浅析在VB中使用ADO开发数据库应用程序

本文解析如何通过ADO对象对数据库进行操作,并介绍了ADO对象群中的几个重要对象Connection、Recordset、Command等。     

环境镉致肾损伤与槲皮素应用时间的研究

实验研究了镉致急性肾损伤及槲皮素对肾损伤的保护作用.将雄性Wistar大鼠随机分成对照组、镉组、槲皮素治疗组,分别对各组大鼠进行生理盐水注射、氯化镉注射、氯化镉注射加槲皮素灌胃,然后测定镉致肾损伤指标:尿蛋白含量、血尿素氮(BUN)、尿乙酰氨基葡糖苷酶(NAG)、尿γ-L-谷氨酰转肽酶(γ-GT)、尿金属硫蛋白(UMT).研究结果表明:镉组与对照组相比,肾损伤指标含量显著增高;槲皮素治疗组与镉组相比,肾损伤指标含量显著降低,且随着应用槲皮素时间的增加,肾损伤指标含量逐渐恢复.因此,镉能够导致肾损伤,而槲皮素对镉致大鼠急性肾损伤具有保护作用,且其保护作用具有时间依赖性.     

Tar sand extractions with microemulsions: I-the dissolution of light hydrocarbons by microemulsions using 2-butoxyethanol and diethylmethylamine as cosurfactants

For oil sand extractions with microemulsions it is important to disperse large quantities of light hydrocarbons in an aqueous medium. Fundamental studies on the properties of 2-butoxyethanol (BE) and diethylmethylamine (Et₂McN) in water suggest that these two liquids could be more effective cosurfactants than the usual alcohols used for this purpose. The phase diagrams of microemulsions using BE and Et₂MeN as cosurfactants, combined with typical ionic and non-ionic surfactants and typical aliphatic and aromatic hydrocarbons, were therefore investigated and compared with microemulsions based on n-butanol. Although the phase diagrams depend significantly on the nature of the surfactant and of the oil, the monophasic region generally increases with the cosurfactant in the order n-butanol < Et₂McN < BE. With the active mixture BE-cetyltrimethylammonium bromide, temperature has little effect on the phase diagram and NaCl generally destabilizes the microemulsion.     

Re-GAN：残差生成式对抗网络算法

目的 生成式对抗网络（generative adversarial network,GAN）是一种无监督生成模型,通过生成模型和判别模型的博弈学习生成图像。GAN的生成模型是逐级直接生成图像,下级网络无法得知上级网络学习的特征,以至于生成的图像多样性不够丰富。另外,随着网络层数的增加,参数变多,反向传播变得困难,出现训练不稳定和梯度消失等问题。针对上述问题,基于残差网络（residual network,ResNet）和组标准化（group normalization,GN）,提出了一种残差生成式对抗网络（residual generative adversarial networks,Re-GAN）。方法 Re-GAN在生成模型中构建深度残差网络模块,通过跳连接的方式融合上级网络学习的特征,增强生成图像的多样性和质量,改善反向传播过程,增强生成式对抗网络的训练稳定性,缓解梯度消失。随后采用组标准化（GN）来适应不同批次的学习,使训练过程更加稳定。结果 在Cifar10、CelebA和LSUN数据集上对算法的性能进行测试。Re-GAN的IS （inception score）均值在批次为64时,比DCGAN （deep convolutional GAN）和WGAN （Wasserstein-GAN）分别提高了5%和30%,在批次为4时,比DCGAN和WGAN分别提高了0.2%和13%,表明无论批次大小,Re-GAN生成图像具有很好的多样性。Re-GAN的FID （Fréchet inception distance）在批次为64时比DCGAN和WGAN分别降低了18%和11%,在批次为4时比DCGAN和WGAN分别降低了4%和10%,表明Re-GAN生成图像的质量更好。同时,Re-GAN缓解了训练过程中出现的训练不稳定和梯度消失等问题。结论 实验结果表明,在图像生成方面,Re-GAN的生成图像质量高、多样性强;在网络训练方面,Re-GAN在不同批次下的训练具有更好的兼容性,使训练过程更加稳定,梯度消失得到缓解。     

Morphology study of oriented SmBCO film deposited by MOCVD

c-axis-oriented SmBa_2Cu_3O_7(SmBCO) films have been deposited on(100)- LaA1O_3(LAO)substrate by metal organic chemical vapor deposition(MOCVD) technique.The effects of deposition temperature(T_(dep)) and total pressure(P_(tot)) on the orientation and microstructure of SmBCO films were investigated.The orientation of SmBCO films transformed from α-axis to c-axis with increasing of T_(dep) from 900 to 1 100℃.At T_(dep)=1 050℃,SmBCO films had c-axis orientation and tetragon surface.At P_(tot)~(dep)=400-800 Pa and T_(dep)=1 050 ℃,totally c-axis-oriented SmBCO films were obtained.The R_(dep) of SmBCO films increased firstly and then decreased with increasing P_(tot).The surface of SmBCO films exhibited tetragon morphology at 1 050 ℃ and400 Pa.Maximum thickness of SmBCO film deposited was 1.2μm at P_(tot)= 600 Pa,and the corresponding R_(dep)was 7.2 μm·h~(-1).     

