Ethylene carbonate/ether solvents for electrolytes in lithium secondary batteries

An examination has been made of the effectiveness of ethylene carbonate(EC)/2-methyltetrahydrofuran(2-MeTHF) solvents incorporating LiAsF₆ as the solute as electrolytes in secondary lithium batteries. From —10 to 30 °C, the conductivities of EC/2-MeTHF are higher than those of 2-MeTHF and EC/propylene carbonate (PC). For lithium-on-lithium cycling in a half cell, the FOM (figure of merit) of lithium in EC/2-MeTHF has a value 2.2 to 2.7 times higher than that in 2-MeTHF and EC/PC. A coin cell of Li/amorphous V₂O ₅-P₂O₅ with EC/2-MeTHF clearly exhibits higher capacity and longer cycle life than cells with 2-MeTHF or EC/PC. It is concluded that EC/2-MeTHF is a promising electrolyte system for secondary lithium battery applications.     

The selective sorption of D,L-amino acids by chemically modified chitosan gels and its application to liquid chromatography

The sorption of D ,L -amino acids, DNP-L -amino acids and dipeptides by N-octanoyl- and N-benzoyl-chitosan gels was investigated under various conditions. The results indicate that optical resolution of D ,L -amino acids by liquid column chromatography has been achieved, using the chemically modified chitosan gels as a stationary phase.     

Fundamental study of high Q‐factor RF spiral inductor using carbonyl‐iron/epoxy composite magnetic core

In order to increase the Q‐factor of an RF spiral inductor used in the RF front‐end circuit of smartphone handsets, we introduced a carbonyl‐iron/epoxy composite magnetic core in the air‐core spiral inductor. The composite magnetic core, which was made by metal‐mask printing, consisted of carbonyl‐iron powder of 1.1 μm mean diameter and an epoxy resin matrix. We found that the 45 vol.% CIP composite magnetic core had a saturation magnetization of 0.9 T, relative permeability of ∼6, and loss tangent (tan δ) of ∼0.2 at 1 GHz. A two‐turn copper spiral inductor fabricated with the composite magnetic core filled only in the spacing between the conductor lines showed a clear Q‐factor increase of ∼29% compared to the air‐core spiral inductor at 1 GHz. Thus we obtained a substantial increase in the Q‐factor by the embedded composite magnetic core in the spacing between the conductor lines. The main reason for this is that the magnetic flux passing through the conductor lines was decreased by the magnetic core embedded in the spacing between conductor lines as a result of the magnetic flux passing mainly through the embedded magnetic core. Therefore, proximity effect is suppressed in the conductor line of the spiral coil. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

A novel MOSFET with vertical signal‐transfer capability for 3D‐structured CMOS image sensors

We have developed a novel MOSFET that can transfer signals vertically without through‐silicon vias but by using a fully depleted silicon‐on‐insulator (FDSOI) structure with its source region connected to the back electrodes as well as the front ones. A prototype MOSFET fabricated using the backside anisotropic wet etching technique has confirmed that the electrical characteristics measured from the front and the back electrodes are identical. The subthreshold factor S of the prototype was found to be 64.5 mV/decade, suggesting a good switching performance. Since the double‐sided MOSFET has vertical signal‐transfer capability and excellent operating characteristics, it is expected to contribute to developing a More‐than‐Moore type device of three‐dimensional integration such as pixel‐parallel image sensors. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Myopathology of the intrinsic laryngeal muscles in neurodegenerative diseases, with reference to the mechanism of vocal cord paralysis

To investigate the mechanism of the vocal cord abductor paralysis (VCAP) in the neurodegenerative diseases, the intrinsic laryngeal muscles (the crycothyroid, the interarytenoid, and the posterior crycoarytenoid muscles) from 41 autopsied cases were histologically examined: 10 cases of amyotrophic lateral sclerosis (ALS), 10 of Parkinson's disease (PD), 9 of multiple system atrophy (MSA), 4 of Machado-Joseph disease (MJD), 4 of progressive supranuclear palsy (PSP), 1 of familial amyloidotic polyneuropathy (FAP), and 3 of cerebrovascular diseases as a control. According to the distribution of the neurogenic changes among above-described three intrinsic laryngeal muscles, three forms were raised: 1. The totally paralytic form showing that all the three muscles developed neurogenic atrophy. This form includes ALS, MJD, and FAP. 2. The posterior muscle-paralytic form showing that only the posterior crycoarytenoid muscle was selectively involved. This form includes MSA. 3. The nonparalytic form showing no morphological abnormalities in any of the intrinsic laryngeal muscles. This type includes PD and PSP. In this nonparalytic form, supranuclear mechanism such as pyramidal or extrapyramidal tract involvement may cause VCAP through the increased laryngeal muscles tone. Considering that VCAP can be seen in any of the above-described forms, our results indicate that the mechanism of VCAP is different among the neurological disorders.     

