Proposal of limit moment equation applicable to planar/non-planar flaw in wall thinned pipes under bending

In this paper, a limit bending moment equation applicable to all types of planar and non-planar flaws in wall-thinned straight pipes under bending was proposed. A system to rationally classify the planar/non-planar flaws in wall-thinned pipes was suggested based on experimental observations focused on the fracture mode. The results demonstrate the importance of distinguishing between axial and circumferential long flaws in wall-thinned pipes.     

Microstructure and Thermoelectric Properties of Dense YB<Subscript>22</Subscript>C<Subscript>2</Subscript>N Samples Fabricated Through Spark Plasma Sintering

Dense samples of the higher boride YB₂₂C₂N have been fabricated through the spark plasma sintering (SPS) method with different sintering aids. YB₂₂C₂N is a representative of a series of newly discovered rare-earth borocarbonitrides, which may be the long-awaited n-type counterpart of boron carbide, “B₄C.” The effect of Si, SiC, Al, and TiC additions on the sintering process of YB₂₂C₂N has been studied. The best sintered bodies with densities higher than 90% of theoretical density were obtained by means of SPS at 1700°C. We show that the additive choice and pressure have an effect on grain size and density. An investigation of the effect of atmosphere on the sintering behavior has also been carried out. It was found that sinterability is enhanced under nitrogen atmosphere. Thermoelectric properties of the materials sintered with additives have been evaluated, and we discuss their dependences on the fabrication process route.     

ALP住宅

精选理由日本住宅在设计上讲究"小、巧、精致、舒适"的实用主义,特别是在集合住宅中,更会将精致与实用相结合。本案例中,建筑师以折叠的立面挑战传统建筑中方盒子形状的体量,用对角线替代绝对水平及绝对垂直线条,操弄开放与闭合之间的关系,营造实用生活空间的同时不忘精致效果。     

Proposal and development of radial air‐gap coreless generator suitable for small wind turbine used in urban area

Independent distributed power generation using small wind turbines is becoming more widespread as wind power generation increases. Installation of small wind turbines in densely populated urban areas is not only useful from the viewpoint of extracting wind power sources in weak‐wind areas but also for making renewable energy easier to access when power supplies are closer to consumers. It is from this point of view that the authors proposed “urban wind power generation” using a collective system with a number of small vertical wind turbines, and have developed a suitable generator for low‐speed vertical wind turbines such as a Savonius windmill. Based on a standard coreless generator, the proposed generator is designed to make the direction of the magnetic flux radial in order to install the magnets and coils on the outer end of the generator. The change of magnet composition and flux direction maximizes the speed of the flux change and output voltage within a limited space. With the above configuration, the power of the proposed generator is independent of the diameter. In this report, the authors describe and evaluate the fundamental performance of a prototype of the proposed generator. Based on the experiments, a maximum output power of 283 W was obtained. The obtained starting torque is small enough to begin rotation under weak wind conditions of no more than 1 m/s. Therefore, it is clear that the proposed “radial” coreless generator is suitable for self‐starting and producing high power at low wind speed. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 26– 34, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20695     

Extending image processing strain measurement system to evaluate fracture behavior of wall-thinned pipes

In this paper, an image processing strain measurement system was extended so that fracture behavior of wall-thinned pipes, such as out of plane and large plastic deformation observed in bulging, can be evaluated by the system. Regular grids with nominal size of 10 mm × 10 mm were marked on 100A carbon steel pipes and the images taken with 6 CCD cameras of 15 million pixels were correlated to achieve resolution of 0.3% strain. Strain of the cylinder's outer surface was evaluated by (1) modeling the grids as a cylindrical shell, (2) measuring deformation of the grid on a projected plane, and (3) applying an updated Lagrangian method. The validity of the system was confirmed by applying the proposed system to the burst tests of a wall-thinned cylinder. In addition, the system measured the non-uniform strain distribution that explained the unexpected cracking location.     

