Radiation heat transfer in three‐dimensional closed space including diffuse and specular surfaces

A method of numerical calculation for radiation heat transfer in a three‐dimensional closed space including diffuse and specular surfaces was developed. To enable an analysis of the radiation heat exchange on each surface considering multiple specular reflections and obstacles to radiation in the space, an improved heat ray‐tracing method was presented to calculate view factors accurately. The method was determined to be applicable to complicated problems in test calculations using models with specular surfaces and obstacles. Continuing efforts are being applied to more realistic problems. The example examined in this paper is an infrared emitter with a parabolic specular reflector, which is a conventional electric heating apparatus. The measured result for radiant power distribution agrees well with the calculated one. The practical validity of our method was verified. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(2): 108–129, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10074     

Preparation of Cu(In,Ga)(S,Se)2 thin films by sequential evaporation and annealing in sulfur atmosphere

Cu(In,Ga)(S,Se)₂ thin films with high Ga/III ratio (around 0.8) were prepared by sequential evaporation from CuGaSe₂, CuInSe₂, In₂Se₃ and Ga₂Se₃ compounds and then annealing in H₂S gas atmosphere. The annealing temperature was varied from 400 to 500 °C. These samples were characterized by means of XRF, EPMA, XRD and SEM. The S/(S+Se) mole ratio in the thin films increased with increase in the annealing temperature, keeping the Cu, In and Ga contents nearly constant. The open circuit voltage increased and the short circuit current density decreased with increase in the annealing temperature. The best solar cell using Cu(In,Ga)(S,Se)₂ thin film with Ga/(In+Ga)=0.79 and S/(S+Se)=0.11 annealed at 400 °C demonstrated V_oc=535 mV, I_sc=13.3 mA/cm², FF=0.61 and efficiency=4.34% without AR-coating.     

Thin films of Cu(In,Ga)Se2 and ordered vacancy compound prepared by thermal crystallization and their photovoltaic applications

Thin films of Cu–In–Ga–Se alloy system with various composition were prepared by thermal crystallization from In/CuInGaSe/In precursor. Electron probe microanalysis and X-ray diffraction study revealed that these samples were assigned to chalcopyrite Cu(In,Ga)Se₂ or ordered vacancy compound Cu(In,Ga)₂Se_3.5. Solar cell with ZnO:Al/i–ZnO/CdS/Cu(In,Ga)Se₂/Mo/soda-lime glass substrate structure was fabricated by using thermal crystallization technique, and demonstrated a 9.58% efficiency without AR-coating.     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.     

Enhancement of methane production by Methanosarcina barkeri using Fe3O4 nanoparticles as iron sustained release agent

Anaerobic digestion has attracted attention because it does not require power for aeration, it reduces excess sludge and it generates methane gas. However, the growth rate of anaerobic microorganisms is slow, resulting in low treatment efficiency. In this study, the impact of Fe₃O₄ nanoparticles (NPs) on the growth of methanogens, which is the rate-determining step in anaerobic digestion, was investigated using a pure culture of Methanosarcina barkeri as the model methanogen. M. barkeri were cultivated in iron free medium, as well as in media amended with various concentrations of Fe₃O₄ NPs with a mean diameter of 8.1?±?2.4?nm. The production of methane gas was greatly increased when organisms were cultured in media containing NPs. After the methane production was saturated, methanol was newly added to the culture, which resulted in additional methane generation at a higher production rate than occurred during the initial round of cultivation in media containing 20?ppm Fe₃O₄ NPs. In addition, no evidence of negative impacts of Fe₃O₄ NPs on the growth of M. barkeri was observed. Taken together, these results strongly suggest that adding Fe₃O₄ NPs into the fermenter as an agent of sustained iron release can enable sustainable methane fermentation.     

