The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles

The present paper investigates the effect of adding silica nanoparticles to an anhydride-cured epoxy polymer in bulk and when used as the matrix of carbon- and glass-fibre reinforced composites. The formation of ‘hybrid’ epoxy polymers, containing both silica nanoparticles and carboxyl-terminated butadiene-acrylonitrile (CTBN) rubber microparticles, is also discussed. The structure/property relationships are considered, with an emphasis on the toughness and the toughening mechanisms. The fracture energy of the bulk epoxy polymer was increased from 77 to 212 J/m² by the presence of 20 wt% of silica nanoparticles. The observed toughening mechanisms that were operative were (a) plastic shear-yield bands, and (b) debonding of the matrix from the silica nanoparticles, followed by plastic void-growth of the epoxy. The largest increases in toughness observed were for the ‘hybrid’ materials. Here a maximum fracture energy of 965 J/m² was measured for a ‘hybrid’ epoxy polymer containing 9 wt% and 15 wt% of the rubber microparticles and silica nanoparticles, respectively. Most noteworthy was the observation that these increases in the toughness of the bulk polymers were found to be transferred to the fibre composites. Indeed, the interlaminar fracture energies for the fibre-composite materials were increased even further by a fibre-bridging toughening mechanism. The present work also extends an existing model to predict the toughening effect of the nanoparticles in a thermoset polymer. There was excellent agreement between the predictions and the experimental data for the epoxy containing the silica nanoparticles, and for epoxy polymers containing micrometre-sized glass particles. The latter, relatively large, glass particles were investigated to establish whether a ‘nano-effect’, with respect to increasing the toughness of the epoxy bulk polymers, did indeed exist.     

Atmospheric dry deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in the vicinity of municipal solid waste incinerators

This study focuses on the atmospheric dry deposition flux of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of the two municipal solid waste incinerators (MSWIs) located in southern Taiwan. PCDD/Fs in ambient air were taken and analyzed for seventeen 2,3,7,8-substituted PCDD/Fs during November 2004 and July 2005. Results show that the mean concentrations of PCDD/Fs in the ambient air near MSWI-GS and MSWI-RW were 0.090 and 0.097pg I-TEQ/Nm(3), respectively. Dry deposition fluxes of total PCDD/Fs were 18.0 and 23.5pg I-TEQ/(m(2)d) in the ambient air near MSWI-GS and MSWI-RW, respectively, which were considerably higher than that measured in Guangzhou, China. Annual dry deposition fluxes of total PCDD/Fs in the ambient air near MSWI-GS and MSWI-RW were 189 and 217ng/(m(2)year), respectively, which were also much higher than dry deposition of total PCDD/Fs to the Atlantic Ocean. The results of the present study strongly suggest that exposure to PCDD/Fs in this area should be reduced. In addition, parametric sensitivity shows that dry deposition flux of PCDD/Fs is most sensitive to dry deposition velocity of the particle-phase, followed by air temperature and concentration of total suspended particulate but least sensitive to dry deposition velocity of the gas-phase.     

Convective heat transfer in liquid microchannels with hydrophobic and hydrophilic surfaces

Experiments were performed to study the heat transfer characteristics of channel flows of deionized (DI) water, methanol, 50 wt% DI water/50 wt% methanol mixture, and ethanol solution in asymmetrically (one sided heating) heated rectangular microchannels with an aspect ratio (H/W) of 0.56 and the corresponding hydraulic diameters (D) of 129 μm at 5 ? Re ? 240. Local heat transfer coefficients distribution were recorded with both isothermal (273 K) and isoflux (12.6, 18.1, 32.3, 50.5 mW/mm²) heating. The influences of test liquid mass flow rates, test fluids, heating condition (isothermal vs isoflux), and surface condition (hydrophilic vs hydrophobic) on heat transfer behavior were examined. Thermal entrance length were also found and correlated in terms of the relevant parameters.     

Novel Cu/Cr/Ge/Pd Ohmic Contacts on Highly Doped n-GaAs

The thermal stability of the Cu/Cr/Ge/Pd/n⁺-GaAs contact structure was evaluated. In this structure, a thin 40 nm layer of chromium was deposited as a diffusion barrier to block copper diffusion into GaAs. After thermal annealing at 350°C, the specific contact resistance of the copper-based ohmic contact Cu/Cr/Ge/Pd was measured to be (5.1 ± 0.6) × 10⁻⁷ Ω cm². Diffusion behaviors of these films at different annealing temperatures were characterized by metal sheet resistance, X-ray diffraction data, Auger electron spectroscopy, and transmission electron microscopy. The Cu/Cr/Ge/Pd contact structure was very stable after 350°C annealing. However, after 400°C annealing, the reaction of copper with the underlying layers started to occur and formed Cu₃Ga, Cu₃As, Cu₉Ga₄, and Ge₃Cu phases due to interfacial instability and copper diffusion.     

