Wasserlösliche hochpolymere als strömungsbeschleuniger

Soluble high polymers drastically reduce the friction or drag of turbulent wall flows; this effect is widely known as drag reduction. In practical applications drag reducing polymers also bring about an increase in flow rate. That is why we have introduced the term flow enhancer for this type of polymer. Drag reduction by polymers was discovered in 1948. The addition of very small amounts (ppm) of a high polymer reduces the pressure drop in turbulent pipe flow by up to 80 % or increases the flow rate by up to 100 %. These rheological effects are demonstrated with the aid of laboratory experiments. A physical model is presented which describes the interference of the coiled macromolecule in turbulent boundary layers with elongational velocity gradients. From this theory are derived a number of requirements for particularly effective macromolecules, such as molar mass, conformation, linearity and electrical charges in the molecule. The well-known water soluble drag reducing polymers are presented and the influence of pH, electrolytes and temperature described. Finally a survey of practical applications with experiments describing the operation of a specially designed flow enhancer for hydrotransport of sand slurries is given.     

Inhibition and recovery of cucumber roots given multiple treatments of ferulic acid in nutrient culture

Ferulic acid, a frequently cited allelopathic agent, inhibited photosynthesis, leaf expansion, and root elongation of cucumber seedlings grown in aerated nutrient cultures in a growth chamber. Other effects were a reduction in the proportion of radioactivity fixed by photosynthesis translocated to roots, a stimulation in secondary root initiation, and an increase in root-shoot ratios. Inhibition of leaf expansion and root elongation induced by multiple ferulic acid treatments was rapidly lost once ferulic acid was removed from the root environment. The changes in general root morphology, i.e., average root length and root number, associated with ferulic acid treatments, were partially reversed or not affected when ferulic acid was removed from the root environment.Paper No. 11411 of the Journal Series of the North Carolina Agricultural Research Service, Raleigh, North Carolina 27695-7601. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Research Service of the products named, nor criticism of similar ones not mentioned.     

Crop residue,manure and fertilizer in dryland maize under reduced tillage in northern China: I grain yields and nutrient use efficiencies

The rapidly increasing population and associated quest for food and feed in China has led to increased soil cultivation and nitrogen (N) fertilizer use, and as a consequence to increased wind erosion and unbalanced crop nutrition. In the study presented here, we explored the long-term effects of various combinations of maize stover, cattle manure and nitrogen (N) and phosphorus (P) fertilizer applications on maize (Zea mays L.) yield and nutrient and water use efficiencies under reduced tillage practices. In a companion paper, we present the effects on nutrient balances and soil fertility characteristics. The ongoing factorial field trial was conducted at Shouyang Dryland Farming Experimental Station in northern China from 1993 onwards. The incomplete, determinant-optimal design comprised 12 treatments, including a control treatment, in duplicate. Grain yields and N, P, and potassium (K) uptakes and N, P and K use efficiencies were greatly influenced by the amount of rain during the growing season (GSR), and by soil water at sowing (SWS). There were highly significant interactions between GSR and added stover and manure, expressed in complex annual variations in grain yield and N, P and K use efficiencies. Annual mean grain yields ranged from 3,000 kg ha⁻¹ to 10,000 kg ha⁻¹ and treatment mean yields from 4,500 kg ha⁻¹ to 7,000 kg ha⁻¹. Balanced combination of stover (3,000–6,000 kg), manure (1,500–6,000 kg) and N fertilizer (105 kg) gave the highest yield. Stover and manure were important for supplying K, but the effects differed greatly between years. Overall mean N recovery efficiency (NRE) ranged from 28% to 54%, depending on N source. NRE in wet years ranged from 50% to 90%. In conclusion, balanced combinations of stover, manure and NP fertilizer gave the highest yield and NRE. Reduced tillage with adding stover and manure in autumn prior to ploughing is effective in minimizing labor requirement and wind erosion. The potentials of split applications of N fertilizer, targeted to the need of the growing crop (response farming), should be explored to further increase the N use efficiency.     

Influence of Phenolic acids on microbial populations in the rhizosphere of cucumber

