Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model

We present a compact formula for describing the mean frictional forces acting on a molecule in multicomponent systems. The friction-based diffusion theory of Zielinski and Hanley was extended to newly include the friction-average molar velocity as a reference frame. The results showed that the previous diffusion theories are unified by the friction-average concept by properly choosing the average velocity. The present model based on the diffusivity-related molar average velocity provides better predictions for the diffusive flux in a ternary miscible liquid compared to the other existing theories. The application of the model in phase-separating ternary systems revealed that the introduction of a highly diffusive third component into demixing polymer blends promotes a particular enhancement of the spinodal decomposition due to the difference in the frictional interactions between polymers.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

High tensile strength fiber of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] processed by two‐step drawing with intermediate annealing

High tensile strength fibers of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] [P(3HB‐co‐3HH)], a type of microbial polyesters, were processed by one‐step and two‐step cold‐drawn method with intermediate annealing. Thermal degradation behaviors were characterized by differential scanning calorimeter and gel permeation chromatography measurements. Thermal analyses were revealed that molecular weights decreased drastically within melting time at a few minute. One‐step cold‐drawn fiber with drawing ratio of 10 showed tensile strength of 281 MPa, while tensile strength of as‐spun fiber was 78 MPa. When two‐step drawing was applied for P(3HB‐co‐3HH) fibers, the tensile strength was led to 420 MPa. Furthermore, the optimization of intermediate annealing condition leads to enhance the tensile strength at 552 MPa of P(3HB‐co‐3HH) fiber. Wide‐angel X‐ray diffraction measurements of these fibers suggest that the fibers with high tensile strength include much amount of the planer‐zigzag conformation (β‐form) as molecular conformation together with 2₁ helix conformation (α‐form). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41258.     

Numerical simulations of annular extrudate swell of polymer melts

Numerical viscoelastic simulations were carried out using a K-BKZ type of separable integral constitutive equation. Both reversible and irreversible models were tried for several types of damping functions to calculate the annular extrudate behavior of high-density polyethylene (HDPE). There are two aims in this study; first, to clarify the properties of these dumping functions, and second, to investigate the influence of rheological characteristics on annular extrudate swell. In these numerical simulations, relaxation spectrum and shear viscosity were fixed, and the other characteristics were varied. The reversional response of the damping function mainly has an effect on the magnitude of the area swell even if the die is straight. The irreversible model expresses the experimental results of annular extrudate swell better than the reversible model. The accurate fitting of N1 by the damping model is important for predicting it. The magnitude of N1 predicted from the Wagner exponential model is lower than that of the PSM model, and the area swell shows the same tendency as N1. A modified PSM model that allows the N1 curve to shift can fit the magnitude of area swell. The relationship between the diameter and thickness of the extrudate depends on N2/N1, and it was estimated by simple linear elasticity of solids. The time dependent viscosity varies with the type of damping function, and it influences the time-dependent swell.     

加压下二元液体混合物的过热极限

测定了正戊烷等正烷烃及环烷烃二元液体混合物在不同压力(0.1-2. 1MPa)和不同组成下的过热极限,从热力学及动力学角度进行了理论分析及预测,并提出简化计算方法. 对传热、闪蒸等气液传质过程的改进及安全生产,具有重要意义。     

Characterization of a Novel Thermostable Dye-Linked l-Lactate Dehydrogenase Complex and Its Application in Electrochemical Detection

Flavoenzyme dye-linked l-lactate dehydrogenase (Dye-LDH) is primarily involved in energy generation through electron transfer and exhibits potential utility in electrochemical devices. In this study, a gene encoding a Dye-LDH homolog was identified in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. This gene was part of an operon that consisted of four genes that were tandemly arranged in the Sf. tokodaii genome in the following order: stk_16540, stk_16550 (dye-ldh homolog), stk_16560, and stk_16570. This gene cluster was expressed in an archaeal host, Sulfolobus acidocaldarius, and the produced enzyme was purified to homogeneity and characterized. The purified recombinant enzyme exhibited Dye-LDH activity and consisted of two different subunits (products of stk_16540 (α) and stk_16550 (β)), forming a heterohexameric structure (α3β3) with a molecular mass of approximately 253 kDa. Dye-LDH also exhibited excellent stability, retaining full activity upon incubation at 70 °C for 10 min and up to 80% activity after 30 min at 50 °C and pH 6.5–8.0. A quasi-direct electron transfer (DET)-type Dye-LDH was successfully developed by modification of the recombinant enzyme with an artificial redox mediator, phenazine ethosulfate, through amine groups on the enzyme’s surface. This study is the first report describing the development of a quasi-DET-type enzyme by using thermostable Dye-LDH.     

EFFECT OF STEPWISE CHANGE OF DRYING RATE ON MICROSTRUCTURE EVOLUTION IN POLYMER FILMS

The effect of the drying rate of the solvent on microstructure evolution in thin films of immiscible polystyrene/polycarbonate blends was investigated by applying a stepwise change in air velocity. The polymer blend was dissolved in tetrahydrofuran and cast on a glass substrate to form a thin liquid film. The drying rate of the solvent was measured by a gravimetric technique, and the phase-separated structure in the film was observed by optical microscopy. The results indicated that cellular structures of droplet arrays were formed in the phases evolved primarily during the early stage of drying, and the droplets then coalesced in the intermediate stage to form bigger droplets. The size of the first evolved phase decreased with increasing time at a high drying rate, whereas larger droplets were obtained with longer high drying rate regimes. These results suggested that the droplets were induced by secondary phase separation which was strongly affected by the drying rate of the solvent.     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Analysis of damaged material containing periodically distributed elliptical microcracks by using the homogenization method based on the superposition method

The presence of multiple microcracks in a structural component causes material degradation such as reduction in the stiffness or reduction in the fracture toughness of the component. In this paper, the homogenization method is used to evaluate mechanical properties of the damaged material. The adaptation of the superposition method to the homogenization method is also presented. The proposed method makes use of the finite element solution of uncracked solid and the analytical solution. The effective elastic moduli of damaged materials containing lattice-distribution microcracks are estimated by the proposed method. Furthermore, the stress fields and the stress intensity factors of the elliptical microcracks in the damaged material at a micro-mechanics scale are evaluated to illustrate microscopic behavior such as crack interaction.