Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Intermittent administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and prevents pancreatic exhaustion in diabetic mice

We previously demonstrated that repetitive administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and energy expenditure in obese diabetic db/db mice. However, we have not evaluated in detail the effect of single or intermittent BDNF administration on glucose metabolism in a diabetic animal model. The objectives of this study were to examine the dose-response effect and dosing interval of BDNF administration in db/db mice and to evaluate the effect of intermittent BDNF administration on pancreatic function in db/db mice. We evaluated the dose-response effect of BDNF by single administration in db/db mice. First, single administration of BDNF greater than 70 mg/kg significantly reduced blood glucose concentration one day after administered, and the BDNF effect was maintained for 6 d. Next, the effects of BDNF administered twice a week at 4, 10, 25, and 62.5 mg/kg on blood glucose concentration, and the effects of BDNF administered once a week at 10, 20, 30, 50, and 70 mg/kg on blood glucose concentration were examined in db/db mice. In the intermittent treatment studies, BDNF dose-dependently ameliorated glucose metabolism by not only the twice-a-week administration but also the once-a-week administration. Lastly, because BDNF reduces the food intake of obese hyperphagic diabetic mice, the effects of BDNF administered once or twice a week on the blood glucose concentration and plasma and pancreatic insulin concentrations in db/db mice were compared with those of the vehicle under pair-fed conditions. Under pair-fed conditions, the intermittent administration of BDNF (25 mg/kg, twice a week, or 50 mg/kg, once a week) significantly reduced the blood glucose concentration and increased the plasma and pancreatic insulin concentrations compared with those in the pair-fed vehicle-treated db/db mice. This indicates that the prolonged hypoglycemic effect of BDNF is not simply due to the reduction of food intake. In conclusion, we demonstrated that the intermittent administration of BDNF ameliorates glucose metabolism and prevents pancreatic exhaustion in obese diabetic mice. These findings indicate that BDNF may have potential as a unique hypoglycemic agent for the treatment of diabetes at a fundamental level with good patient compliance.     

Isolation and characterization of the Shiga toxin gene (stx)-bearing Escherichia coli O157 and non-O157 from retail meats in Shandong Province, China, and characterization of the O157-derived stx2 phages

Infection by Shiga toxin (Stx)-producing Escherichia coli of non-O157 and O157 serotypes are rare in China, but infection by O157 serotype was found in Shandong Province and three other provinces in China. To understand the reason for these rare infections and to determine the safety of retail meats in Shandong Province, we examined the distribution of Shiga toxin gene (stx)-bearing E. coli in retail meats and characterized the isolated stx-bearing strains. We used hybridization with DNA probes and isolated stx1- and/or stx2-positive E. coli from 31 (58%) of 53 retail meat samples, with beef showing the highest frequency (68%). Of 42 stx-positive isolates, none belonged to O157. Using the O157-specific immunomagnetic bead technique, we isolated E. coli O157 carrying the eae and stx2 genes from eight beef samples (26%). These strains produced little or no Stx2 and carried a unique q gene. Replication of the stx2 phages was detected in these strains, whereas stx2 phage replication was not detected in our previous study in which we examined similar stx2-bearing E. coli O157 strains from other Asian countries. Analysis of E. coli C600 lysogenized with the stx2 phages found in this study suggests that the lack of Stx2 production is due to changes in non-q gene region(s) of the phage genome or chromosomal mutation(s) in the host. Our data and reports by other workers suggest it is necessary to determine if various stx2-bearing E. coli O157 strains producing Stx2 to varying degrees are distributed in meats in various locations in China.     

Evaluation of a nitric acid-based partial-digestion method for selective determination of inorganic arsenic in rice

Arsenic (As) uptake in human occurs via the food chain mainly. The Joint FAO/WHO Expert Committee on Food Additives has established the provisional tolerable weekly intake level for As as an inorganic As (iAs) value, because iAs in food is much more toxic than organic As. In this study, we studied an acid based partial-digestion method for the complete extraction of arsenicals from rice. HPLC/ICP-MS was used to determine the concentration of iAs selectively. The conditions adopted to extract arsenicals from a 0.5 g of finely ground rice sample were addition of 2 mL of 0.15 mol/L nitric acid and heating at 80 degrees C for 2 hr. The LOD and LOQ for iAs were 0.0024 and 0.0079 mg/kg dry weight, respectively. Recovery studies showed good accuracy. When the method was applied to ten short-grain brown rice samples, the iAs concentrations were 0.108-0.227 mg/kg dry weight and the total As concentrations were 0.118-0.260 mg/kg dry weight. Although dimethylarsinic acid was also detected in most samples, the percentage of iAs content in total As content was 62.2-96.3%. Thus, iAs was the principal As species in the short-grain brown rice samples tested.     

