Molecular recognition by wall-assembling-type nanocavity in aqueous media

Steroid cyclophanes, each having a macrocyclic ring attached to four bile acid moieties via chiral lysine connectors, were synthesized, and the binding of the 2-naphthylphenylketone (guest) to the steroid cyclophanes in water was investigated. The circular dichroism spectra of the steroid cyclophane with cholic acid and L-lysine were significantly affected by the binding of the guest, and the induced circular dichroism based on the absorption of the achiral guest was also observed. The binding of the guest to the steroid cyclophane with cholic acids and D-lysines induced changes in the circular dichroism spectra with the opposite sign of the molecular ellipticities. An induced circular dichroism spectral change was not observed upon binding of the guest to the analogous host without OH sites. These results strongly suggest that the guest is conformationally fixed through hydrogen bonding between the carbonyl group of the guest and the steroidal hydroxyl group of the host. The assembly of only four steroid residues on the macrocyclic ring probably provided a hydrophobic nanocavity for hydrogen bonding.     

Disturbance-free high-speed sinusoidal phase-modulating laser diode interferometer

A surface profiler that incorporates a feedback controller to eliminate external disturbances is proposed and demonstrated. Its overall performance is dependent on the frequency response of the feedback loop. The frequency of the modulating signal strongly influences the response of the feedback controller. When we used the integrating-bucket method, the CCD camera had to be operated at a low-frequency video rate. Our technique uses a CCD camera equipped with an electronic shutter. The shutter function enables us to apply high-speed sinusoidal phase modulation to the conventional integrating-bucket method under the standard video rate.     

Synchronized fresh cell bioreactor system for continuous L-(+)-lactic acid production using Lactococcus lactis IO-1 in hydrolysed sago starch

An efficient bioreactor, termed a 'synchronized fresh cell bioreactor', was developed and consisted of a pH-dependent substrate feed system coupled with cross flow filtration and turbidity control. The effect of high dilution rate and high cell density coupled with high cell viability on the production of l-lactic acid in continuous culture by Lactococcus lactis IO-1 in enzyme-hydrolysed sago starch medium was investigated. For all changes in dilution rate, cells responded in a synchronized way to the addition of glucose by increasing the rate of biomass formation. Consequently, a glucose-free feed solution was required to maintain the cell concentration at a particular pre-set value. This set-up facilitated the maintenance of the cells in a permanent log phase. At a cell concentration of 15 gl(-1) and a feed glucose concentration of 53 gl(-1), volumetric LA productivities of 8.2, 19.3 and 33.1 gl(-1)h(-1) were obtained at dilution rates of 0.21, 0.50 and 1.1 h(-1), respectively. The respective residual glucose concentrations in the spent medium were 1.90, 0.24 and 3.80 gl(-1). By increasing the cell density, the volumetric productivity increased proportionally. At high cell density, higher dilution rates resulted in lower lactate concentrations in the culture medium resulting in higher productivity. This reactor facilitated efficient operation with high cell viability by maintaining the cells in continuous growth phase for long-term fermentation. Therefore, the growth rate (mu) was calculated according to the Monod equation. Using this system, high specific productivities can be obtained which guarantees high commercial productivity at economical cost with only a small investment for setting up the sago industry.     

Antimicrobial activity of macrolides against clinical isolates

Antimicrobial activity of 6 macrolides was determined using a micro-broth dilution method, against 535 clinical isolates of 22 species, which were isolated in 1996 from 325 facilities in Japan. Results were as follows. 1. In general, antimicrobial activities of 14-membered macrolides were higher than those of 16-membered macrolides. The antimicrobial activities of 14-membered macrolides were in the order of clarithromycin (CAM), erythromycin (EM), roxithromycin (RXM). Among 16-membered macrolides, rokitamycin (RKM) was the most potent, josamycin (JM) was next potent followed by midecamycin (MDM). More numbers of highly-resistant strain of > 100 micrograms/ml were recognized in 14-membered macrolides than in 16-membered macrorides. 2. Most of S. pyogenes (group A) strains were distributed in the susceptible range and almost none was found in the resistant range. 3. S. pneumoniae strains were distributed widely from the susceptible range to the highly resistant range, and as high as 37.1% fell into the high resistance of > 100 micrograms/ml range. 4. Against Peptostreptococcus spp. and MRSA, 16-membered macrolides were more effective than 14-membered macrorlides, and their antibacterial activities were in the order of RKM, JM, MDM. Ratio of high-resistant strains of > 100 micrograms/ml against 14-membered macrolides was much higher than that against 16-membered macrolies. 5. Most of M. (B.) catarrhalis strains were distributed in the susceptible range of < or = 1.56 micrograms/ml, and most of H. influenzae strains were distributed within the moderately resistant and the resistant ranges. 6. In M. (B.) catarrhalis and H. influenzae, no correlation between macrolide resistance and beta-lactamase production was recognized. 7. Most of C. jejuni strains were susceptible to all macrolides used in this study.     

