High‐pixel‐rate grating‐light‐valve laser projector

Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed.     

Experimental measurement on tangential momentum accommodation coefficient in a single microtube

The tangential momentum accommodation coefficient (TMAC) was investigated experimentally from the mass flow rate through a single microtube under the slip flow and the early part of the transition regime. The measurements were carried out by the constant-volume method under the mean Knudsen number smaller than 0.3, which is based on the mean pressure of the inlet and the outlet of the microtube, to apply the second-order slip boundary condition. To measure TMACs on various materials, quite large microtube was employed, which require the reduction in leakage. TMAC was obtained from the slip coefficient determined by the relation of the mass flow rate to the mean Knudsen number. The obtained mass flow rate was well explained by the theoretical equation. TMACs of deactivated-fused silica with argon, nitrogen, and oxygen were measured, showing the tangential momentum was not accommodated completely to the surface, and the values showed good agreement with previous studies. From the comparison between microtubes with different inner diameter, it is showed that TMAC is determined mainly by gas species and surface material.     

Translational lemmas for DLOGTIME-uniform circuits,alternating TMs,and PRAMs

We present translational lemmas for the three standard models of parallel computation, and apply them to obtain tight hierarchy results. It is shown that, for arbitrarily small rational constant , (i) there is a language which can be accepted by a -uniform circuit family of depth and size but not by any -uniform circuit family of depth and size , (ii) there is a language which can be accepted by a -time -space ATM with l worktapes but not by any -time -space ATM with the same l worktapes if the number of tape symbols is fixed, and (iii) there is a language which can be accepted by a -time PRAM with processors but not by any -time PRAM with processors. Here, c > 0, d ≥ 1, r ₁ > 1, and r ₂ ≥ 1 are arbitrary rational constants, and l ≥ 2 is an arbitrary integer. Preliminary versions of different parts of this paper appeared in Proc. MCU 2004 (LNCS 3354) and Proc. FCT 2005 (LNCS 3623).     

Acoustooptic 2-D profile shaping of a Gaussian laser beam

Acoustooptic 2-D profile shaping of a Gaussian laser beam has been achieved by two plane ultrasonic waves progressing in orthogonal directions. The spot size W of the Gaussian laser beam must be considerable less than the wavelength lambda of the ultrasonic wave at the acoustooptic interaction region. The ultrasonic cell is dealt with as a Raman-Nath 2-D phase grating but serves as a 2-D beam deflector in time for the interaction scheme of interest. The wave front of the Gaussian laser beam must be almost plane in the interaction region. The profile shaping condition is 0.15 < or = (W/lambda) < or = 0.30 only when the Raman-Nath parameter dependent on the ultrasonic power has values between v = 1.0 and 2.0.     

A high-resolution transmission electron microscope study of a zinc oxide varistor

Investigations were made of varistor microstructure, the morphology of Bi₂O₃ at multiple ZnO grain junctions, Bi₂O₃/ZnO grain boundaries and ZnO/ZnO grain boundaries (especially whether Bi₂O₃ is present or not at the ZnO/ZnO grain boundary) by means of high-resolution transmission electron microscopy and X-ray microanalysis in the scanning transmission electron microscope. Bi₂O₃ at multiple ZnO grain junctions consists of small particles of 0.1m in diameter, and they are vitrified to some extent. It is suggested that bismuth ions dissolve into ZnO grains over a 30 nm range from a Bi₂O₃/ZnO grain boundary; however, there is no bismuth at ZnO/ZnO grain boundaries.     

A flexible videoconference system based on multiagent framework

We present a design and implementation of a flexible videoconference system (VCS) using multiagent computing technology. The proposed system, we named FVCS, aims to reduce the burden of the users under the operational environment with insufficient computational resources, such as the Internet environment with small-scale computers at homes and offices, by embedding flexibility to the conventional videoconference system. In this paper, we design and implement FVCS with knowledge-based multiagent framework to realize adaptability of FVCS. We also evaluate the adaptability of the prototype systems of FVCS based on an operational situation observed in its experiments. From the result of the experiments, we conclude that the multiagent-based design and implementation is reasonable for construction of FVCS.     

Microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy produced by rapid solidification powder metallurgy

The microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy was investigated. Both rapid solidified powders and cast billets were extruded at 573, 623 and 673 K to optimize the processing conditions for obtaining better mechanical response. Powder was consolidated to prepare the extrusion billets using both cold compaction and Spark Plasma Sintering at 473 K. The tensile properties of the extruded alloy were then evaluated and correlated to the observed microstructure. The results show that the use of rapid solidified powder could lead to effective grain refinement, which in turn resulted in the improved mechanical response, especially compared to the extruded conventional cast material.     

Organic–Inorganic Nanohybrids as Novel Thermoelectric Materials: Hybrids of Polyaniline and Bismuth(III) Telluride Nanoparticles

Thermoelectric materials have received much attention recently from the viewpoint of global environmental issues and effective utilization of energy resources. Especially those effective at relatively low temperature, such as below 100°C, which are usually abandoned without use, have become noteworthy recently. From this point of view, organic thermoelectric materials are most attractive, because they could be prepared at low cost and applied in various locations due to their flexibility. We have investigated the thermoelectric properties of organic conducting polymers such as polyaniline, polypyrrole, and polyphenylenevinylene, and succeeded in increasing the thermoelectric performance by selecting dopants, stretching conducting films, etc. Recently we have focused on new systems of organic–inorganic hybrid thermoelectric materials. Herein we present the preparation of a novel system of hybrids of polyaniline and bismuth(III) telluride nanoparticles, starting from bismuth(III) chloride and tetrachlorotellurium by using polyvinylpyrrolidone as a protecting reagent, as well as their thermoelectric properties. The hybrids prepared by this particular method showed much higher thermoelectric performance than the starting organic conducting polymer.