Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

Microstructure of the HMX‐Based PBX KS32 after Mechanical Loading

Non‐destructive X‐ray diffraction techniques were applied in order to monitor the influence of mechanical and shock‐loading on the microstructure of the plastic‐bonded high explosive KS32. The investigations uncovered damage to embedded coarse HMX crystals and to the binder system HTPB‐IPDI. Damage to the crystals occurred already during the kneading process in terms of deformation twinning. On higher loading between 400 MPa (static) and 480 MPa (dynamic) also crystal fracture was observed. The change in the binder structure was found after both static and dynamic loading, but not in the cured, differently kneaded samples. Moreover, the change in binder structure after dynamic loading was verified by dynamic mechanical analysis, and interpreted as a partial damage of the binder rubber shell around the explosive particles. The results are compared to literature data from imaging techniques.     

Carbon nanotubes‐filled thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

This article reports the preparation and characterization of multiwalled carbon nanotubes (MWCNTs)‐filled thermoplastic polyurethane–urea (TPUU) and carboxylated acrylonitrile butadiene rubber (XNBR) blend nanocomposites. The dispersion of the MWCNTs was carried out using a laboratory two roll mill. Three different loadings, that is, 1, 3, and 5 wt % of the MWCNTs were used. The electron microscopy image analysis proves that the MWCNTs are evenly dispersed along the shear flow direction. Through incorporation of the nanotubes in the blend, the tensile modulus was increased from 9.90 ± 0.5 to 45.30 ± 0.3 MPa, and the tensile strength at break was increased from 25.4 ± 2.5 to 33.0 ± 1.5 MPa. The wide angle X‐ray scattering result showed that the TPUU:XNBR blends were arranged in layered structures. These structures are formed through chemical reactions of ? NH group from urethane and urea with the carboxylic group on XNBR. Furthermore, even at a very low loading, the high degree of nanotubes dispersion results in a significant increase in the electrical percolation threshold. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40341.     

Apple Allergy: The cDNA Sequence of the Major Allergen of Apple,Determined by Performing PCR with a Primer Based on the N-Terminal Amino Acid Sequence,is Highly Homologous to the Sequence of the Major Birch Pollen Allergen

Considering the known N-terminal amino acid sequence of the major apple allergen, a polymerase chain reaction (PCR) primer was selected to amplify cDNA encoding this protein. A single PCR product was obtained, cloned into Escherichia coli and subsequently sequenced. The missing 5′-end of the apple cDNA sequence was obtained by a 5′-RACE method. The cDNA sequence showed 72% identity with the coding region of one of the known isoforms of Bet v 1, the major allergen of birch pollen. The deduced amino acid sequence resulted in a 158-residue protein with a calculated molecular mass of 17·5 kDa and 63% amino acid sequence identity to Bet v 1. In addition, further protein alignments showed a high degree of identity with allergens from other tree pollens and some ‘pathogenesis-related proteins’ from food plants. According to international regulations the allergen was termed Mal d 1 for this protein, it being the first major allergen discovered and characterised in fruits of apple (Malus domestica).     

Synthese und Konformationsanalyse von Pyranophanonen und Pyrylophanium-Verbindungen mit intraannularen Substituenten

Synthesis and Conformational Analysis of Pyranophanones and Pyrylophanium Compounds with Intraannular Substituents The synthesis of [3.3]dithiapyranophanone 6 and 11 is accomplished by use of the two-components-dilution-principle. Pyrolysis of their bis(sulfones) 7 and 12 gives the [2.2]pyranophanones 8 , 9 and 13 . Under preservation of conformation the intraannular carbonyl-function is used for the synthesis of methylpyranophanoles 14 , 16 and 17 . The synthesis of pyrylophanium compounds 15 and 18 is possible by elimination in trifluoroacetic acid. 6 exhibits anti-conformation within its crystal-structure and like 7 reveals temperature-dependent behavior in solution. Using 6 as an example, a combination of ¹³C-NMR-spectroscopy, forcefield-calculation and computer-simulation is applied for the first time to give evidence for molecular-dynamic processes of cyclophanes. 8 and 9 are the syn- and anti-conformers of the desired product, as shown by X-ray structural analysis. 13 reveals anti-conformation within its crystal structure as well as in solution. The conformational analysis of other new phanes described here is based on the ¹H-NMR-spectra of these pyrolysis products. As expected the intraannular substituents of Pyrylophanium-lons 15 and 18 show the characteristic upfield-shift within their ¹H-NMR-spectra.