A Fiber Splicing-Plane-Inspection Technique Using Lens–Fiber Interference for the Cascaded Fiber Fabrication

In this paper, a novel inspection technique for the cascaded fiber fabrication is proposed to improve the coupling performance of such fibers. Instead of using a direct-monitoring method, an indirect technique with the help of the ray tracing and the lens-fiber interference is used. By calculating the optical-path length of the light rays passing through the fiber, the interference fringes and light intensity can be counted. Then, the splicing plane of the cascaded fiber can be determined by observing the difference between the two fiber sections. Simulations and experiments have been performed to find the splicing plane. Finally, the accuracy of fabrication can be improved from 10 to about 1 mum; thus, the coupling loss due to the fabrication process can be reduced.     

Wide-band balun using composite right/left-handed transmission line

A wide-band balun is developed using a composite right/left-handed (CRLH) transmission line (TL) at 2 GHz. It is composed of a Wilkinson power divider and two phase-adjusting transmission lines, namely the CRLH TL and the conventional TL. The input reflection coefficient is better than -10 dB from 1 to 4 GHz. Over the frequency range of 1.24-3.58 GHz, an amplitude imbalance of less than 0.7 dB and a phase error of less than plusmn10deg have been experimentally demonstrated.     

Dynamic bandwidth allocation for multimedia traffic with rate guarantee and fair access in WCDMA systems

Packet scheduling in a WCDMA system poses a new challenge due to its nature of variable bit rates and location-dependent, time-varying channel conditions. In this work, three new downlink scheduling algorithms for a WCDMA base station are proposed to support multimedia transmissions. Using a credit management and a compensation mechanism, our algorithms provide rate guarantee and fair access to mobile terminals. In particular, we propose to allow a user to simultaneously use multiple OVSF codes in a time-sharing manner, which we call a multicode, shared model. Using multiple codes allows us to compensate those users suffering from bad communication quality or even errors. The proposed schemes can tolerate a multistate link condition (compared to the typically assumed two-state, or good-or-bad, link condition) by adjusting the number of OVSF codes and the spreading factor of each code. Simulation results show that the proposed schemes do achieve higher bandwidth utilization while keeping transmission delay low.     

I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.     

Smooth side-match classified vector quantizer with variable blocksize

Although the side-match vector quantizer (SMVQ) reduces the bit rate, the image coding quality by SMVQ generally degenerates as the gray level transition across the boundaries of the neighboring blocks is increasing or decreasing. This study presents a smooth side-match method to select a state codebook according to the smoothness of the gray levels between neighboring blocks. This method achieves a higher PSNR and better visual perception than SMVQ does for the same bit rate. Moreover, to design codebooks, a genetic clustering algorithm that automatically finds the appropriate number of clusters is proposed. The proposed smooth side-match classified vector quantizer (SSM-CVQ) is thus a combination of three techniques: the classified vector quantization, the variable block size segmentation and the smooth side-match method. Experimental results indicate that SSM-CVQ has a higher PSNR and a lower bit rate than other methods. Furthermore, the Lena image can be coded by SSM-CVQ with 0.172 bpp and 32.49 dB in PSNR.     

Stable IIR notch filter design with optimal pole placement

This paper presents a two-stage approach for designing an infinite impulse response (IIR) notch filter. First, the numerator of the transfer function of the IIR notch filter is obtained by placing the zeros at the prescribed notch frequencies. Then, the denominator polynomial is determined by using an iterative scheme in which the optimal pole placements are found by solving a standard quadratic programming problem. For stability, the pole radius in the single notch filter design is specified by the designer, and in the multiple notch filter design, the pole radius is constrained by using the implications of Rouche's theorem. Examples are included to illustrate the effectiveness of the proposed techniques     

AC permeability of the flux-line liquid in the anisotropic high-Tc superconducting crystals

AC properties of the flux-line liquid in the anisotropic high-temperature superconducting crystals in a parallel field are theoretically investigated. The ac responses in the simple flux-flow regime are analyzed from associated effective ac-magnetic permeability calculated on the hydrodynamic theory basis. The responses are studied as functions of anisotropic ratio and sample dimensions. The results illustrate the influence of the platelet crystal's size on permeability in the anisotropic superconductors while in the isotropic superconductors, the relationship of responses between a square rod and cylinder is found. It indicates that the permeability of a cylinder can be essentially replaced by that of a square rod and vice versa. The geometric effect on response is also elucidated in the isotropic superconductors     

Isolated-utterance speech recognition using hidden Markov modelswith bounded state durations

Hidden Markov models (HMMs) with bounded state durations (HMM/BSD) are proposed to explicitly model the state durations of HMMs and more accurately consider the temporal structures existing in speech signals in a simple, direct, but effective way. A series of experiments have been conducted for speaker dependent applications using 408 highly confusing first-tone Mandarin syllables as the example vocabulary. It was found that in the discrete case the recognition rate of HMM/BSD (78.5%) is 9.0%, 6.3%, and 1.9% higher than the conventional HMMs and HMMs with Poisson and gamma distribution state durations, respectively. In the continuous case (partitioned Gaussian mixture modeling), the recognition rates of HMM/BSD (88.3% with 1 mixture, 88.8% with 3 mixtures, and 89.4% with 5 mixtures) are 6.3%, 5.0%, and 5.5% higher than those of the conventional HMMs, and 5.9% (with 1 mixture), 3.9% (with 3 mixtures) and 3.1% (with 1 mixture), 1.8% (with 3 mixtures) higher than HMMs with Poisson and gamma distributed state durations, respectively     

Fabrication of High-Curie-Point Barium-Lead Titanate PTCR Ceramics

High-Curie-point semiconducting barium-lead titanate positive temperature coefficient of resistivity (PTCR) ceramics of composition Ba_0.897Pb_0.1La_0.003TiO₃ and Ba_0.5Pb_0.5La_0.003TiO₃ were prepared. The starting powders were synthesized by reacting commercial BaTiO₃, PbO, and TiO₂. To avoid the nonstoichiometry due to the volatilization of Pb during the sintering process, a lead atmosphere sintering approach with PbTiO₃ as packing powder was used. The samples being fabricated by this method show a PTCR effect of 3 to 4.5 orders of magnitude above the Curie point. The curie points were about 180°C for Ba_0.897Pb_0.1La_0.003TiO₃ and about 360°C for Ba_0.497Pb_0.5La_0.003TiO₃.     

Linearity and power characteristics of SiGe HBTs at high temperatures for RF applications

In this paper, the power gain, power-added efficiency (PAE) and linearity of power SiGe heterojunction-bipolar transistors at various temperatures have been presented. The power characteristics were measured using a two-tone load-pull system. For transistors biased with fixed base voltage, the small-signal power gain and PAE of the devices increase with increasing temperature at low base voltages, while they decrease at high base voltages. Besides, the linearity is improved at high temperature for all voltage biases. However, for devices with fixed collector current, the small-signal power gain, PAE, and linearity are nearly unchanged with temperature. The temperature dependence of power and linearity characteristics can be understood by analyzing the cutoff frequency, the collector current, Kirk effect and nonlinearities of transconductance at different temperatures.