延缓与加速A1-Cu合金时效析出反应的研究

研究了溶质原子浓度、Si晶体第二相、残余形变、外加莫来石(Mullite)短纤维及其交互作用，对二元Al—Cu合金时效析出行为的影响。试验材料采用挤压铸造方法制备，复合材料中纤维体积分数为18％。实验结果表明：随溶质原子浓度的升高，A1-Cu二元合金中GP，θ″和θ′相的析出都得到了相应加快；Si含量超过一定值后，随Si含量增加，A1-Cu-Si合金中GP区形成受到抑制，而θ″和θ′相的析出得到加快；形变对GP区的抑制和对θ″，θ′和θ相的加速析出具有十分明显的作用；纤维本身除对GP区抑制和对θ″，θ′相的析出加速外，还会与溶质原子、合金元素或第二相以及残余形变交互作用，使GP区被抑制，而θ″，θ′甚至θ相被加速析出等现象进一步加强。用位错理论能较好地解释析出反应延缓与加速的微观机理。     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

Effect of sodium monofluorophosphate treatment on microstructure and frost salt scaling durability of slag cement paste

Sodium-monofluorophosphate (Na-MFP) is currently in use as a surface applied corrosion inhibitor in the concrete industry. Its basic mechanism is to protect the passive layer of the reinforcement steel against disruption due to carbonation. Carbonation is known as the most detrimental environmental effect on blast furnace slag cement (BFSC) concrete with respect to frost salt scaling. In this paper the effect of Na-MFP on the microstructure and frost salt scaling resistance of carbonated BFSC paste is presented. The results of electron microscopy, mercury intrusion porosimetry (MIP) and X-ray diffraction (XRD) are discussed. It is found that the treatment modifies the microstructure and improves the resistance of carbonated BFSC paste against frost salt attack.     

On the Fatty Acid Composition of Turkish Vegetable Oils

Because of the variety of climate conditions very different oil plants except of some tropical kinds grow in Turkey. In this work four groups of raw material of Turkish vegetable oils were investigated. The first group consists of olive, sunflower and cotton, which are important raw materials in Turkey. About 97% of the oil produced in Turkey base on these three raw materials. The second group consists of sesame, poppy, linseed, hemp-seed, rape, soyabean, safflower, castor bean and groundnut, which are temporary of lower importance for Turkey. The third group consists of the non-traditional oil raw materials like tobacco seed, grape seed, scabious, fig seed, tomato seed, laurel seed, pistacia terebinthus, rice bran, maize germs, anise seed, peach-stones and pumpkin seed. The fourth group consists of fruits rich in oil like hazel-nuts, walnuts, almonds and pistachio-nuts, whose production is of great importance in Turkey.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

十四醇聚氧化烯烃醚琥珀酸单酯磺酸盐的表面活性研究

合成了一系列十四醇聚氧乙烯醚和聚氧丙烯醚琥珀酸单酯磺酸盐，比较了其临界胶束浓度、润湿力、起泡力等表面活性     

醚菊酯的气相色谱分析

本文以气相色谱内标法建立对醚菊酯的定量分析方法,其标准偏差0.18,变异系数0.24%,线性相关0.999 996,平均回收率99.98%。     

工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。