Experiments were conducted to determine whether changes in soil microbial populations that occur in response to additions of certain allelopathic phenolic acids to bulk soil also occur in the rhizosphere. Cucumber seedlings were transplanted into cups containing a nutrient-enriched mixture of Portsmouth B₁, soil and sand and were watered five times (once every 48 hr) with aqueous solutions of ferulic,p-coumaric, or vanillic acid (each at 0, 0.25, or 0.50ol/g soil material). Nutrient solution was applied on alternate days. Leaf growth was suppressed by up to 42% by phenolic acids, but changes in root growth varied with the compound and concentration in solution. Significant increases (over 600% relative to controls) in populations of fast-growing bacteria in the rhizosphere were detected after two but not after five treatments, and increases (400% relative to controls) in numbers of fungal propagules were detected after five treatments. Such increases suggested that chronic exposure to a phenolic acid might resuit in high populations of rhizosphere microorganisms that could metabolize the compounds and thus alter observable responses by the plant. To test this, plants were watered repeatedly with a low-concentration solution of ferulic acid (chronic treatments; 0.0 or 0.1mol/g soil material in one experiment, 0.000 or 0.025imol/g soil material in a second) and then once with a highconcentration solution (acute treatment; 0.0, 0.5, or 1.0mol/g soil material in the first experiment; 0.000, 0.125, or 0.250mol/g soil material in the second).Paper No. 12385 of the Journal Series of the North Carolina Agricultural Research Service, Raleigh, North Carolina. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Research Service or the United States Department of Agriculture of the products named, nor criticism of similar ones not mentioned. Acute treatments and some chronic treatments suppressed leaf growth, but results were inconsistent for root growth. Acute treatments increased numbers of several types of bacteria in the rhizosphere but had inconsistent effects on fungi. Chronic treatments had no effect on numbers of bacteria or fungal propagules in the rhizosphere. Furthermore, chronic treatments did not alter responses of plants or microbial populations to the subsequent acute treatment. Results demonstrated that phenolic acids in soil, which must pass through the rhizosphere before interaction with plant roots can occur, alter the microbial ecology of the rhizosphere. However, microbially mediated acclimation of plants to relatively high concentrations of ferulic acid was not observed.     

Surface reconstruction for incremental forming

In spite of extensive efforts being made with regard to virtual process optimization technology, the production of prototype parts is still a necessity. With respect to the production of sheet metal parts in low quantities, incremental sheet metal forming (ISMF) is a highly interesting process. ISMF allows the production of complex parts with drastically reduced costs in tooling and machinery compared to conventional processes like deep drawing. However, ISMF, with it’s incremental nature, introduces the need for generating a tool path considering both final geometry and process-induced deviations or constraints. Consequently, for the generation of the tool path a (tool path) surface, with an adequate offset, is necessary. That is why, within the scope of extensive research work at the Institute of Forming Technology and Lightweight Construction (IUL), a special correction module has been developed, determining this offset e.g. depending on the workpiece geometry. This paper presents the algorithm, the application, and the effect on the produced parts. Furthermore, a concept for an extension regarding further constraints like elastic workpiece behavior is presented.     

Electrochemical oxidation analysis for dressing bronze-bonded diamond grinding wheels

Electrochemical dressing of fine-grained metal-bonded diamond grinding wheels enables to grind hard and brittle materials in the ductile mode. Optical surfaces can be manufactured by grinding, which reduces the need for subsequent, time-consuming polishing work. When using metal-bonded grinding wheels, the emerging oxides regulate the electrochemical dissolution. Bronze-bonded grinding wheels are more suitable for grinding cemented carbides and ceramics than iron-bonded grinding wheels, as it is easier to modify their chemical composition to suit a specific grinding task. They can also be sintered at lower temperatures, which reduces the risk of thermal damage to the diamond. In this paper, the dissolution and the oxidation of different bronze alloys are characterized for the electrochemical dressing process. The relevant evaluation criteria are the oxide layer thickness, the electrical behavior and the different emerging bronze alloy oxides. This work is funded by the German Research Association DFG within the Transregional Collaborative Research Center SFB/TR4 “Process Chains for the Replication of Complex Optical Elements”.     

Incorporating Intra‐Query Term Dependencies in an Aspect Query Language Model

Query language modeling based on relevance feedback has been widely applied to improve the effectiveness of information retrieval. However, intra‐query term dependencies (i.e., the dependencies between different query terms and term combinations) have not yet been sufficiently addressed in the existing approaches. This article aims to investigate this issue within a comprehensive framework, namely the Aspect Query Language Model (AM). We propose to extend the AM with a hidden Markov model (HMM) structure to incorporate the intra‐query term dependencies and learn the structure of a novel aspect HMM (AHMM) for query language modeling. In the proposed AHMM, the combinations of query terms are viewed as latent variables representing query aspects. They further form an ergodic HMM, where the dependencies between latent variables (nodes) are modeled as the transitional probabilities. The segmented chunks from the feedback documents are considered as observables of the HMM. Then the AHMM structure is optimized by the HMM, which can estimate the prior of the latent variables and the probability distribution of the observed chunks. Our extensive experiments on three large‐scale text retrieval conference (TREC) collections have shown that our method not only significantly outperforms a number of strong baselines in terms of both effectiveness and robustness but also achieves better results than the AM and another state‐of‐the‐art approach, namely the latent concept expansion model. © 2014 Wiley Periodicals, Inc.