Applying the one-column, many pencil local scanning maskless lithography technology to micro-RP system

This paper introduces an innovative one column, many pencil local scanning maskless lithography technology used in dynamic mask and applies it to rapid prototyping (RP) system. By using this technology in micro RP system, the resolution of the 3-D microstructures can be upgraded remarkably. In addition, some relevant experiments are conducted on this micro rapid prototyping system. In the experiment, light beam is projected onto a digital mirror device (DMD) chip [Hornbeck LJ. Digital light processing: A new MEMS-based display, 4th Sensor Symp, p. 297–304 (1996)], and the image is reflected through a micro mirror. Meanwhile, by making use of zoom lens and pins array mask (PAM), the continuing pixels can be scattered. Moreover, in order to project scattered pixels onto the resin surface, the optical system is exploited. Additionally, by using a micro-stage, it is able to control the micro X-Y movement between the scattered pixels. Furthermore, this paper makes use of the spray coating technology to improve the build up capability of the overhand structures of the traditional deep dip liquid-type RP system. Finally, combining the fore-mentioned technologies, one can produce 3-D prototypes with overhand structures in higher resolution.     

Free radical-scavenging phytochemicals of hot water extracts of Acacia confusa leaves detected by an on-line screening method

Acacia confusa Merr. (Leguminosae), a species native to Taiwan, is widely distributed on the hills and lowlands of Taiwan, and has been traditionally used as a medicine. In this study, phytochemicals and antioxidant activities of hot water extracts from A. confusa leaves were investigated for the first time. Among all the fractions from hot water extracts of leaves, the EtOAc-soluble fraction exhibits the best DPPH radical-scavenging activity, superoxide radical-scavenging activity, and reducing power. In addition, a rapid screening method, on-line RP-HPLC-DPPH system, for individual antioxidants in the EtOAc-soluble fraction was developed. Furthermore, following solid phase extraction (SPE) and reverse-phase high-performance liquid chromatography 12 pure phenolic compounds, including five major compounds (gallic acid, (+)-catechin, (−)-epicatechin, myricetin 3-glucopyranoside, and myricetin 3-rhamnopyranoside) were detected using the developed screening method. These results demonstrated that hot water extracts of A. confusa leaves have excellent antioxidant activities and thus have great potential as a source for natural health products.     

Updating the research on the chemopreventive and therapeutic role of the peptide lunasin

Chronic diseases have become the medical challenge of the 21st century because of their high incidence and mortality rates. Modulation of diet and lifestyle habits is considered as the best strategy for the prevention of these disorders. Health promoting benefits beyond their nutritional effects have been described for multiple dietary compounds. Among these compounds, the peptide lunasin is considered as one of the most promising. Naturally present in soybean, lunasin has been extensively studied in the last two decades because of its potential against chronic diseases such as cancer, cardiovascular and immunological disorders. The purpose of this article is to summarise the evidence on the presence of lunasin in soybean and derived foods, and its bioavailability once it is orally ingested. The protective and therapeutic effects of this peptide against cancer, oxidative stress, inflammation, and high cholesterol levels as well as the molecular mechanisms of action involved in these effects are also described in this review. © 2017 Society of Chemical Industry     

Speciation of animal fat: Needs and challenges

The use of pork fat is a concern for Muslims and Jews, who for religious reasons avoid consuming anything that is pig-derived. The use of bovine materials, including beef fat, is prohibited in Hinduism and may also pose a risk of carrying the infectious agent for bovine spongiform encephalopathy. Vegetable oils are sometimes adulterated with animal fat or pork fat with beef fat for economic gain. The development of methods to determine the species origin of fat has therefore become a priority due to the complex and global nature of the food trade, which creates opportunities for the fraudulent use of these animal fats as food ingredients. However, determining the species origin of fats in processed foods or composite blends is an arduous task as the adulterant has a composition that is very similar to that of the original fat or oil. This review examines some of the methods that have been developed for fat speciation, including both fat-based and DNA-based methods, their shortcomings, and the need for additional alternatives. Protein-based methods, specifically immunoassays targeting residual proteins in adipose tissue, that are being explored by researchers as a new tool for fat speciation will also be discussed.