Precise analysis of H, C, N, and O as dominant impurities in Cu films: complementary use of SIMS and GDMS

Secondary ion mass spectrometry (SIMS) and glow discharge mass spectrometry (GDMS) were used to determine the impurity concentrations of hydrogen, carbon, nitrogen, and oxygen elements in Cu films, and the results of SIMS and GDMS were carefully interpreted. The Cu films were deposited on Si (100) substrates at substrate bias voltages ranging from 0 V to −150 V using a non-mass separated ion beam deposition method. From the results of SIMS using a Cs⁻ ion beam, as a whole, many high intensity peaks were observed in the Cu films deposited without substrate bias voltage. From the quantitative GDMS results, these peaks were determined to be signals detected as a cluster state such as C_xH_x, O_xH_x, C_xO_xH_x. Therefore, using a combination of these dominant impurities, all the unknown peaks observed in the SIMS results could be interpreted. Moreover, it was found that the dominant impurities having a great influence on the film purity were hydrogen, carbon, nitrogen, and oxygen.     

Vocal mechanics as the basis for phonosurgery

OBJECTIVE: A number of modifications in laryngoplastic phonosurgery have recently been proposed. This report is intended to clarify the concept on which the surgery should be based, vocal mechanics, for further rational development of the surgery. STUDY DESIGN: The results of various previous surgeries were compared. In an attempt to elucidate what makes the difference in the results, simulation of voice production was conducted with the use of excised larynges. METHODS: Excised larynges were mounted on a tube so as to be blown from below. Experimental variables in the model included the glottal area initially set, stiffness of the vocal folds, and subglottal pressure. The conditions under which the voice became hoarse were examined. RESULTS: The voice became hoarse under the following major conditions: 1) the initial glottal area exceeded a certain value, 2) stiffness was too high, and 3) the glottis was too tightly closed. Clinical representation for each condition was made, particularly for excessively tight glottal closure such as in spasmodic dysphonia. A new type of surgical treatment for spasmodic dysphonia, lateralization thyroplasty, was briefly reported, which restored the voice to normal without recurrence for 1 year at the time of this writing. CONCLUSIONS: A potential new type of laryngoplastic phonosurgery should be conformed to the mechanics of voice production. In treating dysphonia, it is often necessary to switch from etiologic or radical treatment, if infertile, to symptomatic treatment instead, at the level of mechanics.     

Influence of γ Irradiation on the Mechanical Strength and In Vitro Biodegradation of Porous Hydroxyapatite/Collagen Composite

Gamma irradiation treatment (GIT) is the most widely used sterilization method for biomaterials in spite of the potential to degrade polymers. The adverse effects of GIT on the mechanical properties and biological stabilities of porous hydroxyapatite/collagen (HAp/Col) composites were investigated in this study. Those properties of a porous HAp/Col composite stabilized by dehydrothermal treatment (DHT) drastically decreased by GIT in the same manner as conventional pure Col materials. DHT after GIT could partially eliminate the adverse effects, due to the introduction of cross-linkage among the degraded Col molecules.     

New cleavable surfactants derived from glucono-1,5-lactone

New amido nonionic cleavable surfactants were synthesized in good yields by the acetalization of glucono-1,5-lactone with octanal, 2-octanone or 2-undecanone, followed by amidation with monoethanolamine, diethanolamine or morpholine. These compounds possessed good water solubilities. The compounds derived from 2-octanone showed higher critical micelle concentrations than the compounds from octanal. For the same hydrophobic chain, both the micelle-forming property and the ability to lower surface tension increased with the change in the terminal amide group in the order diethanolamide<morpholide<monoethanolamide. Interestingly, in spite of their relatively short hydrophobic chains, these compounds showed greater ability to lower surface tension than conventional nonionic surfactants, such as alcohol ethoxylates. Furthermore, their acid-decomposition properties were determined. Their decomposition rates were also compared with that of the corresponding carboxylate type of compound derived from glucono-1,5-lactone.     

Gas phase oxidation of benzene to phenol using Pd-Cu composite catalysts. Effect of temperature,feeding gas and catalyst composition

Catalytic oxidation of benzene in the gas phase has been studied as a function of the catalyst composition, reaction temperature and the feed conditions of reactant gases, hydrogen, oxygen, benzene as well as diluting inert gas. The catalyst tested is composed of Pd and Cu(I) ions, both of which are supported on silica gel. If one of the two metal species is lacked from the catalyst, no catalytic activity appears. The product is almost exclusively phenol and some accompanying benzoquinone, in particular at lower temperatures, as minor byproduct.On leave from Hua-Dong Institute of Technology, Nanjing, People's Republic of China.     

In situ FTIR spectra at the Cu electrode/propylene carbonate solution interface

In situ Fourier transform infrared spectroscopy (FTIR) spectra measurements were obtained for a Cu electrode/solution of lithium perchlorate in propylene carbonate (PC). The dependence of potential on the concentration of PC in the vicinity of the electrode was investigated. The bands due to free PC and PC solvated to lithium ions in the solution were distinguished by the single reflection attenuated total reflection (ATR) spectra. In the FTIR spectra, the reversible change in the concentration of free PC and solvated PC in the diffuse double layer was observed to be accompanied by a change in potential. As the potential decreased, the free PC concentration increased, while the concentration of the PC solvated to lithium ions decreased. Thus, it can be concluded that the equilibrium shifts from Li⁺(PC)₄ to Li⁺(PC)₃ + PC as the potential decreases. Furthermore, Li⁺(PC)₃ orientates itself so that it is parallel to the electrode surface.     

Monolithic integration of InGaAsP/InP distributed feedback laser and electroabsorption modulator by vapor phase epitaxy

Monolithic integration of a 1.55-μm InGaAsP/InP distributed feedback (DFB) laser and an electroabsorption (EA) modulator was studied. The difference between the lasing photon energy and the bandgap energy of the modulator waveguide was designed to be 30-40 meV, taking into account the linewidth-enhancement factor and the zero-bias absorption loss. The integrated devices were grown by three-step vapor phase epitaxy (VPE). The CW threshold current at 20°C of the DFB laser part with a buried heterostructure was 30-60 mA and the breakdown voltage of the modulator part with a strip-loaded stripe geometry was 20-40 V, and these values indicated satisfactory crystal quality in the VPE epitaxial layers. The operating voltage of the modulator to give on:off ratios of 10:1 and 100:1 was 1.5- 4 V and 2.5-6.5 V, respectively, depending on the length in the range200-500 mum. A 3-dB bandwidth of about 2.5 GHz and a linewidth-enhancement factor of about 1.6 were obtained for the integrated modulator.     

The complex aerodynamic footprint of desert locusts revealed by large-volume tomographic particle image velocimetry

Particle image velocimetry has been the preferred experimental technique with which to study the aerodynamics of animal flight for over a decade. In that time, hardware has become more accessible and the software has progressed from the acquisition of planes through the flow field to the reconstruction of small volumetric measurements. Until now, it has not been possible to capture large volumes that incorporate the full wavelength of the aerodynamic track left behind during a complete wingbeat cycle. Here, we use a unique apparatus to acquire the first instantaneous wake volume of a flying animal''s entire wingbeat. We confirm the presence of wake deformation behind desert locusts and quantify the effect of that deformation on estimates of aerodynamic force and the efficiency of lift generation. We present previously undescribed vortex wake phenomena, including entrainment around the wing-tip vortices of a set of secondary vortices borne of Kelvin–Helmholtz instability in the shear layer behind the flapping wings.