Signal distortion and noise in AM-SCM transmission systemsemploying the feedforward linearized MQW-EA external modulator

In subcarrier multiplexing (SCM) optical video distribution systems, the nonlinear signal distortion generated by the combined action of laser chirp and fiber dispersion limits the transmission distance. This paper for the first time shows that low-chirp MQW (multiquantum well)-EA (electroabsorption) external modulators are applicable to AM-SCM transmission systems. The feedforward linearization technique is used to compensate the signal distortion due to the nonlinearity in the modulator's L-V (light power versus voltage) characteristic. The effectiveness of this type of modulator for suppressing dispersion-induced distortion is clarified experimentally. A feedforward linearized transmitter with composite second order (CSO) intermodulation distortion <-62 dBc, composite triple beat (CTB) intermodulation distortion <-59 dBc and a carrier-to-noise ratio (CNR) >50.5 dB is successfully constructed. It is shown that the transmitter can achieve a CSO <-59 dBc, a CTB <-57 dBc and a CNR >49.5 dB for a 32 channel AM signal and 10 km transmission. Furthermore, estimations of the signal distortion cancellation and the noise characteristic achieved with feedforward circuit modeling are shown. The results obtained here emphasize that MQW-EA external modulators are applicable to AM-SCM transmission systems     

New modifications of poly(vinyl alcohol)s and their applications

Poly(vinyl alcohol) (PV-OH), prepared from poly(viny) acetate), is used widely in many industries. Various grades have been produced, with different degree of polymerization and degree of hydrolysis. Recently, novel modified (PV-OH)s with anion, cation, silanol or hydrophobic groups have been studied and developed. They have new properties in addition to those of ordinary PV-OH and have new applications. The methods of modification and the characteristics and some applications of the modified polymers are described.     

Speckle reduction in coherent information processing

Speckle reduction techniques have been developed as one of the most active research fields in coherent optical information processing, together with the investigations of speckle statistics and coherence theory. The principles of speckle reduction are classified to five categories: 1) control of spatial coherence, 2) control of temporal coherence, 3) spatial sampling, 4) spatial averaging, and 5) digital image processing. This paper surveys the research works in the field of speckle reduction techniques involving four categories 1)-4) which have been conducted in the past 30 years     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

Modulation of the sensitive temperature range of fluorescent molecular thermometers based on thermoresponsive polymers

Fluorescent molecular thermometers based on polymers showing a temperature-induced phase transition and labeled with polarity-sensitive fluorescent benzofurazans are the most sensitive known. Here we show a simple and effective method for modulating the sensitive temperature ranges of fluorescent molecular thermometers based on such temperature-responsive polymers. 4-N-(2-acryloyloxyethyl)-N-methylamino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole was adopted as a polarity-sensitive fluorescent benzofurazan, and nine copolymers of two kinds of acrylamide derivative (N-n-propylacrylamide, N-isopropylacrylamide, and/or N-isopropylmethacrylamide) with a small amount of DBD-AE were obtained. The fluorescence intensities of these copolymers in aqueous solution sharply increased with increasing temperature over a small range (6-7 degrees C). In contrast, these fluorescent molecular thermometers differed from one another in the sensitive temperature range (between 20 and 49 degrees C). Moreover, the sensitive temperature ranges were well related to the acrylamide ratios in feed. In addition, the responses from these fluorescent molecular thermometers to the change in temperature were reversible and exactly repeatable during 10 cycles of heating and cooling (relative standard deviation of the fluorescence intensity, 0.44-1.0%).     

Elasto-plastic analysis of orthogonally stiffened plates with initial imperfections under uniaxial compression

In general, the stiffened plates consisting of steel plate elements are unavoidably accompanied by initial imperfections such as residual stresses and initial deflections, which have considerable effects on their ultimate strength. Therefore, it is needed for designing them to develop more rational method taking the ultimate strength influenced by initial imperfections into account rather than the conventional design method being on the basis of the linear elastic buckling theory.From this point of view, this study aims to evaluate rigorously the ultimate strength of orthogonally stiffened plate with initial imperfections under uniaxial in-plane compression. The elasto-plastic finite element method is applied to attain this purpose. By a happy combination of modal analytical technique and conventional finite element method, much reduction of the degree of freedom can be expected to be realized herewith. Some numerical calculations are performed by means of this rigorous method to examine the exactness of the analysis. Moreover, the numerical results are compared with the experimental ones.