High Levels of the Cleaved Form of Galectin-9 and Osteopontin in the Plasma Are Associated with Inflammatory Markers That Reflect the Severity of COVID-19 Pneumonia

Numbers of patients with coronavirus disease 2019 (COVID-19) have increased rapidly worldwide. Plasma levels of full-length galectin-9 (FL-Gal9) and osteopontin (FL-OPN) as well as their truncated forms (Tr-Gal9, Ud-OPN, respectively), are representative inflammatory biomarkers. Here, we measured FL-Gal9, FL-OPN, Tr-Gal9, and Ud-OPN in 94 plasma samples obtained from 23 COVID-19-infected patients with mild clinical symptoms (CV), 25 COVID-19 patients associated with pneumonia (CP), and 14 patients with bacterial infection (ID). The four proteins were significantly elevated in the CP group when compared with healthy individuals. ROC analysis between the CV and CP groups showed that C-reactive protein had the highest ability to differentiate, followed by Tr-Gal9 and ferritin. Spearman’s correlation analysis showed that Tr-Gal9 and Ud-OPN but not FL-Gal9 and FL-OPN, had a significant association with laboratory markers for lung function, inflammation, coagulopathy, and kidney function in CP patients. CP patients treated with tocilizumab had reduced levels of FL-Gal9, Tr-Gal9, and Ud-OPN. It was suggested that OPN is cleaved by interleukin-6-dependent proteases. These findings suggest that the cleaved forms of OPN and galectin-9 can be used to monitor the severity of pathological inflammation and the therapeutic effects of tocilizumab in CP patients.     

以辉锑矿为原料放电等离子烧结快速制备黝铜矿Cu_(12)Sb_4S_(13)及反应机理

采用辉锑矿为原料成功制备出Cu_(12)Sb_4S_(13)块体。研究以Sb_2S_3矿物为原料时烧结工艺对Cu_(12)Sb_4S_(13)合成的影响。在400 ～ 440℃温度区间内均可快速合成Cu_(12)Sb_4S_(13)块体且二次烧结能够进一步减小中间相CuSbS_2和Cu_3SbS_3。第二相Cu_3SbS_4和残留相CuS随着烧结时间的延长而降低。二次烧结前进行机械化球磨处理,干磨比湿磨更容易减小残留相。初次烧结块体的断面SEM和EDS能谱分析表明内部存在Cu或Cu_2S颗粒团聚现象。适当降低Cu或CuS摩尔量(化学计量比0.1 mol)能促进烧结块表面反应进行。烧结过程中,硫磺蒸汽压的导致烧结块表面成分和内部粉末的成分不同。     

Fault-tolerant control system of flexible arm for sensor fault by using reaction force observer

In recent years, control system reliability has received much attention with increase of situations where computer-controlled systems such as robot control systems are used. In order to improve reliability, control systems need to have abilities to detect a fault (fault detection) and to maintain the stability and the control performance (fault tolerance). In this paper, we address the vibration suppression control of a one-link flexible arm robot. Vibration suppression is realized by an additional feedback of a strain gauge sensor attached to the arm besides motor position. However, a sensor fault (e.g., disconnection) may degrade the control performance and make the control system unstable at its worst. In this paper, we propose a fault-tolerant control system for strain gauge sensor fault. The proposed control system estimates a strain gauge sensor signal based on the reaction force observer and detects the fault by monitoring the estimation error. After fault detection, the proposed control system exchanges the faulty sensor signal for the estimated one and switches to a fault-mode controller so as to maintain the stability and the control performance. We apply the proposed control system to the vibration suppression control system of a one-link flexible arm robot and confirm the effectiveness of the proposed control system by some experiments.