Robust lane recognition for structured road based on monocular vision

A robust lane detection and tracking system based on monocular vision is presented in this paper.First,the lane detection algorithm can transform raw images into top view images by inverse perspective mapping(IPM),and detect both inner sides of the lane accurately from the top view images.Then the system will turn to lane tracking procedures to extract the lane according to the information of last frame.If it fails to track the lane,lane detection will be triggered again until the true lane is found.In this system,θ-oriented Hough transform is applied to extract candidate lane markers,and a geometrical analysis of the lane candidates is proposed to remove the outliers.Additionally,vanishing point and region of interest(ROI)dynamically planning are used to enhance the accuracy and efficiency.The system was tested under various road conditions,and the result turned out to be robust and reliable.     

Annealing effects on the structure and hardness of helium-irradiated Cr2AlC thin films

Cr₂AlC MAX phase thin films prepared by radio-frequency magnetron sputtering were irradiated at room temperature by 100 keV helium ions to a fluence of 1 × 10¹⁷ ions cm⁻². The effects of thermal annealing on the structural and mechanical properties of the helium-irradiated Cr₂AlC films as well as the helium release were investigated by grazing-incidence X-ray diffraction (GIXRD), Raman spectroscopy, and scanning electron microscope (SEM) in combination with nano-indentation and elastic recoil detection (ERD) analysis. The irradiation-induced structural damage in the Cr₂AlC is significantly recovered by thermal annealing at temperatures around 600℃, attributed to high defect diffusivity. After annealing to 750℃, the hardness of irradiated films recovered almost completely, which is ascribes to both defect recombination and reformation of damaged chemical bonds. Substantial helium release occurring at this annealing temperature is closely related to the damage recovery due to helium irradiation.     

Theoretical study on composition-dependent properties of ZnO·nAl2O3 spinels. Part II: Mechanical and thermophysical

Knowledge on the mechanical and thermophysical properties of ZnO·nAl₂O₃ is essential for practical applications. Based on the first-principles calculations and the bond valence method, the disordered spinel-type structure of ZnO·nAl₂O₃ (n = 1–4) was constructed to investigate the composition-dependent mechanical and thermophysical properties. The effects of cation substitution on the hardness, elastic modulus, thermal expansion, and thermal conductivity were revealed from the insights into the chemical bonds. At a higher n, the tetrahedral bond is stronger, manifested as its higher hardness and bulk modulus as well as smaller thermal expansion coefficient. Meanwhile, the octahedral bond is weaker, leading to the lower hardness and bulk modulus, along with the larger expansion coefficient. In consequence, the hardness and elastic moduli of ZnO·nAl₂O₃ are improved moderately while the expansion coefficient is decreased with the rise of n. Due to the different vibration characteristics of Zn^IV and Al^IV, the cation disorder in the 8a site provides the primary source of phonon scattering, resulting in the dramatic reduction of thermal conductivity as n increases. The understanding offers guidance on the application-oriented design of new oxide spinels.     

高阻相对La2／3Ca1／3MnO3低场磁电阻效应的影响

实验研究了La2／3Ca1/3MnO3系统晶界上掺杂(YSZ)对其输运性能和磁电阻效应(MR)的影响。样品是由溶胶．凝胶法制成的。通过对样品的电输运特性的测量表明,在掺杂量(x)低于2％时,掺杂引起电阻的增大并降低了金属．绝缘体转变温度;当掺杂量高于2％时电阻逐渐减小,且转变温度增加。而低场磁电阻效应随掺杂量增加,在x=1％时达到最大。     

Mn对Fe_3Al合金室温力学性能的影响

Ｍｎ对Ｆｅ_３Ａｌ合金室温力学性能的影响楼白杨，刘茂森，毛志远，涂江平，肖延龄，钟映宏（浙江大学）Ｆｅ３Ａｌ金属间化合物具有抗氧化耐腐蚀性良、比强度高和成本低等特点［１，２］，从而具有可观的工程应用前景。对这种材料目前国内研究的热点之一是改善其室温塑?..