Deposition and structural analyses of molybdenum-disulfide (MoS2)–amorphous hydrogenated carbon (a-C:H) composite coatings

In this study we developed composite coatings consisting of amorphous hydrogenated carbon (a-C:H) and molybdenum-disulfide (MoS₂), and clarified their microstructure. In addition, we interpreted the tribological properties of the composite coatings in the viewpoint of a deposition-induced microstructural modification. The coatings were produced by the hybrid deposition technique of RF-generated methane and argon plasma and DC magnetron co-sputtering of MoS₂ target. The deposition parameter investigated in this study was methane flow rate. Structural analyses were performed using a transmission electron microscope (TEM) and an atomic force microscope (AFM). Friction tests were conducted using a ball-on-disk type tribometer. From an electron micrograph, it was confirmed that nano-clusters were embedded into an amorphous carbon host matrix. Surface roughness of the composite coating was ～ 0.25 nm in R_a compared to 5.0 nm in R_a of sputtered MoS₂. The concentration measurements were performed, and the results show that the sulfur and molybdenum concentration ratio, [S]/[Mo], is ～ 0.9, which indicates that the amount of sulfur was reduced due to the discharged plasma. In friction tests, composite coatings showed high friction in a vacuum condition. It was considered that lubricant MoS₂ lamellar structures showing super-low friction in a vacuum condition during friction could not be formed between ball and coating during friction because of the lack of sulfur in embedded clusters.     

Anisotropic in vitro vessel model using poly(vinyl alcohol) hydro gel and mesh material

In the present study, the authors fabricated straight multilayer hybrid tubular in vitro vessel models (inner diameter D_in = 10 mm; thickness T = 4 mm) composed of poly(vinyl alcohol) hydrogel (PVA‐H) and anisotropic mesh materials. The authors performed tensile, stress‐relaxation and cyclic‐tensile tests using axial and circumferential test pieces as well as pressure‐diameter (P‐D) tests using tubular test piece. In the tensile and stress‐relaxation tests, the anisotropic and nonlinear mechanical properties and hysteresis characteristic of the in vitro models were confirmed. The in vitro models also showed behavior qualitatively similar to that of native arteries in cycle‐tensile and P‐D tests. These results demonstrate that the mechanical properties of native vessels can be duplicated in an in vitro model by controlling the components of the mesh material, the orientation of elastic fibers in the mesh material, and the concentration and thickness of PVA‐H layers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Identification of SYS1 as a Host Factor Required for Shiga Toxin-Mediated Cytotoxicity in Vero Cells

Shiga toxin (STx) or Vero toxin is a virulence factor produced by enterohemorrhagic Escherichia coli. The toxin binds to the glycosphingolipid globotriaosylceramide (Gb3) for its entry, and causes cell death by inhibiting ribosome function. Previously, we performed a loss-of-function screen in HeLa cells using a human CRISPR knockout (KO) library and identified various host genes required for STx-induced cell death. To determine whether this library targeted to the human genome is applicable to non-human primate cells and to identify previously unrecognized factors crucial for STx-induced cell death, we herein performed a similar screen in the African green monkey kidney-derived Vero C1008 subline. Many genes relevant to metabolic enzymes and membrane trafficking were enriched, although the number of enriched genes was less than that obtained in the screening for HeLa cells. Of note, several genes that had not been enriched in the previous screening were enriched: one of these genes was SYS1, which encodes a multi-spanning membrane protein in the Golgi apparatus. In SYS1 KO Vero cells, expression of Gb3 and sphingomyelin was decreased, while that of glucosylceramide and lactosylceramide was increased. In addition, loss of SYS1 inhibited the biosynthesis of protein glycans, deformed the Golgi apparatus, and perturbed the localization of trans-Golgi network protein (TGN) 46. These results indicate that the human CRISPR KO library is applicable to Vero cell lines, and SYS1 has a widespread effect on glycan biosynthesis via regulation of intra-Golgi and endosome–TGN retrograde transports.     

Phytoextraction by a high-Cd-accumulating rice: reduction of Cd content of soybean seeds

Soybeans (Glycine max (L) Merr.) are the major summer crop grown in Japanese upland fields (characterized by aerobic soil) that have been converted from paddies. To evaluate the effect of phytoextraction by rice on the seed cadmium (Cd) content of soybeans grown subsequently, we grew Milyang 23, a high-Cd-accumulating rice cultivar, and then grew soybeans in three paddy soils contaminated with moderate Cd concentrations (2.50-4.27 mg Cd kg(-1)). The rice accumulated 7-14% of the total soil Cd in its shoots. The soybean seed Cd contents were 24-46% less than those grown on control soils. Phytoextraction by Milyang 23 rice is thus a promising remediation method for reducing seed Cd contents of soybeans grown on paddy soils under aerobic soil conditions.     

STABILITY TEST OF SRC II DISTILLATES BY ESR

ABSTRACT

The stability of distillates derived from the SRC II coal liquefaction process has been investigated by means of electron spin resonance (e.s.r.). The samples were prepared by storing at room temperature for 8 days in air or in vacuo. The lighter fraction of distillate deteriorated more easily via oxidation than the heavier fraction.     