l-Ascorbic acid as an alternative fuel for direct oxidation fuel cells

l-Ascorbic acid (AA) was directly supplied to polymer electrolyte fuel cells (PEFCs) as an alternative fuel. Only dehydroascorbic acid (DHAA) was detected as a product released by the electrochemical oxidation of AA via a two-electron transfer process regardless of the anode catalyst used. The ionomer in the anode may inhibit the mass transfer of AA to the reaction sites by electrostatic repulsion. In addition, polymer resins without an ionic group such as poly(vinylidene fluoride) and poly(vinyl butyral) were also useful for reducing the contact resistance between Nafion membrane and carbon black used as an anode, although an ionomer like Nafion is needed for typical PEFCs. A reaction mechanism at the two-phase boundaries between AA and carbon black was proposed for the anode structure of DAAFCs, since lack of the proton conductivity was compensated by AA. There was too little crossover of AA through a Nafion membrane to cause a serious technical problem. The best performance (maximum power density of 16 mW cm⁻²) was attained with a Vulcan XC72 anode that included 5 wt.% Nafion at room temperature, which was about one-third of that for a DMFC with a PtRu anode.     

Study on the Effects of Flow in the Volute Casing on the Performance of a Sirocco Fan

The flow at the exit from the runner blade of a centrifugal fan with forward curved blades (a sirocco fan) sometimes separates and becomes unstable. We have conducted many researches on the impeller shape of a sirocco fan, proper inlet and exit blade angles were considered to obtain optimum performance. In this paper, the casing shape were decided by changing the circumferential angle, magnifying angle and the width, 21 sorts of casings were used. Performance tests, inner flow velocity and pressure distributions were measured as well. Computational fluid dynamic calculations were also made and compared with the experimental results. Finally, the most suitable casing shape for best performance is considered.     

Characterization of the Thermo-Viscoelastic Property of Glass and Numerical Simulation of the Press Molding of Glass Lens

A measurement technique for obtaining the thermo-viscoelastic properties of glass with high accuracy is discussed. An unidirectional compression creep test was employed to measure the relaxation modulus of the glass specimens. The creep function derived from the experimental creep test is approximated by a generalized Voigt model, and then converted into a relaxation modulus expressed by a generalized Maxwell model using the Laplace transform and its inversion. Relaxation moduli and shift factors of the glass specimens BK-7 and TaF-3 were estimated according to the presented procedure, and the accuracy of the relaxation modulus was verified by a numerical demonstration using finite element analysis. A fundamental numerical simulation of the press molding of glass lenses was carried out to illustrate the validity of the thermo-viscoelastic properties obtained by the presented approach. Residual stresses under processing conditions were estimated, and the optimal conditions for residual stress minimization are discussed.     

Characterization of a class III chitinase from Vitis vinifera cv. Koshu

A chitinase gene (Chi3K) was cloned from the genomic DNA of Vitis vinifera cv. Koshu. The structural gene comprised 891 by without introns and encoded 297 amino acids. The Chi3K product showed high similarity to the class III chitinase of V. vinifera cv. Pinot noir. Chi3K was expressed using a bacterial expression vector for purification and enzymatic characterization of its gene product. The recombinant chitinase exhibited hydrolytic activity toward glycol chitin and its optimum pH was 4.0. It also inhibited the growth of Botrytis cinerea, which causes grey mold disease in grapes.     

Multiresidue analysis of pesticides in agricultural products by GC/MS coupled with database software

We evaluated a multiresidue method for determination of pesticides in agricultural products by SCAN mode GC/MS coupled with three kinds of database for 253 pesticides: relative retention time, mass spectra and calibration curve (SCAN method). Twenty-six pesticides, a total of 131 pesticides were detected in samples by the SCAN method. The detection results agreed closely with those of the SIM mode GC/MS method using calibration standards (SIM method). The ratios of the SCAN method to the SIM method ranged from 0.3 to 3.1 with SD values of 0.63. It was judged that the SCAN method could be applied to the screening analysis of pesticide residues in agricultural products, provided that the sample preparation method makes it possible to effectively remove sample matrixes with minimal loss of analytes.