Perturbed-TEM analysis of transmission lines with imperfectconductors

A perturbed-transverse electromagnetic (TEM) approach to studying the detailed current distribution and the propagation constant of a multiconductor transmission line system with imperfect conductors is discussed. The perturbed fields are derived assuming that the fields outside the conductors are TEM waves of the corresponding lossless system and those inside the conductors satisfy the transverse magnetic (TM) modal equations. These fields are then inserted into a perturbational formula to obtain the propagation constant of the lossy system. The current distribution and the propagation constant (which clearly illustrates the loss mechanism due to the skin effect and the proximity effect) of a lossy two-wire system are presented as an example     

A Novel Pt/In0.52Al0.48As Schottky Diode-Type Hydrogen Sensor

On the basis of a Pt/In_0.52Al_0.48As metal-semiconductor structure, a novel hydrogen sensor is fabricated and demonstrated. The studied Pt/In_0.52Al_0.48As Schottky diode-type hydrogen sensor exhibits significant sensing performance including high relative sensitivity ratio of about 2600% (under the 1% H₂/air gas and V_R=-0.5 V at 30 degC), large current variation of 310 muA (under the 1% H₂/air gas and V_R=-5 V at 200 degC), widespread reverse-voltage regime (0~-5 V), stable hydrogen-sensing current-voltage (I-V) curves, and fast transient response time of 1.5 s. The calculated Schottky barrier-height change and series-resistance variation, from the thermionic-emission model and Norde method, are 87.0 meV and 288 Omega, respectively (under the 1% H₂/air gas at 30 degC). The hydrogen concentrations and operating temperatures tested in this letter are in the range of 15 ppm-1% H₂/air and 30 degC-250 degC, respectively. Based on the excellent integration compatibility with InP-based electronic devices, the studied device provides the potentiality in high-performance sensor-array applications     

Secure Handover Authentication Protocol Based on Bilinear Pairings

Handover authentication protocol enables a mobile node to switch from one base station to another without loss or interruption of service when the node exits the transmission area of his or her current base station. This paper proposes a secure prime-order handover authentication protocol based on bilinear pairings. The proposed protocol adapts the concept of pseudonyms to provide user anonymity and user unlinkability. It withstands well-known security threats and achieves mutual authentication, user unlinkability. A batch signature verification mechanism to verify a mass of signatures is presented in our scheme. We also prove that our scheme is secure under random oracle.     

Mixed Broadcast Techniques of Leisure Information in Vehicular Ad-Hoc Networks

Telecommunication Systems - Vehicle-to-vehicle communication and probabilistic broadcast are important means for information dissemination in vehicular ad-hoc networks (VANETs). In contrast to...     

A 24-GHz 3.9-dB NF low-noise amplifier using 0.18 /spl mu/m CMOS technology

A 24-GHz low-noise amplifier (LNA) was designed and fabricated in a standard 0.18-/spl mu/m CMOS technology. The LNA chip achieves a peak gain of 13.1 dB at 24 GHz and a minimum noise figure of 3.9 dB at 24.3 GHz. The supply voltage and supply current are 1 V and 14 mA, respectively. To the author's knowledge, this LNA demonstrates the lowest noise figure among the reported LNAs in standard CMOS processes above 20 GHz.     

Fabrication and Characterization of Benzocyclobutene Optical Waveguides by UV Pulsed-Laser Illumination

Buried-type benzocyclobutene (BCB) optical waveguides fabricated by UV pulsed-laser illumination are proposed and comprehensively characterized in this paper. The fabrication process is greatly simplified as compared to conventional dry-etched ridge-type BCB waveguides. The measured propagation loss at 1548 nm is as low as 0.6 dB/cm due to the buried waveguide structure. And the produced refractive index change is dependent upon the number of laser shots such that single-mode waveguides with different mode sizes can be tailored for efficient coupling. Furthermore, rigorous analyses of surface damage threshold, rms roughness, and chemical characteristics under different illumination conditions are presented to illustrate the design considerations and the chemical mechanism of the UV-induced BCB waveguides     

