Fracture and property relationships in the double diboride ceramic composites by spark plasma sintering of TiB2 and NbB2

Bulk titanium diboride–niobium diboride ceramic composites were consolidated by spark plasma sintering (SPS) at 1950°C. SPS resulted in dense specimens with a density exceeding 98% of the theoretical density and a multimodal grain size ranging from 1 to 10 μm. During the SPS consolidation, the pressure was applied and released at 1950 and 1250°C, respectively. This allowed obtaining a two-phase composite consisting of TiB₂ and NbB₂. For these ceramics composites, we evaluated the flexural strength and fracture toughness and room and elevated temperatures. Room-temperature strength of thus produced bulks was between 300 and 330 MPa, at 1200°C or 1600°C an increase in strength up to 400 MPa was observed. Microstructure after flexure at elevated temperatures revealed the appearance of the needle-shape subgrains of NbB₂, an evidence for ongoing plastic deformation. TiB₂–NbB₂ composites had elastic loading stress curves at 1600°C, and at 1800°C fractured in the plastic manner, and strength was ranged from 300 to 450 MPa. These data were compared with a specimen where a (Ti,Nb)B₂ solid solution was formed during SPS to explain the behavior of TiB₂–NbB₂ ceramic composites at elevated temperatures.     

3-D FEM stress analysis and strength evaluation of single-lap adhesive joints subjected to impact tensile loads

The stress wave propagations and interface stress distributions in the single-lap adhesive joint under impact tensile loads are analyzed using the three-dimensional finite element method (3D-FEM) taking into account the strain rate sensitive of the adhesive using Cowper–Symonds constitutive model. It is found that the rupture of the joint initiates near the middle area of the edges of the interfaces along the width direction. In addition, the effects of Young's modulus of the adherend, the overlap length and the thickness of the adhesive layer, and the initial impact velocity of the impacted mass on the stress wave propagations and the interface stress distributions are examined. The characteristics are compared with those of the joint under static loads, which show the different properties. Furthermore, experiments are also carried out for measuring the strain responses and the joint strength. A fairly good agreement is observed between the numerical and the measured results. The strength of the single-lap adhesive joint, which is described using impact energy, is obtained between 5.439 and 5.620 J for the present joint.     

Activity of oxygen reduction reaction on small amount of amorphous CeOx promoted Pt cathode for fuel cell application

Pt on ceria (CeO_x) particles supported on carbon black (CB) were synthesized using the combined process of hot precipitation and impregnation methods. During 30 cycles of cyclic voltammetry pre-treatment in the potential ranging from −0.2 to 1.3 V (V vs. Ag/AgCl), it was observed that a small amount of CeO_x, which consisted of the interface region between Pt and CeO_x, remained on Pt particles. Other free CeO_x particles were dissolved into H₂SO₄ aqueous solution. To develop the Pt-CeO_x/CB catalyst, the surface chemical states, the net chemical composition, morphology and electrochemical behavior in H₂SO₄ aqueous solution were characterized. Our microanalysis and electrochemical analysis indicate that the active CeO₂ with high specific surface area provides the continuous amorphous cerium oxide (Ce³⁺, Ce⁴⁺) layer with pores on the surface of Pt particles. It is concluded that the amorphous cerium oxide layer on Pt inhibits the oxidation of Pt surface and contributes to enhancement of the activity on Pt cathode. The single cell performance was also improved using the Pt-CeO_x/CB cathode. Based on all data, it is expected that the design based on characterization of the interface between Pt and small amount of amorphous cerium oxide layer could help in preparation of more active Pt catalyst.     

Stability boundaries of gas hydrates helped by methane—structure-H hydrates of methylcyclohexane and cis-1,2-dimethylcyclohexane

The four-phase coexistence curves for the structure-H hydrates of methylcyclohexane and cis-1,2-dimethylcyclohexane in the presence of methane are measured in the temperature range 274.09- and pressure range 1.42-. Very large pressure reductions from the pure methane hydrate are observed by forming structure-H hydrates. The present investigation on the trans-1,2-dimethylcyclohexane system reveals that the limit of the largest-cage occupancy for the structure-H hydrate is laid between the 1,2-dimethylcyclohexane stereo-isomers.     

Hot-Pressed Silicon Nitride with Lu2O3 Additives: Oxidation and Its Effect on Strength

The oxidation behavior and effect of oxidation on room-temperature flexural strength were investigated for hot-pressed Si₃N₄ ceramics, with 3.33 and 12.51 wt% Lu₂O₃ additives, exposed to air at 1400° and 1500°C for up to 200 h. Parabolic oxidation behavior was observed for both compositions. The oxidation products consisted of Lu₂Si₂O₇ and SiO₂. The Lu₂Si₂O₇ grew out of the surface silicate in preferred orientations. The morphology of oxidized surfaces was dependent on the amount of additive; Lu₂Si₂O₇ grains in the 3.33 wt% composition appeared partially in a needlelike type, compared with a more equiaxed type exhibited in the 12.51 wt% case. The high resistance to oxidation shown for both compositions was attributed to the extensive amounts of crystalline, refractory secondary phases formed during the sintering process. Moreover, after 200 h of oxidation at 1400° and 1500°C, the strength retention displayed by the two compositions was 93%–95% and 85%–87%, respectively. The strength decrease was associated with the formation of new defects at the interface between the oxide layer and the Si₃N₄ bulk.     

