Three-Dimensional Stress Analysis of Adhesive Butt Joints of Solid Cylinders Subjected to External Tensile Loads

This paper deals with a three-dimensional stress analysis of adhesive butt joints of similar solid cylinders subjected to external tensile loads. Similar adherends and an adhesive bond are replaced with finite solid cylinders in the analysis. Stress distributions on adhesive joints are analyzed strictly by using the three-dimensional theory of elasticity. The effects of stiffness, thickness and Poisson's ratio of the adhesive bonds and of external load distribution on the normal and the shear stress distributions are shown by numerical calculations. In addition, the analytical result is compared with the result obtained by F.E.M. It is seen that they are in fairly good agreement.     

Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.     

Characterization of matched systems

A new principle of control system design called matching was recently introduced by Zakian. The principle requires the designer to choose a controller which makes a system match its environment. Characterization of matched controllers by means of Youla parameterization is discussed in this paper. Sufficient conditions for matching are given in the form of inequality constraints on the norm of the free parameters in the parametrizations based on nominal matched controllers.     

Robust scene recognition using a GA and real-world raw-image

This paper presents a new concept of scene recognition by a genetic algorithm (GA), using the 2-D gray-scale image of a working space, termed here as raw-image, and a model shaping the 2-D top-surface of a target object. In fact here, the problem of object recognition in the raw-image is changed into an optimization problem of a model-based evaluation function. We make use in this research of a GA, as a search and optimization method. This GA employs a model-based fitness function as its objective function to perform the search of a target in the raw-image. In this research, three object models, namely a frame model, a surface model, and a surface-strips model are investigated in order to determine which one is the best for scene recognition in a noisy environment. Also, in order to appraise the recognition performance of each model, a comparative study is performed by analyzing the answers to the following criteria questions: sensitivity, reliability, and speed. The effectiveness of the method has been verified through experiments using real-world raw-images, and the method has shown its robustness of object recognition with the surface-strips model, in spite of the noises in the scene.     

Proposal of limit moment equation applicable to planar/non-planar flaw in wall thinned pipes under bending

In this paper, a limit bending moment equation applicable to all types of planar and non-planar flaws in wall-thinned straight pipes under bending was proposed. A system to rationally classify the planar/non-planar flaws in wall-thinned pipes was suggested based on experimental observations focused on the fracture mode. The results demonstrate the importance of distinguishing between axial and circumferential long flaws in wall-thinned pipes.     

Microstructure and Thermoelectric Properties of Dense YB<Subscript>22</Subscript>C<Subscript>2</Subscript>N Samples Fabricated Through Spark Plasma Sintering

Dense samples of the higher boride YB₂₂C₂N have been fabricated through the spark plasma sintering (SPS) method with different sintering aids. YB₂₂C₂N is a representative of a series of newly discovered rare-earth borocarbonitrides, which may be the long-awaited n-type counterpart of boron carbide, “B₄C.” The effect of Si, SiC, Al, and TiC additions on the sintering process of YB₂₂C₂N has been studied. The best sintered bodies with densities higher than 90% of theoretical density were obtained by means of SPS at 1700°C. We show that the additive choice and pressure have an effect on grain size and density. An investigation of the effect of atmosphere on the sintering behavior has also been carried out. It was found that sinterability is enhanced under nitrogen atmosphere. Thermoelectric properties of the materials sintered with additives have been evaluated, and we discuss their dependences on the fabrication process route.     

ALP住宅

精选理由日本住宅在设计上讲究"小、巧、精致、舒适"的实用主义,特别是在集合住宅中,更会将精致与实用相结合。本案例中,建筑师以折叠的立面挑战传统建筑中方盒子形状的体量,用对角线替代绝对水平及绝对垂直线条,操弄开放与闭合之间的关系,营造实用生活空间的同时不忘精致效果。     

Proposal and development of radial air‐gap coreless generator suitable for small wind turbine used in urban area

Independent distributed power generation using small wind turbines is becoming more widespread as wind power generation increases. Installation of small wind turbines in densely populated urban areas is not only useful from the viewpoint of extracting wind power sources in weak‐wind areas but also for making renewable energy easier to access when power supplies are closer to consumers. It is from this point of view that the authors proposed “urban wind power generation” using a collective system with a number of small vertical wind turbines, and have developed a suitable generator for low‐speed vertical wind turbines such as a Savonius windmill. Based on a standard coreless generator, the proposed generator is designed to make the direction of the magnetic flux radial in order to install the magnets and coils on the outer end of the generator. The change of magnet composition and flux direction maximizes the speed of the flux change and output voltage within a limited space. With the above configuration, the power of the proposed generator is independent of the diameter. In this report, the authors describe and evaluate the fundamental performance of a prototype of the proposed generator. Based on the experiments, a maximum output power of 283 W was obtained. The obtained starting torque is small enough to begin rotation under weak wind conditions of no more than 1 m/s. Therefore, it is clear that the proposed “radial” coreless generator is suitable for self‐starting and producing high power at low wind speed. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 26– 34, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20695     

A genetic algorithm for the optimal sequential partitioning problem

The optimal sequential problem is defined as the problem of finding the minimum cost partition of the nodes of a directed acyclic graph into subsets of a given size, subject to the constraint that the precedence relationships among the elements are satisfied. A heuristic algorithm based on tabu search has been proposed for this problem [2]. However, there is a tendency for the solutions obtained by tabu search to become trapped in bad local optima in parallel graphs with random edge costs. In this paper we present a genetic algorithm for the optimal sequential partitioning problem. We develop an effective two‐point partial order crossover satisfying sequential conditions, which preserve better blocks that have a larger sum of edge costs. In this crossover we introduce the roulette selection method to escape local optima. We also assess the effectiveness of the algorithm. The results show that this proposed algorithm outperforms any other algorithm using tabu search in terms of solution quality. © 2001 Scripta Technica, Electr Eng Jpn, 135(4): 43–51, 2001