Synthesis of Sintered Diamond with High Electrical Resistivity and Hardness

Diamond and diamond-ultrafine Co powder mixtures were sintered at 7.7 GPa and 1800° to 2000°C. A well-sintered body with a fine-grained homogeneous microstructure, high hardness, and high electrical resistivity was produced when a diamond-5 vol% Co powder mixture was used as the starting material.     

A New Approach to Suppress the Effect of Machining Error for Waveguide Septum Circular Polarizer at 230 GHz Band in Radio Astronomy

A new stepped septum-type waveguide circular polarizer (SST-CP) was developed to operate in the 230 GHz band for radio astronomy, especially submillimeter-band VLBI observations. For previously reported SST-CP models, the 230 GHz band is too high to achieve the design characteristics in manufactured devices because of unexpected machining errors. To realize a functional SST-CP that can operate in the submillimeter band, a new method was developed, in which the division surface is shifted from the top step of the septum to the second step from the top, and we simulated the expected machining error. The SST-CP using this method can compensate for specified machining errors and suppress serious deterioration. To verify the proposed method, several test pieces were manufactured, and their characteristics were measured using a VNA. These results indicated that the insertion losses were approximately 0.75 dB, and the input return losses and the crosstalk of the left- and right-hand circular polarization were greater than 20 dB at 220–245 GHz on 300 K. Moreover, a 230 GHz SST-CP was developed by the proposed method and installed in a 1.85-m radio telescope receiver systems, and then had used for scientific observations during one observation season without any problems. These achievements demonstrate the successful development of a 230 GHz SST-CP for radio astronomical observations. Furthermore, the proposed method can be applicable for observations in higher frequency bands, such as 345 GHz.     

Sex hormonal modulation of hyperbolic discount factor in men.

Hormones in the brain have many types of visceral influences on social behavior and economic decision-making. Although hormone-associated visceral effects attract attention in neuroeconomics, little is known regarding the relationship between sex hormones and hyperbolic discounting. Furthermore, although the “discount factor” (a parameter indicating patience in intertemporal choice) is economically relevant and has neural correlates, most neuroeconomic studies on intertemporal choice have been focusing on neuromodulation of logged discount rates, which sometimes results in difficulty in interpretation. This study was aimed to examine linear correlations between chronic sex hormone levels and hyperbolic discount factors of gains and losses in healthy male students. Participants’ salivary sex hormone (testosterone) levels were also assessed. We observed a positive linear relationship between testosterone levels and hyperbolic discount factor of gains; while no linear relationship between testosterone levels and discount factor of losses was observed. The results indicate that (i) chronic elevation in testosterone may be associated with patience (indicated by a discount factor) in intertemporal choice on gains, (ii) testosterone is unrelated to discounting of delayed losses. Implications for sex hormone-related visceral effects on problematic decision-making (e.g. addiction) and possible neuroendocrinological mechanism (e.g. conversion of testosterone into female hormones in the brain) are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A three-dimensional,clothed human thermal model

We have developed a three-dimensional clothed human thermal model for predicting physiological responses to temperature and humidity within clothing by considering the thermal properties of fabrics, clothing ensembles, and their designs. The model is a coupled simulation system of a human thermal model and a clothing thermal model. The model performance was investigated by comparing its predictions with experimental data. The following results were obtained. (1) The model predictions of skin temperature distributions and the micro-climate within clothing basically agreed with experimental data. (2) The skin temperatures of clothed body parts were higher than the corresponding body parts in the nude condition, and the skin temperatures of the hand and foot were higher than those in the nude condition, both in the model predictions and in the experimental data. (3) The model prediction of total moisture transfer was almost the same as obtained from the experimental data. 1998 Scripta Technica, Heat Trans Jpn Res, 26(8): 554–566, 1997     

Structure and viscoelastic properties of segmented polyurethane blends

Structure and viscoelastic properties of segmented polyurethanurea (SPU) blends were investigated. The glass transition temperature (T_g) of poly(tetramethylene glycohol) (PTMG) in a soft-segment block of the component SPU increased with decreasing molecular weight of PTMG. The blend samples showed two T_gs of PTMG in the temperature dispersions of the loss modulus (E″) and loss tangent (tan δ). The value of E′ in the leathery region for the blend specimens was trongly affected by the morphology. The blends were considered to have a morphology where PTMG differing in molecular weight was localized. © 1996 John Wiley & Sons, Inc.     

The terminal protein of the linear DNA plasmid pGKL2 shares an N-terminal domain of the plasmid-encoded DNA polymerase

The 36K protein attached at the 5′ end of the linear DNA plasmid pGKL2 from the yeast Kluyveromyces lactis was first purified and characterized. The terminal protein was purified from cells (1 kg wet weight) by ammonium sulphate precipitation and two rounds of centrifugation to equilibrium in CsCl gradients. The pGKL2 was present only in the post-microsomal supernatant. Approximately 10 mg of the purified pGKL2 was recovered and digested with DNase I. The terminal protein (final ca. 0·8 mg) was homogeneous by electrophoresis and we determined the N-terminal amino acid sequence up to ten residues, showing that it existed in the cryptic N-terminal domain of pGKL2-ORF2 (DNA polymerase) sequence.     