Kasami Code-Shift-Keying Modulation for Ultra-Wideband Communication Systems

Ultra-wideband (UWB) communication systems are generally applied to short-range wireless communications. In order to achieve higher rates or to support multiple access capabilities, direct sequence spread spectrum (DSSS) techniques have been introduced to UWB systems, and multiple pulses corresponding to a certain pseudo-noise (PN) code are transmitted to represent a symbol. In addition, the concept of M-ary code shift keying (M-CSK) was introduced into DSSS systems to achieve higher rates. In this work, we propose an M-CSK modulation technique based on the large set of Kasami sequences since it possesses good code properties, including a large code set size and low cross correlations. The modulation and demodulation schemes are developed, and the system performance in additive white Gaussian noise (AWGN) and UWB channels exposed to multiple user interference is investigated thoroughly. It was found that the Kasami M-CSK modulation is superior to other M-CSK modulation schemes in the bandwidth efficiency, and therefore a higher data rate can be achieved. Furthermore, based on our proposed demodulation scheme, the hardware complexity of receivers can be greatly reduced to O(M^1/3), and the implementation of receivers for a very large M becomes feasible.     

Morphological Stabilization by Supramolecular Perfluorophenyl‐C60 Interactions Leading to Efficient and Thermally Stable Organic Photovoltaics

A new PC₆₁BM‐based fullerene, [6,6]‐phenyl‐C₆₁ butyric acid pentafluorophenyl ester (PC₆₁BP^F) is designed and synthesized. This new n‐type material can replace PC₆₁BM to form a P3HT:PC₆₁BP^F binary blend or serve as an additive to form a P3HT:PC₆₁BM:PC₆₁BP^F ternary blend. Supramolecular attraction between the pentafluorophenyl group of PC₆₁BP^F and the C₆₀ cores of PC₆₁BP^F/PC₆₁BM can effectively suppress the PC₆₁BP^F/PC₆₁BM materials from severe aggregation. By doping only 8.3 wt% PC₆₁BP^F, device PC₆₁BP^F651 exhibits a PCE of 3.88% and decreases slightly to 3.68% after heating for 25 h, preserving 95% of its original value. When PC₆₁BP with non‐fluorinated phenyl group is used to substitute PC₆₁BP^F, the stabilizing ability disappears completely. The efficiencies of PC₆₁BP651 and PC₆₁BP321 devices significantly decay to 0.44% and 0.11%, respectively, after 25 h isothermal heating. Most significantly, this strategy is demonstrated to be effective for a blend system incorporating a low band‐gap polymer. By adding only 10 wt% PC₆₁BP^F, the PDTBCDTB: PC₇₁BM‐based device exhibits thermally stable morphology and device characteristics. These findings demonstrate that smart utilization of supramolecular interactions is an effective and practical strategy to control morphological evolution.     

Improved Light Extraction Efficiency in AlGaInP Light-Emitting Diodes by Applying a Periodic Texture on the Surface

In this letter, AlGaInP-GaP-based light-emitting diodes (LEDs) were fabricated with an Si substrate and an SiO₂-ITO-Ag omni-directional reflector using a metal-to-metal bonding technique. To enhance light extraction efficiency, a periodic texture was applied to the (Al_0.5Ga_0.5)_0.5In_0.5P surface layer of AlGaInP-Si LEDs by photolithography and a wet etching process. The exterior of the etched texture consists of a series of bowl-shaped recesses. With a 350-mA current injection, the typical output power of the AlGaInP-Si LEDs with and without the textured surface (LED-I and LED-II, respectively) were measured at approximately 118 and 81 mW, respectively, when the LED chips were bonded on the TO 46 without resin encapsulation. The enhancement of output power in LED-I can be attributed to a multitude of bowl-shaped notches on the surface, which resulted in a reduction of the reabsorption probability of the photons due to the fact that the photon path length in LED-I is shorter than in LED-II before the photons escape into the free space.