Transient analysis of the release and reduction of NOx using a Pt/Ba/Al2O3 catalyst

The release and reduction of NO_x in a NO_x storage-reduction (NSR) catalyst were studied with a transient reaction analysis in the millisecond range, which was made possible by the combination of pulsed injection of gases and time resolved time-of-flight mass spectrometry. After an O₂ pulse and a subsequent NO pulse were injected into a pellet of the Pt/Ba/Al₂O₃ catalyst, the time profiles of several gas products, NO, N₂, NH₃ and H₂O, were obtained as a result of the release and reduction of NO_x caused by H₂ injection. Comparing the time profiles in another analysis, which were obtained using a model catalyst consisting of a flat 5 nmPt/Ba(NO₃)₂/cordierite plate, the release and reduction of NO_x on Pt/Ba/Al₂O₃ catalyst that stored NO_x took the following two steps; in the first step NO molecules were released from Ba and in the second step the released NO was reduced into N₂ by H₂ pulse injection. When this H₂ pulse was injected in a large amount, NO was reduced to NH₃ instead of N₂.

A only small amount of H₂O was detected because of the strong affinity for alumina support. We can analyze the NO_x regeneration process to separate two steps of the NO_x release and reduction by a detailed analysis of the time profiles using a two-step reaction model. From the result of the analysis, it is found that the rate constant for NO_x release increased as temperature increase.     

Relationships between hydrogen donor abilities and chemical structure of aromatic compounds in terms of coal liquefaction

To obtain fundamental information about hydrogen transfer, the relationships between hydrogen donor ability and chemical structure of model compounds representing donor solvents is studied using gas chromatography,¹H n.m.r. and computing calculation methods. The order of the model compounds in terms of the ability as donor solvent to release hydrogen is: decalin < tetralin < 1,2-dihydronaphthalene < < 1,4-dihydronaphthalene. This trend closely correlates with the difference in binding energies of the hydroaromatic compounds and their radicals, determined by intermediate neglect of differential overlap (INDO) calculation. Electron spin resonance spectroscopy (e.s.r.) confirms that radical species are created after heat-treatment of the donor compounds. The ability of model compounds representing coal to accept hydrogen is assessed from a comparison of the¹H n.m.r. spectra. It is established that donor and acceptor efficacies are dependent upon chemical structure.     

Elastoplastic Finite Element Analysis and Strength Evaluation of Adhesive Butt Joints of Similar and Dissimilar Hollow Shafts Subjected to External Bending Moments

Stress distributions and deformation of adhesive butt joints are analyzed by an elastoplastic finite element method when the joints of similar and dissimilar shafts are subjected to external bending moments. The effects of the ratio of Young's modulus for the adherends to that for an adhesive and the effects of the adhesive thickness on the interface stress distribution are investigated. Joint strength is predicted by using the elastoplastic interface stress distributions. It is found that the singular stress at the edge of the interfaces increases with an increase of the ratio of Young's modulus. Measurement of strains in joints and experiments on joint strength were conducted. The numerical results are in fairly good agreement with the experimental results. It is observed that the joint strength for dissimilar shafts are smaller than those for similar shafts. A fracture of dissimilar adhesive up-bonded shafts occurred from the interface of the adherend with smaller Young's modulus. It is seen that joint strength increases as the adhesive thickness increases.     

Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models

The variation of surface residual stress within a machined surface layer caused by face turning was studied. The size of the tool’s corner radius and the feed rate affect residual stress. A process model using the finite element method is proposed and the mechanical effects of the corner radius and feed rate on a machined surface were discussed. When a tool with a small corner radius is used, surface residual stress perpendicular to the cutting direction becomes compression stress. As well, surface residual stress changes from tension to compression as the feed rate decreases. The process model consists of an orthogonal cutting simulation and an indentation-like simulation of a corner radius into a work piece surface. The simulated results show quantitative agreement with the residual stress measured experimentally. The integrity of the machined surface will be controlled more efficiently if the cutting conditions during finishing are determined with the proper consideration of the surface generating process.     

Novel process for cover glass with ideal stress distribution

Abstract — This paper proposes a new process to manufacture cover glass that overcomes a strength trade‐off between the face and the edge. In the process, alkali barrier films are deposited on glass faces before an ion exchange process in order to control face stress properties without inhibiting the edge strengthening. As a demonstration of the process, alkali‐alumino‐silicate glass sheets with sputter‐deposited SiO₂ films were chemically strengthened, and then their stress properties and strengths were investigated. As a result, thicker SiO₂ films cause lower face DOL (depth of strengthened layer), and it is observed that the faces have lower DOL than the edges. In strength tests corresponding to major fracture modes of smartphone cover glass, specimens with 80–100 nm films have more balanced face performance and better edge impact strengths than the no‐film specimen.     

