Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Comparison between Y-doped ceria and Ho-doped ceria: Electrical conduction and microstructures

The electrical conduction and microstructure in Y-doped ceria and Ho-doped ceria were investigated. Visible differences between the two doped ceria were observed. The plots of conductivity of Y-doped ceria are well fit to the Arrhenius behavior, while curvature and kinks were observed on the plots of Ho-doped ceria. Such deviation from the Arrhenius behavior could be related to the existence of precipitates in Ho-doped ceria. It indicates that the electrolytic conductivity of doped ceria could be significantly influenced by microstructure features.     

Stress intensity factor error index for finite element analysis with singular elements

An error index for the stress intensity factor (SIF) obtained from the finite element analysis results using singular elements is proposed. The index was developed by considering the facts that the analytical function shape of the crack tip displacement is known and that the SIF can be evaluated from the displacements only. The advantage of the error index is that it has the dimension of the SIF and converges to zero when the actual error of the SIF by displacement correlation technique converges to zero. Numerical examples for some typical crack problems, including a mixed mode crack, whose analytical solutions are known, indicated the validity of the index. The degree of actual SIF error seems to be approximated by the value of the proposed index.     

Three-Dimensional Stress Analysis of Adhesive Butt Joints of Solid Cylinders Subjected to External Tensile Loads

This paper deals with a three-dimensional stress analysis of adhesive butt joints of similar solid cylinders subjected to external tensile loads. Similar adherends and an adhesive bond are replaced with finite solid cylinders in the analysis. Stress distributions on adhesive joints are analyzed strictly by using the three-dimensional theory of elasticity. The effects of stiffness, thickness and Poisson's ratio of the adhesive bonds and of external load distribution on the normal and the shear stress distributions are shown by numerical calculations. In addition, the analytical result is compared with the result obtained by F.E.M. It is seen that they are in fairly good agreement.     

Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

Pollution of montane soil with Cu, Zn, As, Sb, Pb, and nitrate in Kanto, Japan

Soil cores and rainwater were sampled under canopies of Cryptomeria japonica in four montane areas along an atmospheric depositional gradient in Kanto, Japan. Soil cores (30 cm in depth) were divided into 2-cm or 4-cm segments for analysis. Vertical distributions of elemental enrichment ratios in soils were calculated as follows: (X/Al)_i/(X/Al)_BG (where the numerator and denominator are concentration ratios of element-X and Al in the i- and bottom segments of soil cores, respectively). The upper 14-cm soil layer showed higher levels of Cu, Zn, As, Sb, and Pb than the lower (14-30 cm) soil layer. In the four areas, the average enrichment ratios in the upper 6-cm soil layer were as follows: Pb (4.93) ≥ Sb (4.06) ≥ As (3.04) > Zn (1.71) ≥ Cu (1.56). Exogenous elements (kg/ha) accumulated in the upper 14-cm soil layer were as follows: Zn (26.0) > Pb (12.4) > Cu (4.48) ≥ As (3.43) ≥ Sb (0.49). These rank orders were consistent with those of elements in anthropogenic aerosols and polluted (roadside) air, respectively, indicating that air pollutants probably caused enrichment of these elements in the soil surface layer. Approximately half of the total concentrations of As, Sb, and Pb in the upper 14-cm soil layer were derived from exogenous (anthropogenic) sources. Sb showed the highest enrichment factor in anthropogenic aerosols, and shows similar deposition behavior to NO₃⁻, which is a typical acidic air pollutant. There was a strong correlation between Sb and NO₃⁻ concentrations in rainfall (e.g., in the throughfall under C. japonica: [NO₃⁻] = 21.1 [dissolved Sb], r = 0.938, p < 0.0001, n = 182). Using this correlation, total (cumulative) inputs of NO₃⁻ were estimated from the accumulated amounts of exogenous Sb in soils, i.e., 16.7 t/ha at Mt. Kinsyo (most polluted), 8.6 t/ha at Mt. Tsukuba (moderately polluted), and 5.8 t/ha at the Taga mountain system (least polluted). There are no visible ecological effects of these accumulated elements in the Kanto region at present. However, the concentrations of some elements are within a harmful range, according to the Ecological Soil Screening Levels determined by the U.S. Environmental Protection Agency.     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.     

Characterization of matched systems

A new principle of control system design called matching was recently introduced by Zakian. The principle requires the designer to choose a controller which makes a system match its environment. Characterization of matched controllers by means of Youla parameterization is discussed in this paper. Sufficient conditions for matching are given in the form of inequality constraints on the norm of the free parameters in the parametrizations based on nominal matched controllers.     

Robust scene recognition using a GA and real-world raw-image

This paper presents a new concept of scene recognition by a genetic algorithm (GA), using the 2-D gray-scale image of a working space, termed here as raw-image, and a model shaping the 2-D top-surface of a target object. In fact here, the problem of object recognition in the raw-image is changed into an optimization problem of a model-based evaluation function. We make use in this research of a GA, as a search and optimization method. This GA employs a model-based fitness function as its objective function to perform the search of a target in the raw-image. In this research, three object models, namely a frame model, a surface model, and a surface-strips model are investigated in order to determine which one is the best for scene recognition in a noisy environment. Also, in order to appraise the recognition performance of each model, a comparative study is performed by analyzing the answers to the following criteria questions: sensitivity, reliability, and speed. The effectiveness of the method has been verified through experiments using real-world raw-images, and the method has shown its robustness of object recognition with the surface-strips model, in spite of the noises in the scene.     

Proposal of limit moment equation applicable to planar/non-planar flaw in wall thinned pipes under bending

In this paper, a limit bending moment equation applicable to all types of planar and non-planar flaws in wall-thinned straight pipes under bending was proposed. A system to rationally classify the planar/non-planar flaws in wall-thinned pipes was suggested based on experimental observations focused on the fracture mode. The results demonstrate the importance of distinguishing between axial and circumferential long flaws in wall-thinned pipes.