256-QAM (64 Gb/s) Coherent Optical Transmission Over 160 km With an Optical Bandwidth of 5.4 GHz

We report a polarization-multiplexed (Pol-Mux) 4-Gsymbol/s 256 quadrature amplitude modulation (QAM) coherent optical transmission over 160 km. A 64-Gb/s data signal was successfully transmitted with an optical bandwidth of 5.4 GHz. We also describe a Pol-Mux, 10-Gsymbol/s, 128- and 64-QAM (140 and 120 Gb/s) transmission over 150 km.      

Structural,mechanical and thermal studies of double‐molded isotactic polypropylene nanocomposites with multiwalled carbon nanotubes

Nanocomposites of isotactic polypropylene (iPP) and multiwalled carbon nanotubes (MWCNTs) with various contents of MWCNTs were fabricated by double molding techniques. X‐ray diffraction measurements reveal a development of α‐crystal with lamellar stacks having a long period of 150 Å in the neat iPP that increases to 165 Å in 2 wt % MWCNTs‐loaded composites, indicating that MWCNTs enhance crystallization of iPP as a nucleating factor. Mechanical properties, such as tensile strength, flexural strength, Young's modulus, tangent modulus, and microhardness are found to increase with increasing MWCNTs content. Thermal analyses represent an increase of crystallization and melting temperatures and a decrease of thermal stability of the composites with increasing MWCNTs. Changes in structural, mechanical, and thermal properties of the composites due to the addition of MWCNTs are elaborately discussed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Modeling of extraction behavior of docosahexaenoic acid ethyl ester by utilizing slug flow prepared by microreactor

The liquid–liquid extraction dynamics of an ethyl ester of docosahexaenoic acid (DHA‐Et) with silver ion was investigated. The kinetic model was derived according to the following stepwise processes: Diffusion of DHA‐Et across the organic film, complex‐formation between DHA‐Et and silver ion at the interface, and diffusion of extracted complex across the aqueous film. The kinetic parameters for the complex‐formation reaction were determined from the investigation with the stirred transfer cell. With the proposed model and determined parameters, we predicted the uptakes of DHA‐Et for the extraction system utilizing a slug flow prepared by a microchip. The calculated uptakes showed good correlation to the experimental data. The theoretical investigation suggested that the fast equilibration realized for the slug flow extraction system was due to the large specific interfacial area of the slug caused by the presence of wall film and the thin liquid film caused by the internal circulation. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Near-field and far-field prediction of quasi-optical grid arrays

Field profiles, equivalent isotropic radiated power (EIRP), beamwidth, and sidelobe levels of a quasi-optical power-combining grid amplifier structure are obtained using a whole-field electromagnetic analysis of a finite structure. This is efficiently obtained using a mixed spectral- and spatial-domain method-of-moments technique. It is seen that edge effects can have a significant effect on system performance     

Structural Investigation of 95(0.6Li2S0.4SiS2)5Li4SiO4 Oxysulfide Glass by Using X-ray Photoelectron Spectroscopy

S2 p and O1 s photoelectron spectra were obtained for the 95(0.6Li₂S0.4SiS₂)5Li₄SiO₄ oxysulfide glass prepared by twin-roller quenching. A four-peak deconvolution technique was used to separate the S2 p peak of the glass into the components of bridging and nonbridging sulfur atoms. As a result of the deconvolution of the S2 p peak, we found that ∼92% of the sulfur atoms were present as nonbridging atoms. The O1 s peak of the glass was separated into two components: bridging and nonbridging oxygen atoms. This separation of the O1 s peak indicated that ∼85% of the oxygen atoms were present as bridging oxygen atoms.     

Numerical study on the evaporative and condensational dissipation of phosphoric acid in PAFC

In phosphoric acid fuel cell (PAFC) stack, reduction of the phosphoric acid that is impregnated in the cell is a major factor to restrict the operating life. In this paper, the phosphoric acid reduction by the evaporative and condensational dissipation was evaluated by numerical analysis. The calculations that include the behavior of heat transfer, gas flow, and evaporation and condensation of phosphoric acid were conducted for the model cell with conditions that correspond to an on site stack. The phosphoric acid was considered as a composite of phosphorus pentoxide and water, and the evaporation and condensation rates were derived based on the nucleation theory for a two components system. The phosphoric acid distributions in the vapor phase and liquid phase at the process gas and electrode were calculated for the duration of 3300 h, and as a result of those, the exhausting and remaining amount of phosphoric acid for the cell were evaluated. The analysis results were compared with the experimental results for the model cell.     

Development of a multigrid-type microstrip gas chamber

Conventional microstrip gas chambers (MSGCs) have encountered many difficulties, such as limited gas gain and sparking damages. We propose a new multigrid-type MSGC (M-MSGC) to overcome some of these difficulties. Additional grid strips are inserted between the anode and the cathode in this new type of MSGC. Gaps between these strips are chosen to be as small as 10 μm where one can expect an efficient removal of the surface charge. With the existence of other strips with lower potentials than the anode, the field strength around the neighboring grid to the anode strip is not as high as the conventional small-gap MSGCs. The contribution of the surface streamer to the damage is greatly suppressed because the electric field parallel to the surface is screened by the intermediate grid electrodes. However, additional electrodes also screen all the electric field of the upper part of the substrate, and we cannot observe induced signals from the backside of the substrate. To overcome that difficulty, we propose another signal readout method using a patterning approach. Floating pads are placed close to the cathode strip on the surface of the M-MSGC, and the induced charges are read out via the pads. If the area of the pads is sufficiently large and the positive charges are moving toward the pads, the backside electrodes can sense the induced charge. Collected charges on the pads are leaked through the surface resistance. The backside signal through 2.3-mm-thick glass readout of the position along the cathode strips is successfully confirmed through experimental results     

Migration of 4-nonylphenol from polyvinyl chloride food packaging films into food simulants and foods.

Migration of 4-nonylphenol (NP) from polyvinyl chloride (PVC) films for food packaging into food simulants and foods has been studied in domestic applications such as wrapping of food and reheating in a microwave oven. The migration of NP from the PVC films was determined by high-performance liquid chromatography with electrochemical coulometric-array detection (LC/ED). Twelve PVC films intended for commercial use and ten for domestic applications (total: 22 samples) were analysed. Some of the PVC films (two home-use and ten retail-use) contained NP at concentrations of between 500 and 3300 microg/g. Migration of NP from the films was influenced by the test conditions (n-heptane at 25 degrees C for 60 min, distilled water at 60 degrees C for 30 min and 4% acetic acid at 60 degrees C for 30 min). The amount of NP migrating from the PVC films into n-heptane (0.33-1.6 microg/cm2) was higher than the amount migrating into distilled water or 4% acetic acid (up to 9.7 ng/cm2) for the 11 films in which NP was detected. Up to 0.23% of the NP migrated into distilled water and 4% acetic acid and up to 62.5% into n-heptane. In addition, we investigated NP migration into cooked rice samples wrapped in PVC film. Using spiked samples the method gave an average recovery of 83.7% (n = 5) with a standard deviation of 2.5%. Migration of NP ranged from not detectable (< 1.0 ng/g) to 410.0 ng/g by reheating samples in a microwave oven for 1 min and from not detectable to 76.5 ng/g by keeping samples at room temperature for 30 min.