GaInAsP/InP surface emitting injection laser with a ring electrode

-A GaInAsP/InP surface emitting injection laser (lambda = 1.2 mum) with a ring electrode has been fabricated. In this structure we separated the reflecting mirror from the p-side electrode in order to increase the reflectivity. Threshold current was 90 mA at 77 K and the operating temperature has been raised up to -85°C. The cavity length was 7.5 μm and single longitudinal mode operation was achieved.     

High-Density Frenkel Defects as Origin of N-Type Thermoelectric Performance and Low Thermal Conductivity in Mg3Sb2-Based Materials

Mg₃Sb₂-based intermetallic compounds with exceptionally high thermoelectric performance exhibit unconventional n-type dopability and anomalously low thermal conductivity, attracting much attention to the underlying mechanisms. To date, investigations have been limited to first-principle calculations and thermodynamic analysis of defect formation, and detailed experimental analysis on crystal structure and phonon modes has not been achieved. Here, a synchrotron X-ray diffraction study clarifies that, against a previous view of a simple crystal structure with a small unit cell, Mg₃Sb₂ is inherently a heavily disordered material with Frenkel defects, charge-neutral defect complexes of cation vacancies and interstitials. Ionic charge neutrality preserved in Mg₃Sb₂ is responsible for exotic n-type dopability, which is unachievable for other Zintl phase materials. The thermal conductivity of Mg₃Sb₂ exhibits deviation from the standard T⁻¹ temperature dependency with strongly limited phonon transport due to a strain field. Inelastic X-ray scattering measurement reveals enhanced phonon scattering induced by disorder. The results will draw renewed attention to crystal defects and disorder as means to explore new high-performance thermoelectric materials.     

All-optical time-division demultiplexing experiment withsimultaneous output of all constituent channels from 100 Gbit/s OTDMsignal

The successful demonstration of all-optical time-division demultiplexing is reported, wherein all 10 Gbit/s constituent channels are simultaneously demultiplexed with no error from a 10×10 Gbit/s OTDM signal. A multichannel demultiplexer based on cross phase modulation (XPM)-induced frequency shift in an optical fibre, called MOXIC, is used     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Thin reduced graphene oxide interlayer with a conjugated block copolymer for high performance non-volatile ferroelectric polymer memory

Polymer ferroelectric-gate field effect transistors (Fe-FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next-generation non-volatile memory. For minimizing gate leakage current of a device which arises from electrically defective ferroelectric polymer layer in particular at low operation voltage, the materials design of interlayers between the ferroelectric insulator and gate electrode is essential. Here, we introduce a new solution-processed interlayer of conductive reduced graphene oxides (rGOs) modified with a conjugated block copolymer, poly(styrene-block-paraphenylene) (PS-b-PPP). A FeFET with a solution-processed p-type oligomeric semiconducting channel and ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) insulator exhibited characteristic source–drain current hysteresis arising from ferroelectric polarization switching of a PVDF-TrFE insulator. Our PS-b-PPP modified rGOs (PMrGOs) with conductive moieties embedded in insulating polymer matrix not only significantly reduced the gate leakage current but also efficiently lowered operation voltage of the device. In consequence, the device showed large memory gate voltage window and high ON/OFF source–drain current ratio with excellent data retention and read/write cycle endurance. Furthermore, our PMrGOs interlayers were successfully employed to FeFETs fabricated on mechanically flexible substrates with promising non-volatile memory performance under repetitive bending deformation.     

High-power TE CO2laser with graphite electrodes

A high-power CW TE CO2laser using a new graphite anode structure and a novel Mo wire cathode is described. A uniform discharge for laser excitation is obtained. The device produces a CW output of 6 kW.     

Lacticaseibacillus paracasei K71 Alleviates UVB-Induced Skin Barrier Dysfunction by Attenuating Inflammation via Increased IL-10 Production in Mice

Scope

Ultraviolet B (UVB) radiation causes skin barrier dysfunction, leading to decreased water-holding capacity, impaired epidermal barrier function, and increased skin thickness. This study investigates the protective effects of oral administration of Lacticaseibacillus paracasei K71 against skin barrier dysfunction in UVB-irradiated mice.

Methods and results

Mice are fed diets with or without K71 and irradiated with UVB three times a week for 12 weeks. Oral administration of K71 suppresses UVB-induced decrease in stratum corneum water content, mitigates the increase of transepidermal water loss, and decreases epidermal thickness of the dorsal skin. Treatment with K71 reverses the upregulation of inflammatory cytokines and the activation of nuclear factor-κB induced by UVB irradiation and upregulates the expression of anti-inflammatory IL-10 in the dorsal skin. Notable upregulation of IL-10 is observed in the spleens of K71-treated mice. K71 treatment enhances IL-10 production in J774.1 macrophages; however, this enhancement is diminished by inhibiting K71 phagocytosis and TLR3. Furthermore, transfection using K71 RNAs significantly increases IL-10 production.

Conclusion

These results indicate that K71 may alleviate UVB-induced skin barrier dysfunction by attenuating inflammation via increasing IL-10 production and that K71 RNAs may induce IL-10 production in macrophages. Therefore, K71 may be beneficial for preventing skin barrier dysfunction.     

Development of new dosimetry using extended DNA fibers

We applied fluorescent microscopy to monitor the damage of DNA upon exposure to gamma radiation. Our developed dosimetry demonstrated that the number of breaks in DNA is proportional to the dose of the irradiation but is not dependent on dose rate of the irradiation and the GC content of DNA.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.