Nanoparticle evolution in flame spray pyrolysis—Process design via experimental and computational analysis

In flame spray pyrolysis (FSP), the evolution of metal oxide nanoparticles relies on quite a number of droplet (liquid) and vapor phase related physical mechanism as for instance precursor evaporation, oxidation, nucleation via gas-to-particle conversion mechanism, and subsequent particle (solid) growth mechanisms based on coagulation, sintering/coalescence, and agglomeration. The liquid precursor and dispersion oxygen feed rates are relevant control parameters of the FSP process for tailoring the nanoparticle size (diameter) and structure as well as the atomizer nozzle configuration. Sophisticated nonintrusive, laser-based in situ and ex situ diagnostics with multiscale spatial resolution (micrometer to meter range) are applied for analyzing droplet formation and size, gas velocity, temperature, species concentration, as well as primary and agglomerate diameters along the flow direction. Computational fluid dynamics (CFD) are coupled with population balance modeling (PBM) to elucidate the nanoparticle dynamics within the reactive spray. It is found that the CFD-PBM approach allows estimations of primary and agglomerate nanoparticle diameters within 80 and 75% accuracy compared to experimental data, suggesting that the methods presented could pave the way for designing next-generations of flame reactors.     

Effects of Microbial Utilization of Phenolic Acids and their Phenolic Acid Breakdown Products on Allelopathic Interactions

Reversible sorption of phenolic acids by soils may provide some protection to phenolic acids from microbial degradation. In the absence of microbes, reversible sorption 35 days after addition of 0.5–3 mol/g of ferulic acid or p-coumaric acid was 8–14% in Cecil A_p horizon and 31–38% in Cecil B_t, horizon soil materials. The reversibly sorbed/solution ratios (r/s) for ferulic acid or p-coumaric acid ranged from 0.12 to 0.25 in A_p and 0.65 to 0.85 in B_t horizon soil materials. When microbes were introduced, the r/s ratio for both the A_p and B_t horizon soil materials increased over time up to 5 and 2, respectively, thereby indicating a more rapid utilization of solution phenolic acids over reversibly sorbed phenolic acids. The increase in r/s ratio and the overall microbial utilization of ferulic acid and/or p-coumaric acid were much more rapid in A_p than in B_t horizon soil materials. Reversible sorption, however, provided protection of phenolic acids from microbial utilization for only very short periods of time. Differential soil fixation, microbial production of benzoic acids (e.g., vanillic acid and p-hydroxybenzoic acid) from cinnamic acids (e.g., ferulic acid and p-coumaric acid, respectively), and the subsequent differential utilization of cinnamic and benzoic acids by soil microbes indicated that these processes can substantially influence the magnitude and duration of the phytoxicity of individual phenolic acids.     

Design and Fabrication of Transparent and Gas‐Tight Optical Windows in Low‐Temperature Co‐Fired Ceramics

Low‐temperature co‐fired ceramics (LTCC) enable the fabrication of microfluidic elements such as channels and embedded cavities in electrical devices. Hence, LTCC facilitate the realization of complex and integrated microfluidic devices. Examples can be applied in many areas like reaction chambers for synthesis of chemical compounds. However, for many applications it is necessary to have an optically transparent interface to the surroundings. The integration of optical windows in LTCC opens up a wide field of new and innovative applications such as the observation of chemiluminescent reactions. These chemical reactions emit electromagnetic radiation and thus offer a method for noninvasive detection. Thin glasses (≤500 μm) were bonded by thermocompression onto a LTCC substrate. As the bonding agent, a glass frit paste was used. Borosilicate glasses, fused silica as well as silicon were successfully bonded onto LTCC. To join materials with a large coefficient of thermal expansion mismatch (i.e., fused silica and LTCC), it is necessary to limit the heat input to the bond interface. Therefore, a heating structure was integrated into the LTCC substrate beneath the bond interface. This bonding process provides a gas‐tight optical port with a high bond strength.     