Dichlorodifluoromethane decomposition to CO2 with simultaneous halogen fixation by calcium oxide based materials

The decomposition of CCl2F2 to CO2 and accompanying halogen fixation by a CaO based material was studied. To improve the low reactivity of CaO, a consequence of its low surface acidity, transition metal oxides were added. Impregnation of metal acetylacetonate followed by removal of the ligand under vacuum was found to be an effective method. This method resulted in the formation of carbonaceous species and the reduction of metal oxide to metal, both of which were thought to initiate the decomposition reaction. The reactivity of these materials (MOx(a)/CaO-vac) was found to be in the following order: M = Ni > Cu > V = Fe > Mn > Co > Ca. In particular, nickel supported on CaO was most effective for the decomposition of CCl2F2. During the preparation, nickel oxide was reduced to the metal phase. CCl2F2 was decomposed to CO2 with a small amount of CO, and halogens were fixed as CaFCl, without significant deactivation at 723 K.     

Mercury oxidation by hydrochloric acid over TiO2 supported metal oxide catalysts in coal combustion flue gas

Mercury oxidation by hydrochloric acid over the metal oxides supported by anatase type TiO₂ catalysts, 1 wt.% MO_x/TiO₂ where M = V, Cr, Mn, Fe, Ni, Cu, and Mo, was investigated by the Hg⁰ oxidation and the NO reduction measurements both in the presence and absence of NH₃. The catalysts were characterized by BET surface area measurement and Raman spectroscopy. The metal oxides added to the catalyst were observed to disperse well on the TiO₂ surface. For all catalysts studied, the Hg⁰ oxidation by hydrochloric acid was confirmed to proceed. The activity of the catalysts was found to follow the trend MoO₃ ~ V₂O₅ > Cr₂O₃ > Mn₂O₃ > Fe₂O₃ > CuO > NiO. The Hg⁰ oxidation activity of all catalysts was depressed considerably by adding NH₃ to the reactant stream. This suggests that the metal oxide catalysts undergo the inhibition effect by NH₃. The activity trend of the Hg⁰ oxidation in the presence of NH₃ was different from that observed in its absence. A good correlation was found between the NO reduction and the Hg⁰ oxidation activities in the NH₃ present condition. The catalyst having high NO reduction activity such as V₂O₅/TiO₂ showed high Hg⁰ oxidation activity. The result obtained in this study suggests that the oxidation of Hg⁰ proceeds through the reaction mechanism, in which HCl competes for the active catalyst sites against NH₃. NH₃ adsorption may predominate over the adsorption of HCl in the presence of NH₃.     

Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties

Tribological properties of a diamond-like carbon (DLC) coating with an adhesive tungsten-containing DLC (W-DLC) layer were investigated. The coatings were deposited onto AISI316L steel substrates and Si wafers using plasma enhanced chemical vapor deposition and tungsten co-sputtering of the metal target. Methane and argon gases were used as the precursor of the coatings. In this study, three types of coatings were evaluated: DLC/W-DLC on AISI316L (DLC-1), DLC/W-DLC on Si wafer (DLC-2), and DLC on Si wafer (DLC-3). The structural characterizations were performed by transmission electron microscopy and tapping mode atomic force microscopy. At the boundary between the W-DLC layer and the AISI316L substrate, microscopic decohesion or delamination was not observed. The surface roughness of the DLC-1 coating was greater than that of the DLC-2 coating. This feature was derived from the surface roughness of the initial surface of the AISI316L substrate. Friction tests were performed using a rotation-type ball-on-flat configuration tribometer. The observed friction of the DLC-1 coating was unstable compared with the DLC-2 or DLC-3 coatings. This was due to wear debris which had risen to the friction surface resulting in unstable friction on the DLC-1 coating. During the friction studies, the top DLC layer was removed from the adhesive W-DLC layer because the adhesive strength at this part was not enough. In order to achieve the low and stable friction of the DLC coating with the W-DLC layer on AISI316L, it is necessary to improve the smoothness of the surface and the adhesion between the DLC coating and the W-DLC layer.     

Preliminary spectrum shifter design for intermediate energy nuclear data benchmark experiments with DT neutrons

Integral benchmark experiments with DT neutrons are not always sufficient for nuclear data benchmarking in the MeV region, below 10 MeV. A neutron spectrum shifter, which will be placed between a sample and a DT neutron source, is effective to moderate DT neutrons incident to the sample. In order to estimate effects of the spectrum shifter, the ratio of the contribution of 14 MeV neutrons in the leakage neutron and gamma-ray spectra was calculated with MCNP-4C for an experimental configuration at FNS of JAEA, Japan. The calculations were carried out for a Li₂TiO₃ sample with a Be, D₂O, or ⁷LiD spectrum shifter. It was found out that the Be shifter was superior to others and the Be shifter was effective to decrease the contribution of 14 MeV neutrons especially for secondary gamma-ray spectrum measurements.     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601