X20CrMoV121／Ⅲ厚壁减温器焊口的裂纹处理

通过对X20CrMoV121/Ⅲ(即F12)的Ⅱ级减温器焊口的裂纹处理,总结出了许多实际处理经验。     

推进资产证券化发展的本土化进程

在研究资产证券化发展状况的基础上，分析资产证券化在中国现有环境下所面临的许多实施上的障碍，提出了推进资产证券化本土进程的建议．     

3ds max中创建Camera Match点方法的探讨

通过创建一辅助长方体并对其进行变换，用其变换后的方向来反映3ds max中背景图像的透视方向，并利用其对场景与背景图像匹配的Camera Match点进行定位，为进行摄像机匹配提供了一种方便快捷、实用的新途径。     

铁固体超强酸催化剂的改性及结构特征

用沉淀法在一定条件下制备了由硫酸根促进的以氧化铁为主要活性组分的铁固体超强酸催化剂 ,并选择了氧化镧与氧化锆作为辅助金属氧化物添加剂进行了改性。用红外光谱测定了其分子结构 ,用流动气相色谱法测定了催化剂的比表面积和孔径结构。结果表明 ,铁固体超强酸催化剂的酸强度H0 ≤ - 1 4 5 2 ,比表面积为 1 2 4 8m2 ·g- 1 ,孔径集中在 1 0～ 2 0nm ,分子为桥式双配位结构。经改性后的催化剂用于乙酸丁酯的合成反应 ,有较高的催化活性和使用寿命。     

The effect of precipitation of Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 Al alloy

Continuous cast (CC) AA5182 Al alloy with the precipitation of Mg₂Al₃ and of MnAl₆ was cold rolled to 70% reduction and then isothermally annealed in a salt bath at three temperatures (316, 343, and 371 °C) for different times. Texture evolution during recrystallization was investigated. It was found that the recrystallization textures of the material with intense Mg₂Al₃ precipitation along the grain boundaries exhibited weaker Cube, Goss and R/β fiber components than those of the material with the more uniform fine MnAl₆ precipitates. The opposite was true in the cold rolled condition, i.e. the material with MnAl₆ precipitation had weaker Cube, Goss, and R/β fiber components in the cold rolled condition than the material with intense Mg₂Al₃ precipitation. Thus, recrystallization textures of material with Mg₂Al₃ precipitation were weaker than material with MnAl₆ precipitation. This is due to the fact that large Mg₂Al₃ particles favor the nucleation of randomly oriented grains. When subjected to formability tests, the material with prior Mg₂Al₃ precipitation displayed a lower anisotropy in tensile yield strength, ultimate tensile strength, elongation, and strain hardening exponent than material with prior MnAl₆ precipitation. This is in accord with the texture results which indicated that the recrystallization textures of material with an initial Mg₂Al₃ precipitation were closer to those of a perfectly random sample than those of material with an initial MnAl₆ precipitation. On the other hand, the elongation and Olsen values were lower and the surface quality after bending tests was worse for material with Mg₂Al₃ precipitation. This is due to the non-uniform distribution of Mg₂Al₃ particles which precipitated primarily along the grain boundaries and caused an earlier formation and coalescence of the microvoids around the grain boundary precipitates. The forming limit diagrams (FLD) correlated well with the tensile, Olsen and bending results.     

屏蔽泵石墨轴承材料的强度和耐磨性研究

对屏蔽泵的石墨轴承材料的强度、磨损性和摩擦系数进行了实验研究。在DWD-3020电子万能试验机上对普通石墨和浸润树脂石墨材料的弹性模量进行了测定，同时确定了材料的拉伸和压缩强度极限。在Falex摩擦磨损机上对材料进行了磨损试验，得到了转速和载荷对这两种材料磨损的影响，并利用CSM950扫描电子显微镜对其摩擦表面作了形貌分析。     

R∞关系的几个重要性质

在二元关系R的基础上构造了R^∞关系，给出并证明了R^∞关系的几个重要性质。这些性质在粗糙集理论中研究R^∞领域系统及其近似算子时甚为重要。     

高聚物中渗入C_(60)/C_(70)后计算内阻的压力函数法

应用宏观力学模型对高聚物渗入Ｃ６０／Ｃ７０后的微观内阻机理进行力学分析,提出分子滚珠轴承的设想,得出计算内阻的压力函数法和滚滑内阻权函数的概念。     

电势公式Φ=q/(4πε_o)(1/r-1/r′)的推广应用研究

根据唯一性定理及镜像法把真空中的电势公式Φ =q4πεo(1r - 1r′)推广到电介质中去 ,使电介质中电势的求解问题得到了进一步简化     

自干型有机硅耐烧蚀涂料制备及性能研究

针对室外露天使用的大型高温燃烧炉设备的表面防护,研制一种能够室温自干的有机硅耐烧蚀涂料。以特种环氧改性有机硅树脂作为成膜树脂,复配可熔融陶瓷粉、金属粉、耐高温填料制备有机硅耐烧蚀涂料。结果表明,所制备涂料适合在户外大面积施工应用,能在室温条件下自然干燥,无需高温加热固化,具有优异的耐热性与耐烧蚀性,可在500℃高温环境下长时间使用,可短时承受1000℃高温火焰烧蚀,并展现良好的耐中性盐雾与耐湿热性能,满足在室外大型高温燃烧炉设备表面施工与应用要求。