Elasto-plastic analysis of orthogonally stiffened plates with initial imperfections under uniaxial compression

In general, the stiffened plates consisting of steel plate elements are unavoidably accompanied by initial imperfections such as residual stresses and initial deflections, which have considerable effects on their ultimate strength. Therefore, it is needed for designing them to develop more rational method taking the ultimate strength influenced by initial imperfections into account rather than the conventional design method being on the basis of the linear elastic buckling theory.From this point of view, this study aims to evaluate rigorously the ultimate strength of orthogonally stiffened plate with initial imperfections under uniaxial in-plane compression. The elasto-plastic finite element method is applied to attain this purpose. By a happy combination of modal analytical technique and conventional finite element method, much reduction of the degree of freedom can be expected to be realized herewith. Some numerical calculations are performed by means of this rigorous method to examine the exactness of the analysis. Moreover, the numerical results are compared with the experimental ones.     

Effects of PbTiO 3 Seed Layer on the Characteristics of RF-Sputtered Pb(Zr 0.5 ,Ti 0.5 )O 3 Thin Films

The effects of seed layers on the characteristics of rf-sputtered lead zirconium titanate thin films were investigated. Prior to sputtering, PbTiO 3 seed layers (100 nm) were deposited onto the Pt/Ti/Si and Pt/Si substrates by sol-gel (spin coating) processing method. Structure-property relation was studied as functions of substrate temperature and sputtering conditions. Special efforts were given in optimizing the deposition parameters to prepare the films in the perovskite phase without post deposition annealing. Dielectric constant and loss tangent of the films were in the range 800-950 and 0.04 -0.06, respectively. Remanent polarization and coercive field were 23.1 w C/cm 2 and 75kV/cm, respectively, for the films without PbTiO 3 seed layer, where as the corresponding quantities for in situ -deposited perovskite Pb(Zr, Ti)O 3 films on PbTiO 3 seed layer were 28 w C/cm 2 and 65 kV/cm, respectively.     

Daily integrated generation scheduling for thermal,pumped‐storage,and cascaded hydro units and purchasing power considering network constraints

We have developed an innovative power generation scheduling method using quadratic programming (QP). The advantage of using our method is that it simultaneously solves unit commitment and economic load dispatch. We relax the binary variables of the unit state into continuous variables to apply QP to this problem. We also add a penalty term to converge the value of those variables to 0 or 1 to the objective function: the sum of the fuel costs and the start‐up costs. This penalty term depends on the per‐unit fuel cost. The possibility of its variable converging to zero increases as the cost increases. This method was applied to a test system of daily generation scheduling that consisted of 29 thermal units, two pumped‐storage units, four cascaded hydro units, and one transmission. The schedule satisfied all constraints, that is, load‐power balance, operation reserve, power flow, minimum up/down‐times, and fuel consumption. This result shows that the proposed method is effective. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 175(1): 25–34, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21014     

A method for testing the interface toughness of ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs)

A simple interface fracture test for ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs) was developed. A variation on the asymmetric double cantilever beam (ADCB) test was proposed so that the interface toughness could be measured in a small specimen of simple shape without applying interlaminar loading to the CMC substrate. The proposed test was applied to an EBC consisting of a mullite layer and Si bond coat on a monolithic SiC substrate. A pre-crack was introduced by pop-in cracking, and then a notch overlapping the pre-crack was machined. The pre-crack was opened by inserting a wedge into the notch. From the critical notch opening displacement the crack starts to propagate, interface toughness is calculated. The measured interface toughness was 4.1?J/m2. Finally, the application range of the test was discussed and suggestions were made for introduction of the notch and pre-crack.     

Tensile Behavior of Cement-Based Composites with Random Discontinuous Steel Fibers

In this paper, the tensile properties of cement-based composites containing random discontinuous steel fibers are reported. Direct tensile tests were performed to study the effects of fiber length (hence fiber aspect ratio), interfacial bonding, and processing conditions on composite properties. Composite tensile strength and ductility are highlighted and discussed.     

Preparation of an Alkali-Element-Doped CeO2-Sm2O3 System and Its Operation Properties as the Electrolyte in Planar Solid Oxide Fuel Cells

The ionic conductivity of the ceria-samaria (CeO₂-Sm₂O₃) system is higher than that of yttria-stabilized zirconia and other CeO₂-based oxides. In this study, a small amount of alkali-element-doped CeO₂-Sm₂O₃ solid solution was prepared. This solid solution was characterized by measuring the powder density and the chemical composition. Moreover, its electrochemical properties were investigated in the temperature range from 700° to 1000°C. It was found that a small amount of alkali-element-doped CeO₂ solid solution enhanced the ionic conductivity. The power density of an oxygen-hydrogen fuel cell for alkali-element-doped CeO₂-Sm₂O₃ ceramics exhibited high values at low temperatures such as 700° to 800°C. It is concluded that the improved fuel cell performance can be attributed to the high stability of this composition in the fuel atmosphere.     

Selective preparation of oligomeric naphthylene ether and its applications to epoxy resin for silicon carbide power semiconductor device materials

In this study, a novel method for selective synthesis of naphthylene ether trimers by self‐condensation of 2,7‐dihydroxynaphthalene in the presence of catalytic amount of potassium hydroxide was reported. An epoxy resin from the trimers was prepared and properties of the cured epoxy resin were examined. The cured resin showed not only good physical thermal stability, such as high glass transition temperature and low thermal expansion coefficient, but also good chemical thermal stability like high thermal decomposition temperature. Additionally, low moisture absorption of the cured resin was confirmed. From these results, the newly prepared epoxy resin with naphthylene ether skeletons was considered to be suitable for advanced applications such as silicon carbide power semiconductor device. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43339.     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.     

Out-of-Plane Negative Magnetoresistance of Bi2Sr1.6La0.4CuO6+δ Single Crystals in the Underdoped Region

In order to investigate a relationship between the carrier concentration and negative magnetoresistance in the underdoped region, we have performed out-of-plane electrical resistivity measurements for underdoped Bi ₂ Sr _1.6 La _0.4 CuO ₆₊ single crystals. Giant negative magnetoresistance has been observed in the most abundant carrier sample with = 0.12 in our experiment. The negative magnetoresistance reduces with decreasing carrier concentration.