The efficient lignocellulose-based sorbent for oil spill treatment from polyurethane and agricultural residue of Vietnam

In this study, new and efficient sorbent with density 0.2 g/cm³ was fabricated by incorporating rice straw into polyurethane matrix to get an open cell structure material with high oil uptake capacity. The influences of various important factors such as amount of adding rice straw, size of rice straw particles, and adsorption time on oil adsorption capacity of new sorbent material were investigated. The results showed that the oil absorption rate occurred fast in first 15–30 min, then slowed down and reached saturation level after about 2 h of treatment. Oil adsorption capacity of the new sorbent material was relatively high, up to 12.0 g/g. In comparison with pristine polyurethane or lignocellulosic materials, the new sorbents had higher oil adsorption capacity. Some characteristics of the as-obtained sorbent, such as surface shapes and porosity, were also studied by SEM analysis.     

In-situ observation on the transformation of calcium phosphate cement into hydroxyapatite

In the present study, the in-situ transformation of calcium phosphate cement into hydroxyapatite (HAp) within the first hour is monitored with a synchrotron X-ray beam. A disodium hydrogen phosphate solution is used as cement liquid to activate the reaction between dicalcium phosphate anhydrous (DCPA) and calcium hydroxide (Ca(OH)₂). The XRD analysis indicates that the amounts of DCPA and Ca(OH)₂ first decrease within the first min of the reaction. Then, the intensity of DCPA's XRD peaks starts to increase instead in the period of 5 to 20 min. After 20 min, the DCPA particles are consumed slowly to form fine HAp particles. Large pores are evident upon the completion of reaction.     

From Biomimetic Concept to Engineering Reality – A Case Study on the Design of Ceramic Reinforcement

The applications of ceramics are limited by their brittleness. Though the toughness of ceramics can be improved by adding hard and strong toughening agents, their damage tolerance is still poor. Novel concept derives from fish scale is explored and used to design alternative toughening agent. The microstructure of fish scale exhibits hierarchical complexity and many weak layers are present. As fish scales are used directly as the toughening agent, the toughness of ceramics can be enhanced. Furthermore, a new toughening mechanism involving crack deflection within fish scale is observed. Based on such observation, the toughening agents with internal weak interfaces are recommended as the toughening agent. Many ceramic/metal interfaces are present within the multilayer ceramic capacitors (MLCCs). The addition of MLCCs into brittle glass improves its crack resistance considerably.     

Managing commitments in multiple concurrent negotiations

Automated negotiation by software agents is a key enabling technology for agent mediated e-commerce. To this end, this paper considers an important class of such negotiations – namely those in which an agent engages in multiple concurrent bilateral negotiations for a good or service. In particular, we consider the situation in which a buyer agent is looking for a single service provider from a number of available ones in its environment. By bargaining simultaneously with these providers and interleaving partial agreements that it makes with them, a buyer can reach good deals in an efficient manner. However, a key problem in such encounters is managing commitments since an agent may want to make intermediate deals (so that it has a definite agreement) with other agents before it gets to finalize a deal at the end of the encounter. To do this effectively, however, the agents need to have a flexible model of commitments that they can reason about in order to determine when to commit and to decommit. This paper provides and evaluates such a commitment model and integrates it into a concurrent negotiation model.     

Blind separation of instantaneous mixture of sources via anindependent component analysis

In this paper, we introduce a procedure for separating a multivariate distribution into nearly independent components based on minimizing a criterion defined in terms of the Kullback-Leibner distance. By replacing the unknown density with a kernel estimate, we derive useful forms of this criterion when only a sample from that distribution is available. We also compute the gradient and Hessian of our criteria for use in an iterative minimization. Setting this gradient to zero yields a set of separating functions similar to the ones considered in the source separation problem, except that here, these functions are adapted to the observed data. Finally, some simulations are given, illustrating the good performance of the method     

Evolvable hardware techniques for on-chip automated reconfiguration of programmable devices

While complete automated design is a harder problem than computer-assisted design, automated hardware reconfiguration is an even more challenging problem, because it needs to adjust to limited resources and various factors, such as noise and parasitic capacitance, a resistance and inductance. This paper presents some experimental results of on-chip automated design and reconfiguration using evolvable hardware techniques. It describes a stand-alone board level evolvable system, and its use to demonstrate on-chip synthesis of new circuits in only a few seconds. The experiments presented here indicate a recovery capability in the case of extreme environmental conditions, such as extreme temperatures, that adversely affect electronics. Some of the difficulties of dealing with the real hardware are exposed, as well as challenges more generally related to automated evolution of complex electronic systems.The work described in this paper was performed at the Center for Integrated Space Microsystems, Jet Propulsion Laboratory, California Institute of Technology and was sponsored by the Defense Advanced Research Projects Agency and by the National Aeronautics and Space Administration.     

Surface-enhanced Raman scattering substrate based on a self-assembled monolayer for use in gene diagnostics

The development of surface-enhanced Raman scattering (SERS)-active substrates for cancer gene detection is described. The detection method uses Raman active dye-labeled DNA gene probes, self-assembled monolayers, and nanostructured metallic substrates as SERS-active platforms. The mercaptohexane-labeled single-stranded DNA (SH-(CH(2))(6)-ssDNA)/6-mercapto-1-hexanol system formed on a silver surface is characterized by atomic force microscopy. The surface-enhanced Raman gene (SERGen) probes developed in this study can be used to detect DNA targets via hybridization to complementary DNA probes. The probes do not require the use of radioactive labels and have a great potential to provide both sensitivity and selectivity. The effectiveness of this approach and its application in cancer gene diagnostics (BRCA1 breast cancer gene) are investigated.     

Effect of Bi2O3 and Sb2O3 on the grain size distribution of ZnO

In the present study, the effect of Bi₂O₃ and Bi₂O₃+Sb₂O₃ additions on the size distribution of ZnO grains is investigated. Without the usage of a powder bed, the addition of Bi₂O₃ provides a transient liquid phase that enhances the densification. The residual Bi segregates alters the surface/grain boundary energy ratio, which encourages the ZnO grains to grow. The size variation is also increased. The addition of both Bi₂O₃ and Sb₂O₃ induces the formation of pyrochlore, spinel and inversion boundary. Their presence reduces not only the average grain size, but also the size variation.     

光退火制备多晶硅薄膜与量子态模型

本文发现在用光退火制备多晶硅薄膜过程中退火温度、时间等与多晶硅薄膜晶粒大小等晶化性质符合量子态模型。并对其物理思想进行了分析。     

FPGA架构的功耗——低功耗FPGA设计的现在和将来

减少FPGA的功耗可带来许多好处,如提高可靠性、降低冷却成本、简化电源和供电方式、延长便携系统的电池寿命等.无损于性能的低功耗设计既需要有高功率效率的FPGA架构,也需要有能驾驭架构组件的良好设计规范.