Preferable structure of poly(ethylene glycol) for grafting onto a cellulosic membrane to increase hemocompatibility without reduction in solute permeability of the membrane

Swelling layers formed by poly(ethylene glycol) (PEG) chains grafted onto surfaces of a cellulosic membrane are known to improve hemocompatibility of the membrane. Three types of hemodialysis membranes were derived from the same regenerated-cellulose hollow-fiber membrane by grafting PEG with different formulas onto the surfaces to clarify the influence of the grafted PEG chains on solute permeability of the membranes. Determination of volume fractions of nonfreezing water contained in the membranes by differential scanning calorimetry revealed that most of the PEG chains were grafted onto the external surfaces and less into the pores in the membranes. Permeability of vitamin B₁₂ for the PEG-grafted membranes except for the one with the shortest PEG chains was reduced as compared with the original membrane, while that of tritium-labeled water for all the PEG-grafted membranes was the same as that of the original membrane. Structural parameters only of the PEG-grafted membrane with the largest alkyl groups at the terminal of the PEG chains were different from those of the other PEG-grafted and original membranes. The shorter PEG chains with the larger terminal alkyl groups are suitable for grafting onto a cellulosic membrane to increase hemocompatibility of the membrane without significant reduction in the solute permeability of the membrane. © 1995 John Wiley & Sons, Inc.     

The electrical properties of polymer nanocomposites with carbon nanotube fillers

The electrical properties of polymer nanocomposites containing a small amount of carbon nanotube (CNT) are remarkably superior to those of conventional electronic composites. Based on three-dimensional (3D) statistical percolation and 3D resistor network modeling, the electrical properties of CNT nanocomposites, at and after percolation, were successfully predicted in this work. The numerical analysis was also extended to investigate the effects of the aspect ratio, the electrical conductivity, the aggregation and the shape of CNTs on the electrical properties of the nanocomposites. A simple empirical model was also established based on present numerical simulations to predict the electrical conductivity in several electronic composites with various fillers. This investigation further highlighted the importance of theoretical and numerical analyses in the exploration of basic physical phenomena, such as percolation and conductivity in novel nanocomposites.     

Maskless Lateral Epitaxial Growth of Gallium Nitride Using Dimethylhydrazine as a Nitrogen Precursor

Lateral epitaxial growth (LEG) is a key technology to improve the lifetime of III-V nitride-based laser diodes (LDs) by reducing the dislocation density in the materials. To increase the area of low dislocation density, the lateral growth rate needs to be increased. In addition, suppression of the vertical growth is strongly desired to avoid unnecessarily thick growth, which would result in cracks in the epitaxial film. This paper reports the maskless LEG of GaN with extremely high lateral-to-vertical growth rate ratio using dimethylhydrazine as a nitrogen precursor. The lateral growth only occurs from the sidewalls of the etched mesa stripes without any dielectric masks. The lateral growth rate toward the direction is extremely high, as high as 10 μm/h, while no vertical growth is observed on the top of unmasked mesa. The cross-sectional transmission electron microscopic image shows that the threading dislocations in the wing region extend only toward the lateral direction. Note that almost smooth coalescence between the wing regions is confirmed by atomic force microscopy. X-ray diffraction measurements reveal that this maskless LEG drastically improves the crystallographic twist down to 97 arc-s, which is as comparably low as that of a free-standing GaN substrate. The presented maskless LEG is advantageous for optical device applications.     

Novel microporous carbon material with flower like structure templated by MCM-22

Novel flower like microporous carbons with very high surface area have been synthesized for the first time using MCM-22 zeolite as a template and sucrose as a carbon source. The textural parameters of the materials can easily be tuned by the simple adjustment of the sucrose to MCM-22 weight ratio. It has been also found that the specific surface area of the microporous carbon materials is much higher as compared with that of its parent zeolite template.     

氘团簇离子（d^＋3）与固体相互作用过程中的团簇行为研究

讨论了由三个氘原子组成的氘团簇离子束与独立氘离子束在轰击固体靶时,在原子过程呼Ｄ－Ｄ核聚变过程中体现出的差别。对氘团簇与固体靶相互作用的机理进行了分析。