Naturally Deposited Clay Grounds to Large Long-Term Settlement due to Embankment Loading

A simple method that utilizes the results of laboratory tests has been proposed for determining the susceptibility of soft clay grounds to large residual consolidation settlement due to embankment loading. It was found that there is a possibility of large long-term settlement if the sensitivity and compression index ratios of the clay material that constitutes the ground are equal to or more than 8.0 and 1.5, respectively. The compression index ratio is defined in this paper as the ratio (Cc/Ccr) of the steepest gradient of the compression curve of an undisturbed sample to that of the remolded sample. Through the SYS Cam-clay model, an elasto-plastic constitutive model that describes the actions of the soil skeleton structure, it was found that clays with large sensitivity and compression index ratios are characterized by initially highly structured soils and that decay/upgradation of the structure can easily occur due to plastic deformation. In addition, by following Schmertmann's graphic method for in-situ compression curve (1953), this paper proposes a method of deducing the in-situ initial conditions from the results of laboratory consolidation tests on undisturbed samples. These investigations revealed not only that large delayed settlement is facilitated in clays, which have higher degrees of structure and faster rates of structural decay, but also that the Δe method and other simple methods of predicting settlement may underestimate the amount of settlement.     

Resonance surface X-ray scattering technique to determine the structure of electrodeposited Pt ultrathin layers on Au(1 1 1) surface

It is demonstrated that resonance surface X-ray scattering (RSXS), in which incident X-ray energy close to the Pt L_III absorption edge (11.55 keV) is used, is very useful for the determination of the structure of electrodeposited Pt thin layers on a Au(1 1 1) surface. This technique was applied to characterize the structure of electrodeposited Pt layers on Au(1 1 1) substrates prepared under two extreme conditions, which are known to provide rough and atomically flat layers. Detailed structural information was obtained by RSXS measurements and it was confirmed that the structures of the Pt layers were as reported. Pt atoms of the atomically flat monolayer were found to be situated at the threefold hollow cubic closest packing (ccp) sites of the Au(1 1 1)-(1 × 1) surface.     

Preparation of Au-loaded niobate nanosheets and their plasmon-driven photochemical reaction

Niobate nanosheets prepared by exfoliation of layered hexaniobate K₄Nb₆O₁₇ were sequentially decorated with two noble metal nanoparticles, gold and silver, through two-step photochemical reactions. First, cationic bis(ethylenediamine)gold(III) ions were electrostatically adsorbed on the anionic niobate nanosheets, and reduced to gold nanoparticles by UV excitation of the photocatalytically active niobate nanosheets. Then, the surface plasmon band of the photodeposited gold nanoparticles was excited with visible light, by which the silver cations introduced to the system together with citrate anions were reduced to silver nanoparticles. Spectroscopic and transmission electron microscopic observations indicated the formation of morphologically different silver nanoparticles, for example nanorods and core-shell particles.     

Effects of casting solvents on characteristics of organic EL devices containing poly(l-glutamate) as hole-transport material

The characteristics of EL devices containing α-helical poly(l-glutamate) and having a carbazole side chain (PCELG) were found to strongly depend on the casting solvents. Among EL devices fabricated using chlorine-containing casting solvents such as 1,2-dichloroethane (DCE), 1,1,2,2-tetrachloroethane (TCE), chloroform (CHCl₃), and monochlorobenzene (?-Cl), the EL device fabricated using the DCE solvent exhibited the maximum luminance (65.8 cd/m²). The difference between the threshold voltages of the devices ranged up to 6.0 V, despite their fabrication by using solutions with the same composition ratio. The maximal efficiency of the devices fabricated using the DCE solvent was found to be 20 times greater than that of the devices fabricated using TCE solvents. A comparison of the current densities and voltages among devices fabricated using different casting solvents at their maximal efficiencies showed that the maximal efficiencies tended to significantly increase in the order TCE < CHCl₃ < DCE solvents at similar voltages (～15 V), despite a lowering of the current density. The current density was considered to be directly related to the number of carriers injected into the device. The above-mentioned observations suggested that the maximal efficiency in these devices was not the hole and electron injection efficiencies, but the values of some parameters subsequent to carrier injection, such as the recombination rate, amount of excitons generated, and the diffusion length.     

Computer simulation of point defects in fcc metals using EAM potentials

The activation energies for the motion of interstitials and vacancies, vacancy clusters have been calculated using embedded atom potentials. The most exciting results obtained are that the stable interstitial configuration is a [1 0 0] split type and the saddle point was a body-centered interstitial. This is quite different from widely accepted computational results. The activation energies for the motion of vacancies, di-vacancies and tri-vacancies have been calculated. The atom above the center of a 60° tri-vacancy relaxes to the center of the tetrahedron in copper but does not relax to the center of the tetrahedron in silver. In the case of gold the energy relaxed to the center is very small and the atoms move around in the tetrahedron. The details depend upon the potentials.     

A three-dimensional microfluidic tumor cell migration assay to screen the effect of anti-migratory drugs and interstitial flow

Most anti-cancer drug screening assays are currently performed in two dimensions, on flat, rigid surfaces. However, there are increasing indications that three-dimensional (3D) platforms provide a more realistic setting to investigate accurate morphology, growth, and sensitivity of tumor cells to chemical factors. Moreover, interstitial flow plays a pivotal role in tumor growth. Here, we present a microfluidic 3D platform to investigate behaviors of tumor cells in flow conditions with anti-migratory compounds. Our results show that interstitial flow and its direction have significant impact on migration and growth of hepatocellular carcinoma cell lines such as HepG2 and HLE. In particular, HepG2/HLE cells tend to migrate against interstitial flow, and their growth increases in interstitial flow conditions regardless of the flow direction. Furthermore, this migratory activity of HepG2 cells is enhanced when they are co-cultured with human umbilical vein endothelial cells. We also found that migration activity of HepG2 cells attenuates under hypoxic conditions. In addition, the effect of Artemisinin, an anti-migratory compound, on HepG2 cells was quantitatively analyzed. The microfluidic 3D platform described here is useful to investigate more accurately the effect of anti-migratory drugs on tumor cells and the critical influence of interstitial flow than 2D culture models.     

Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3

The respective influences of calcination, drying methods, and washing conditions on the morphologies, surface properties, and photocatalytic activities of TiO₂ powders prepared from acid treatments of BaTiO₃ were investigated. Rutile powder was obtained using the treatment under strong acid conditions. It possesses a bundle-like shape and comprises rutile nanorods. After calcination, characteristic voids were observed in the particles. Anatase powder was obtained by adjusting pH values of a BaTiO₃ suspension to 2.5-3. Drying at 110 °C engendered the formation of spheroidal anatase, although freeze-dried anatase particles assembled into a flake-like shape. The freeze-dried samples show lower crystallinity. With grafting Cu ions, rutile exhibited better photocatalytic performance for the decomposition of gaseous 2-propanol (IPA) under visible light, although it did not work effectively for anatase.