Structure and formation of ant transportation networks

Many biological systems use extensive networks for the transport of resources and information. Ants are no exception. How do biological systems achieve efficient transportation networks in the absence of centralized control and without global knowledge of the environment? Here, we address this question by studying the formation and properties of inter-nest transportation networks in the Argentine ant (Linepithema humile). We find that the formation of inter-nest networks depends on the number of ants involved in the construction process. When the number of ants is sufficient and networks do form, they tend to have short total length but a low level of robustness. These networks are topologically similar to either minimum spanning trees or Steiner networks. The process of network formation involves an initial construction of multiple links followed by a pruning process that reduces the number of trails. Our study thus illuminates the conditions under and the process by which minimal biological transport networks can be constructed.     

Competitive adsorption of fibronectin and albumin on hydroxyapatite nanocrystals

Competitive adsorption of two-component solutions containing fibronectin (Fn) and albumin (Ab) on hydroxyapatite (HAp) nanocrystals was analyzed in situ using the quartz crystal microbalance with dissipation (QCM-D) technique. Adsorption of the one-component protein (Fn or Ab) and the two-component proteins adjusted to different molar ratios of Fn to Ab at a fixed Fn concentration was investigated. The frequency shift (Δf; Hz) and the dissipation energy shift (ΔD) were measured with the QCM-D technique, and the viscoelastic changes of adlayers were evaluated by the saturated ΔD/Δf value and the Voigt-based viscoelastic model. For the adsorption of the one-component protein, the Fn adlayer showed a larger mass and higher viscoelasticity than the Ab adlayer, indicating the higher affinity of Fn on HAp. For the adsorption of the two-component proteins, the viscoelastic properties of the adlayers became elastic with increase in Ab concentration, whereas the adsorption mass was similar to that of Fn in the one-component solution regardless of the Ab concentration. The specific binding mass of the Ab antibody to the adlayers increased with increase in Ab concentration, whereas that of the Fn antibody decreased. Therefore, Fn preferentially adsorbs on HAp and Ab subsequently interacts with the adlayers, indicating that the interfacial viscoelasticity of the adlayers was dominated by the interaction between Fn and Ab.     

Tofu: A 6D Mesh/Torus Interconnect for Exascale Computers

A new architecture with a six-dimensional mesh/torus topology achieves highly scalable and fault-tolerant interconnection networks for large-scale supercomputers that can exceed 10 petaflops.     

Power system control method using customers' energy storage systems and the verification of proposed method

Advanced energy storage systems have been widely applied to industries and are being installed at large buildings and factories to realize efficient energy usage. This paper presents a control method involving load frequency control and distribution network control (loss reduction control) using a part of customers' owned battery capacity. When 10% of total battery capacity of 100 MW in a network of 30‐GW generator capacities is used for load frequency control, a total of 1500‐MW generation units for load frequency control, at maximum, can be stopped without deterioration of power quality. In addition, when batteries are used for loss reduction in a distribution network, 2% of the loss on a summer day can be reduced. To realize both effects to their fullest, a novel integrated control algorithm is proposed and its economic effect is evaluated by numerical simulations. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 11–20, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20704     

The role of the msh homeobox gene during Drosophila neurogenesis: implication for the dorsoventral specification of the neuroectoderm

Development of the Drosophila central nervous system begins with the delamination of neural and glial precursors, called neuroblasts, from the neuroectoderm. An early and important step in the generation of neural diversity is the specification of individual neuroblasts according to their position. In this study, we describe the genetic analysis of the msh gene which is likely to play a role in this process. The msh/Msx genes are one of the most highly conserved families of homeobox genes. During vertebrate spinal cord development, Msx genes (Msx1-3) are regionally expressed in the dorsal portion of the developing neuroectoderm. Similarly in Drosophila, msh is expressed in two longitudinal bands that correspond to the dorsal half of the neuroectoderm, and subsequently in many dorsal neuroblasts and their progeny. We showed that Drosophila msh loss-of-function mutations led to cell fate alterations of neuroblasts formed in the dorsal aspect of the neuroectoderm, including a possible dorsal-to-ventral fate switch. Conversely, ectopic expression of msh in the entire neuroectoderm severely disrupted the proper development of the midline and ventral neuroblasts. The results provide the first in vivo evidence for the role of the msh/Msx genes in neural development, and support the notion that they may perform phylogenetically conserved functions in the dorsoventral patterning of the neuroectoderm.