In situ nitridation of titanium–molybdenum alloys during laser deposition

In situ nitridation during laser deposition of titanium–molybdenum alloys from elemental powder blends has been achieved by introducing the reactive nitrogen gas during the deposition process. Thus, Ti–Mo–N alloys have been deposited using the laser engineered net shaping (LENS^TM) process and resulted in the formation of a hard α(Ti,N) phase, exhibiting a dendritic morphology, distributed within a β(Ti–Mo) matrix with fine scale transformed α precipitates. Varying the composition of the Ar + N₂ gas employed during laser deposition permits a systematic increase in the nitrogen content of the as-deposited Ti–Mo–N alloy. Interestingly, the addition of nitrogen, which stabilizes the α phase in Ti, changes the solidification pathway and the consequent sequence of phase evolution in these alloys. The nitrogen-enriched hcp α(Ti,N) phase has higher c/a ratio, exhibits an equiaxed morphology, and tends to form in clusters separated by ribs of the Mo-rich β phase. The Ti–Mo–N alloys also exhibit a substantial enhancement in microhardness due to the formation of this α(Ti,N) phase, combining it with the desirable properties of the β-Ti matrix, such as excellent ductility, toughness, and formability.     

A Compact Frequency Diversity Antenna with DGS and SRR Mode Switching for LTE and WLAN/WiMAX Wireless Systems

Wireless Personal Communications - In this article, a novel low profile multi wideband planar monopole antenna is proposed to cover GSM-1800 MHz, WiMAX (3.5/5.5 GHz), WLAN...     

Development of FEA-ANN hybrid model for Equivalent Stress prediction of automobile structural member

Chassis serves as a backbone by supporting the body and diverse parts of the automobile. It ought to be sufficiently rigid to endure the shock, twist, vibration and extra stresses. Then, a vital consideration in chassis design is the strength (Equivalent Stress) for sufficient bending stiffness (Deflection). The primary goal of the research is to build up an Artificial Neural Network (ANN) model for identical stress prediction. Two side members joined to a series of cross members to make the chassis frame. The number of cross members and their locations, cross-section and the sizes of the side and the cross members turn into the design variables. The chassis frame model is created in Creo 3.0 and dissected using Ansys. Since, the number of parameters and levels are more, so the probable models are too much. By changing the Parameters, using the orthogonal array the weight of the sidebar is decreased. Then, FEA is performed on those models. ANN model is prepared by using the results of FEA. For training the ANN model, the standard back-propagation algorithm is observed to be the best. A multi-layer perception network is used for non-linear mapping between the input and the output parameters. FEA-ANN hybrid model can save material used, production cost and time.     

A serial sample loading system: interfacing multiwell plates with microfluidic devices

There is an increasing demand for novel high-throughput screening (HTS) technologies in the pharmaceutical and biotechnological industries. The robotic sample-handling techniques currently used in these industries, although fast, are still limited to operating in multiwell plates with the sample volumes per reaction in the microliter regime. Digital microfluidics offers an alternative for reduction in sample volume consumption for HTS but lacks a reliable technique for transporting a large number of samples to the microfluidic device. In this report, we develop a technique for serial delivery of sample arrays to a microfluidic device from multiwell plates, through a single sample inlet. Under this approach, a serial array of sample plugs, separated by an immiscible carrier fluid, is loaded into a capillary and delivered to a microfluidic device. Similar approaches have been attempted in the past, however, either with a slower sample loading device such as a syringe pump or vacuum-based sample loading with limited driving pressure. We demonstrated the application of our positive-pressure-based serial sample loading (SSL) system to load a series of sample plugs into a capillary. The adaptability of the SSL system to generate sample plugs with a variety of volumes in a predictable manner was also demonstrated.     