RPV material investigations of the former VVER-440 Greifswald NPP

The real toughness response of RPV material can only be determined after the final shut down of the NPP. Such a chance is given now by investigating material from the former Greifswald NPP (VVER-440/230).In the first part the paper deals with fast neutron fluence calculations and retrospective dosimetry based on Niobium. Unfortunately, a second neutron reaction besides ⁹³Nb(n,n’) leading to ^93mNb-activity is the reaction ⁹²Mo(n,γ)⁹³Mo. Based on the found Nb and Mo contents in the RPV material, it turned out that the ^93mNb generation on the Mo path mostly dominates over the fast neutron induced generation from Nb.The comparison between the calculated and the measured ^93mNb activities typically resulted in deviations of 50%. Possible reasons for the observed differences are discussed.In the second part first results of fracture mechanic investigations are reported. SE(B) specimens from three thickness positions were tested and evaluated according to the test standard ASTM E1921-05. Cleavage fracture toughness values, K_Jc, were determined and Master Curve based reference temperatures (T₀) were evaluated. The T₀ measured at the inner surface of the RPV did not represent the conservative condition. The T₀ of disc 1-1.3 located between the surface and 1/4 thickness is about 40K higher compared with those of the surface.The measured K_Jc values are not enveloped by the 5% fractile indexed with T₀ according to the Master Curve concept. However, the 5% fractile indexed with the VERLIFE reference temperature RTT_o that includes an additional margin envelops the measured K_Jc values. Therefore the VERLIFE lower bound curve conservatively describes the fracture toughness of the investigated weld metal.     

Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells

Parasitic absorption in transparent electrodes is one of the main roadblocks to enabling power conversion efficiencies (PCEs) for perovskite‐based tandem solar cells beyond 30%. To reduce such losses and maximize light coupling, the broadband transparency of such electrodes should be improved, especially at the front of the device. Here, the excellent properties of Zr‐doped indium oxide (IZRO) transparent electrodes for such applications, with improved near‐infrared (NIR) response, compared to conventional tin‐doped indium oxide (ITO) electrodes, are shown. Optimized IZRO films feature a very high electron mobility (up to ≈77 cm² V^?1 s^?1), enabling highly infrared transparent films with a very low sheet resistance (≈18 Ω □^?1 for annealed 100 nm films). For devices, this translates in a parasitic absorption of only ≈5% for IZRO within the solar spectrum (250–2500 nm range), to be compared with ≈10% for commercial ITO. Fundamentally, it is found that the high conductivity of annealed IZRO films is directly linked to promoted crystallinity of the indium oxide (In₂O₃) films due to Zr‐doping. Overall, on a four‐terminal perovskite/silicon tandem device level, an absolute 3.5 mA cm^?2 short‐circuit current improvement in silicon bottom cells is obtained by replacing commercial ITO electrodes with IZRO, resulting in improving the PCE from 23.3% to 26.2%.     

Reconfigurable CMOS with undoped silicon nanowire midgap Schottky-barrier FETs

In this paper we report on a newly developed multi-gate nanowire-field-effect device (NWFET) in which the transistor type (i.e. PMOS and NMOS) is freely selectable by the application of a control-voltage. This significantly adds to flexibility in design of integrated circuits and their fabrication, respectively. We will show, that the use of midgap Schottky-barrier source and drain contacts are the key enabler for this device concept to be functional. A fully functional freely configurable CMOS-NWFET inverter circuit is presented, demonstrating the capability of this SOI technology platform. All this makes the presented NWFET-technology suitable for the fabrication multi-purpose devices for many applications.     

Non-monotonic lattice parameter variation with crystallite size in nanocrystalline solids

An anomalous dependence of the lattice parameter on the crystallite size of nanocrystalline ball-milled powders of metals was observed: lattice contraction followed by lattice expansion with decreasing crystallite size. These data were determined by application of detailed X-ray diffraction measurements. To this end the lattice parameters of the metals investigated – nickel, copper, iron and tungsten – were precisely determined by correcting for influences of stacking faults, in the face-centred cubic metals, as well as by correcting for instrument-related aberrations. The non-monotonic variation of the lattice constant was interpreted as the result of two competing mechanisms: interface-stress-induced contraction vs. expansion as a result of the stress field generated at the crystallite boundary due to the increased excess free volume in the crystallite boundary upon decreasing crystallite size.     

Microtensile testing of submicrometer thick functional polymer samples

Organic electronic devices are currently being introduced in commercial applications such as flexible displays. Due to the mechanical loading of these devices during bending, it is important to know the mechanical properties in order to assess reliability. It is therefore essential to develop experimental setups for the mechanical characterization of submicrometer thick functional polymer layers. In this paper a new microtensile approach is presented along with first results for Young's modulus of polyimide (PI) and the conductive polymer PEDOT:PSS obtained using this method. The microtensile specimen are made of a bilayer consisting of PI as the substrate layer and of a submicron layer of PEDOT:PSS deposited on top of it. The mechanical properties are derived from comparison of measurements performed on samples with and without the functional layer and by varying this layer's thickness. A thorough error analysis is also presented to provide an overview of the precision inherent in this approach. The experiments yield Young's moduli of 3.28 ± 0.34 GPa for PI and of 4.51 ± 0.34 GPa for PEDOT:PSS.