Preparation of porous poly(D,L‐lactide) and poly(D,L‐lactide‐co‐glycolide) membranes by a phase inversion process and investigation of their morphological changes as cell culture scaffolds

Porous membranes composed of the biodegradable polyesters poly(D,L ‐lactide) (PLA) and poly(D,L ‐lactide‐co‐glycolide) (PLGA) were prepared by a phase inversion process. The molecular weights of the polymers and the concentrations of the polymer solutions affected the pore size and structure of the PLA and PLGA membranes. The molecular weights and morphological changes of the membranes as a function of time were investigated under incubation at 37°C in a humidified 5% CO₂ atmosphere. The pores that formed in the membranes changed dramatically with increasing time under these conditions. From the thermal characterization of the polymers in their dry and wet states, we found that the glass‐transition temperatures of PLA and PLGA affected morphological structure changes in the porous membranes. We also prepared a collagen‐coated membrane to improve the interaction between the cell and the substrate, and we observed that the collagen coating enhanced the attachment and growth of Chinese hamster ovary cells on the substrate. Finally, we found that only PLA was a suitable material to prepare a porous membrane scaffold with the phase inversion process with PLA, and a collagen coating was necessary for cell culture on the membrane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2082–2092, 2004     

Sc2O3 Nanopowders via Hydroxyl Precipitation: Effects of Sulfate Ions on Powder Properties

Hydroxyl-type Sc₂O₃ precursors have been synthesized via precipitation at 80°C with hexamethylenetetramine as the precipitant. The effects of starting salts (scandium nitrate and sulfate) on powder properties are investigated. Characterizations of the powders are achieved by elemental analysis, X-ray diffractometry (XRD), differential thermal analysis/thermogravimetry (DTA/TG), high-resolution scanning electron microscopy (HRSEM), and Brunauer-Emmett-Teller (BET) analysis. Hard-aggregated precursors (γ-ScOOH·0.6H₂O) are formed with scandium nitrate, which convert to Sc₂O₃ at temperatures ≥400°C, yielding nanocrystalline oxides of low surface area. The use of sulfate leads to a loosely agglomerated basic sulfate powder having an approximate composition of Sc(OH)_2.6(SO₄)_0.2·H₂O. The powder transforms to Sc₂O₃ via dehydroxylization and desulfurization at temperatures up to 1000°C. Well-dispersed Sc₂O₃ nanopowders (∼64.3 nm) of high purity have been obtained by calcining the basic sulfate at 1000°C for 4 h. The effects of SO₄²⁻ on powder properties are discussed.     

New Processing Technique for Hydroxyapatite Ceramics by the Hydrothermal Hot-Pressing Method

A new processing technique for preparing hyroxyapatite (HAp) ceramics has been developed using the hydrothermal hot-pressing (HHP) method. Powder mixed dibasic calcium phosphate dihydrate and calcium hydroxide mixed with a Ca/P ratio of 1.67 was treated at 150°C and 40 MPa. The HHP method with the selection of the powder enabled the HAp to be solidified at the low temperature. The resulting HAp ceramics had a tensile strength of approximately 10 MPa. Furthermore, the HAp ceramics possessed a lamellar microstructure and high porosity.     

Surface-active properties of novel cationic surfactants with two alkyl chains and two ammonio groups

A series ofbis-quaternary ammonium salts was easily prepared by the reaction of a long-chaintert-alkylamine with epichlorohydrin, and their surface-active properties were measured. The prepared amphipathic compounds had good water solubility and showed characteristic surface-active properties, particularly, extremely excellent foaming ability and foam stability for some specific compounds, such as the compound with a dodecyl and a tetradecyl group as the lipophilic chains. Their critical micelle concentration, which decreased with increased alkyl chainlength, is two orders of magnitude lower compared with the conventionalmono-quaternary ammonium salts. In comparison with surface-active properties ofbis-quaternary ammonium salts, prepared from various organic dichlorides, there are little differences based on the kind of connecting group in the surface-active properties except for foaming.     

Fabrication of poly(vinyl alcohol)s (PVAs) nanotubes through the fusion of nanocapsules composed of PVAs multilayer films

Poly(vinyl alcohol) (PVA) nanocapsules were fabricated by the deposition of PVA multilayer films onto the surface of silica particles followed by the removal of the silica cores. When a water dispersion of PVA nanocapsules was dried on a substrate, PVA nanotubes were formed through the one-dimensional fusion of the nanocapsules. This fusion behavior of the PVA nanocapsules was strongly affected by the molecular weights and acetylation degrees of PVA, the capsule film thickness of the PVA nanocapsules and the temperature to dry a water dispersion of the nanocapsules. When nanocapsules composed of 20 layered films of acetylated PVA with a 14% acetylation degree were used, nanotube formation via the fusion of these nanocapsules occurred effectively upon drying the water dispersion at 20 °C.