Properties and substrate specificities of proteolytic enzymes from the edible basidiomycete Grifola frondosa

Highly active proteolytic enzymes are found in the fruiting bodies of Grifola frondosa. The general properties and substrate specificities of these proteases from G. frondosa (ProGF) were studied. The optimal pH for ProGF activity was pH 3 or 7 using hemoglobin or Hammersten casein as a substrate, respectively. The ProGF exhibited over 70% of maximal activity within the pH range of 4.5–8.5. In terms of temperature, the ProGF were maximally active at 55 °C, while over 80% of maximal activity was observed within the range of 50–75 °C. These proteases were substrate-specific, mainly cleaving at Ala¹⁴-Leu¹⁵, Tyr¹⁶-Leu¹⁷, and Pro²⁸-Lys²⁹ bonds, with occasional cleavage of Phe²⁴-Phe²⁵ bonds in the oxidized insulin B-chain. The ProGF also liberated hydrophobic amino acids, such as valine, leucine, and phenylalanine, using the oxidized insulin B-chain as a substrate. When soy protein was used as a substrate, valine, leucine, phenylalanine, and tyrosine were selectively released from the hydrolysate. Thus, over the time course of incubation, the peptide concentration increased as the average peptide chain length decreased. These results indicate that the ProGF include both endopeptidases recognizing leucine, phenylalanine, and lysine at the P1′ position, and aminopeptidases preferentially releasing hydrophobic and aromatic amino acids such as valine, leucine, phenylalanine, and tyrosine.     

Steroid hormone profiles of urban and tidal rivers using LC/MS/MS equipped with electrospray ionization and atmospheric pressure photoionization sources

A highly sensitive and uncomplicated method of analyzing steroidal hormones in river and estuarine water samples was developed using a liquid chromatography tandem mass spectrometer equipped with an electrospray ionization (ESI) source and atmospheric pressure photoionization (APPI) source. Steroidal hormones included not only estrogen but also androgen and conjugates of these two. APPI displayed greater sensitivity than ESI for most of the unconjugated steroids examined, with very high sensitivity for testosterone and 4-androstene-3,17-dione in particular. For conjugated hormones, in contrast, ESI was more effective. The method developed was applied to the determination of hormones in the rivers of Osaka City and their estuaries, where the hormones detected were affected by the effluent from municipal wastewater treatment plants (WWTPs), and hormone concentration values were comparable to those reported in previous studies of such effluent. Because of the two-way flow and stagnancy of streams and watercourses, continuous input of steroidal hormones from WWTPs seems to bring about local accumulation. Levels of androgen were 1 order of magnitude lower than those of estrogen. Estrone, estrone 3-sulfate, and 4-androstene-3,17-dione were detected in almost all water samples, with maxima of 51, 5.1, and 6.4 ng L(-1), respectively.     

Direct synthesis of H2O2 acid solutions on carbon cathode prepared from activated carbon and vapor-growing-carbon-fiber by a H2/O2 fuel cell

Direct synthesis of H₂O₂ acid solutions was studied using a gas-diffusion cathode prepared from activated carbon (AC), vapor-growing-carbon-fiber (VGCF) and poly-tetra-fluoro-ethylene (PTFE) powders, with a new H₂/O₂ fuel cell reactor. O₂ reduction to H₂O₂ was remarkably enhanced at the three-phase boundary (O₂(g)-electrode(s)-acid(l)) at the [AC + VGCF] cathode. Fast diffusion processes of O₂ to the active surface and of H₂O₂ to the bulk acid solutions were essential for H₂O₂ accumulation. Synergy of AC and VGCF was observed for the H₂O₂ formation. RRDE and cyclic voltammetry studies indicated that the surface of AC functioned as the active phase for O₂ reduction to HO₂, and VGCF functioned as an electron conductor and a promoter to convert HO₂ to H₂O₂. A maximum H₂O₂ concentration of 353 mM (1.2 wt%) was accomplished under short-circuit conditions (current density 12.7 mA cm⁻², current efficiency 40.1%, geometric area of cathode 1.3 cm², reaction time 6 h).     

LSI implementation of a low-power 4×4-bit array two-phase clocked adiabatic static CMOS logic multiplier

As the density and operating speed of complementary metal oxide semiconductor (CMOS) circuits increases, dynamic power dissipation has become a critical concern in the design and development—of personal information systems and large computers. The reduction of supply voltage, node capacitance, and switching activity are common approaches used in conventional CMOS. In adiabatic switching circuits, the current flow through transistors can be significantly reduced by ensuring uniform charge transfer over the entire available time. This paper presents the simulation of this current in two-phase clocked adiabatic static CMOS logic (2PASCL) and conventional CMOS. From the SPICE simulations, at transition frequencies from 1 to 12 MHz, a 4×4-bit array 2PASCL multiplier shows a maximum reduction in power dissipation of 77% relative to that of a static CMOS. The measurement results of a 4×4-bit array 2PASCL multiplier demonstrate a 57% reduction compared to a 4×4-bit array two-phase clocked adiabatic dynamic CMOS logic (2PADCL). These results indicate that 2PASCL technology can be advantageous when applied to low-power digital devices operated at low frequencies, such as radio-frequency identification (RFID) tags, smart cards, and sensors.