Thermodynamics of calcium and oxygen in molten titanium and titanium-aluminum alloy

The deoxidation equilibrium of molten titanium and titanium-aluminum alloys saturated with solid CaO has been measured in the temperature range from 1823 to 2023 K. The equilibrium constant of reaction CaO (s)=Ca (mass pct in Ti,Ti-Al)+O (mass pct in Ti,Ti-Al) and the interaction parameter between calcium and oxygen were determined for Ti, TiAl, and TiAl₃. The standard Gibbs energy of reaction for TiAl was obtained as follows: $$\Delta G^\circ = 279,000 - 103TJ/mol$$ The possibilities for the deoxidation of titanium and titanium-aluminum alloys by using calcium-based fluxes are discussed.     

An Estimation of Complexity and Computational Costs for Vertical Block-Cyclic Distributed Parallel LU Factorization

The Vertical Block–cyclic Distributed Parallel LU Factorization Method (VBPLU) is effectively processed on a distributed memory parallel computer. VBPLU is based on the two techniques, the block algorithm and the aggregation of communications. Since startup time dominates the data communication and the aggregation reduces communication isssues, the total performance has been much improved. Furthermore this method uses long vectors so that it is also advantageous on vector processors. In this paper, we have constructed a modeling of VBPLU using a simplified LogGP model with analytical formulae, and estimated accurately the computational cost taking into account load distributions caused by data layout and process mapping. Some knowledge for optimization of block algorithm has been obtained. Our estimations have been verified through numerical experiments on three different distributed memory parallel computers.     

Voltammetric study of electrocatalysis for dioxygen reduction by trinuclear rutheniumammine complex confined in a polymer membrane

Electrocatalytic O₂ reduction was studied using a modified electrode coated with a Nafion membrane (Nf) dispersing a trinuclear ruthenium ammine complex ([(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]Cl₆, Ru-red). When measuring cyclic voltammogram under O₂ atmosphere (at 0.5 mV s⁻¹), catalytic currents due to O₂ reduction were found to develop below −0.2 V (vs. Ag/AgCl). Since Ru-red undergoes irreversible decomposition into the mononuclear complexes via the reduced state (Ru^III-Ru^III-Ru^III) (∼−0.1 V), it is suggested that the electrocatalysis originates from the decomposed species (initial active species: Ru^II(NH₃)₅(OH₂) and Ru^II(NH₃)₄(OH₂)₂) rather than from the Ru-red. Although the present electrocatalyst was also applied to H₂O₂ reduction system, the catalytic activity was found to be poor from the voltammetric behavior. It appeared that the kinetics of the electrocatalysis is much faster in the O₂ reduction than in the H₂O₂ one. A selective and direct catalysis for O₂ reduction into H₂O was suggested from a ring-disk voltammogram to take place by an aggregate of the mononuclear ruthenium complexes in the polymer matrix. In addition, it was found that electrocatalytic O₂ reduction involves a slow kinetic process, so that factors affecting the overall kinetics were discussed in terms of the catalysis mechanism.     

Bubble wake visualization by using photochromic dye

Wake structure of a single “clean bubble”, rising in rectilinear, zigzagging or spiraling path, is experimentally investigated. A single nitrogen gas bubble was produced in a silicone oil pool and the wake structure development in the rear of the rising bubble was visualized by using photochromic dye. The flexibility of this visualization method enabled us to distinguish wake from drift easily. Both bubble motion and wake structure were recorded by using stereo high-speed video camera simultaneously. We present the first experimental support for the existence of the standing eddy at the rear of the clean bubble, as predicted by a previous numerical study by Ryskin and Leal [1984. Journal of Fluid Mechanics 148, 19-35], Dandy and Leal [1986. Physics of Fluids 29(5), 1360-1366] and Blanco and Magnaudet [1995. Physics of Fluids 7(6), 1265-1274]. We study motion of a pair of vortex filaments, which is called double-threaded type wake, in the case of bubble rising in an axi-asymmetric path. Visualization results of multiple formations of horse-shoe type vortices in one period of zigzag motion of rising bubble with shape oscillations, which has not been observed in previous studies are also presented.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.