Glycolytic aminolysis of poly(ethylene terephthalate) waste for recovery of value‐added comonomer at atmospheric pressure

Reaction of poly(ethylene terephthalate) waste (PETW) powder with ethylene glycol (EG) using 0.003 mol lead acetate as a catalyst was carried out in a batch reactor at 470 K under atmospheric pressure. Reactions were undertaken with various particle sizes ranging from 50 to 512.5 μm and reaction times ranging from 10 to 60 min at 10‐min intervals. A low molecular weight product of PETW was obtained using this reaction. Then hydrazine monohydrate, chlorobenzene, and cyclohexylamine (CHA) were introduced to convert the low molecular weight product of PETW into terephthalohydrazide (TPHD). To increase the PETW conversion rate, an external catalyst (lead acetate) was introduced during the reaction. The reaction product was deposited onto the surface of unreacted PETW that was removed from the surface by introducing dimethyl sulfoxide. To accelerate the reaction rate CHA was introduced during the second stage of reaction, which has industrial significance. Depolymerization of PETW was proportional to the reaction time and inversely proportional to the particle size of PETW. Analyses of value‐added products (TPHD and EG) as well as PETW were undertaken. A kinetic model was developed and experimental data were simulated consistent with the model. A thermodynamic study was undertaken because this is required during the transfer of laboratory data through the pilot plant for commercialization. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3437–3444, 2003     

Drag on chains and agglomerates of spheres in viscous newtonian and power law fluids

New experimental data on the free settling velocity of straight chains (up to twenty spheres) and planar clusters of touching spheres in Newionian and power law media are reported. The results embrace the following ranges of conditions: 0.65 ≤ n ≤ 1; Re < - 2.5 and 1.22 < m < 48.87 Pa·sⁿ. The straight chain drag measurements are in line with theoretical predictions for Newtonian fluids. The present results in power law fluids seem to suggest that it is possible to express the drag on a straight chain of spheres in terms of that on a single sphere of equal volume. Limited results with planar clusters are satisfactorily correlated using a volume equivalent sphere diameter.     

Electrical and mechanical properties of carbon‐black‐filled,electrospun nanocomposite fiber webs

The development of flexible and compliant conductive polymer composites with textile‐like characteristics remains an important endeavor in light of the recent activity in polymer/textile‐based electronics and the need for compliant electrodes for electroactive polymer actuators. In this work, carbon black (CB) was dispersed in a polymer solution to form electrospun fiber webs consisting mainly of nanofibers. The effect of the filler content on the fiber‐web morphology, mechanical behavior, electrical conductivity, and thermal resistance was examined. The electrical conductivity percolation threshold of the fiber‐web structure was found to be around 4.6 vol %. Scanning electron micrographs of the fiber webs revealed a significant influence of the CB content on the fiber formation as well as the bond structure of the fiber web, which influenced the mechanical properties of the web. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2410–2417, 2007     

Stent use for hemodialysis access: What a general nephrologist needs to know

Recurrent stenosis due to neo‐intimal hyperplasia leads to loss of patency in an established hemodialysis access. The current treatment strategy to maintain patency involves percutaneous transluminal angioplasty with or without stent placement. There are several key points that an interventionalist needs to weigh before deciding to place a stent. These include appropriateness of stent placement, the long term consequences, the type of stent to be deployed, the size of stent and finally the impact on cannulation during dialysis. A general nephrologist needs to be aware of the various benefits and pitfalls of stent placement. The current review provides basic information that will educate the dialysis provider about stents and its use in treating dysfunctional hemodialysis access using commonly encountered clinical scenarios.     

Unique hue data for colour appearance models. Part III: Comparison with NCS unique hues

In this study, Swedish Natural Color System (NCS) unique hue data were used to evaluate the performance of unique hue predictions by the CIECAM02 colour appearance model. The colour appearance of 108 NCS unique hue stimuli was predicted using CIECAM02, and their distributions were represented in a CIECAM02 a_c–b_c chromatic diagram. The best‐fitting line for each of the four unique hues was found using orthogonal distance regression in the a_c–b_c chromatic diagram. Comparison of these predicted unique hue lines (based on the NCS data) with the default unique hue loci in CIECAM02 showed that there were significant differences in both unique yellow (UY) and unique blue (UB). The same tendency was found for hue uniformity: hue uniformity is worse for UY and UB stimuli in comparison with unique red (UR) and unique green (UG). A comparison between NCS unique hue stimuli and another set of unique hue stimuli (obtained on a calibrated cathode ray tube) was conducted in CIECAM02 to investigate possible media differences that might affect unique hue predictions. Data for UY and UB are in very good agreement; largest deviations were found for UR. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 256–263, 2015