Temperature dependence of oxygen diffusion into polymer/carbon nanotube composite films

This study examines the transport properties of polystyrene (PS)/multiwalled carbon nanotube (MWNT) composite films taking into consideration both MWNT composition and temperature, via fluorescence technique. Three different (3, 15, and 40 wt%) MWNT content films were prepared from PS/MWNT mixtures by annealing them at 170°C, above the glass transition temperature of PS for 10 min. The diffusivity of the PS/MWNT composite was determined by performing oxygen (O₂) diffusion measurements within a temperature range of 24 to 70°C for each film and pyrene (P) was used as the fluorescent probe. The diffusion coefficients (D) of oxygen were determined by the fluorescence quenching method assuming Fickian transport. Results indicated that D values are strongly dependent on both temperature and the MWNT content in the film and it was also observed that D coefficients obey Arrhenius behavior, from which diffusion energies were produced and increased along with increases of MWNT content. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Variation in surface roughness,wettability and some plywood properties after preservative treatment with boron compounds

Wood can be protected from attack by pests with preservative treatment of the many different preservatives available for wood; borates are generally preferred for indoor uses and can be used to treat solid wood and engineered wood composites. Although treated panels make up a large part of the plywood market, treatment with some wood preservatives has been known to interfere with the bond integrity of glued wood specimens. In this study, the possible effects of borax and boric acid treatment on adhesive wettability and surface roughness of veneers and bond strength and hygroscopicity of plywood panels were tested. No clear changes in surface roughness after borax and boric acid treatment were observed. Poor wettability on the surfaces of alder and beech veneers with UF resin after borate treatments was obtained. Bond strength values of plywood panels decreased and equilibrium moisture content (EMC) of plywood panels increased after borate treatment.     

Treatment of leachate by electrocoagulation using aluminum and iron electrodes

In this paper, treatment of leachate by electrocoagulation (EC) has been investigated in a batch process. The sample of leachate was supplied from Odayeri Landfill Site in Istanbul. Firstly, EC was compared with classical chemical coagulation (CC) process via COD removal. The first comparison results with 348 A/m2 current density showed that EC process has higher treatment performance than CC process. Secondly, effects of process variables such as electrode material, current density (from 348 to 631 A/m2), pH, treatment cost, and operating time for EC process are investigated on COD and NH4-N removal efficiencies. The appropriate electrode type search for EC provided that aluminum supplies more COD removal (56%) than iron electrode (35%) at the end of the 30 min operating time. Finally, EC experiments were also continued to determine the efficiency of ammonia removal, and the effects of current density, mixing, and aeration. All the findings of the study revealed that treatment of leachate by EC can be used as a step of a joint treatment.     

Evaluation of the radiative recombination mechanism in Si nanocrystals embedded in Silica matrix

We report measurements of the temperature dependence of photoluminescence (PL) life-time and efficiency of Si nanocrystals (Si-Nc) embedded in silica matrix. We use a practical technique based on lock-in acquisition that allows us to simultaneously evaluate, at each emission-energy, intensity and decay-time of the detected signal. Samples are prepared by Silicon-ion implantation in a SiO2 layer followed by thermal annealing. The implantation dose of Si ions ranges between 2 x 10(16) cm-2 and 2 x 10(17) cm(-2). Intensity of Si-Nc PL shows the characteristic rising by increasing the temperature up to approximately 100 K followed by a flattening or a weak reduction up to room temperature. This behaviour reveals a population of radiative states built up by a thermally activated process. Similarly, the measured PL decay-rate is not constant with temperature but shows evidence of a thermal activation. By measuring on different samples the activation energies Ea involved in the temperature dependence of PL intensity and decay time we verify that in all these processes Ea is a decreasing function of implantation dose (i.e., of crystallite size). This result is consistent with models connecting radiative recombination to excitons confined inside Si-Nc, in seeming contrast with the common attribution of PL of non-passivated Si-Nc to the recombination from surface/interface states. To verify the consistency of this statement, we have compared our experimental data with the predictions of quantum confinement theory obtaining an excellent agreement.     

Application of Classification and Regression Tree (CART) analysis on the microflora of minced meat for classification according to Reg. (EC) 2073/2005

In a retrospective study on the microbiology of minced meat from small food businesses supplying directly to the consumer, the relative contribution of meat supplier, meat species and outlet where meat was minced was assessed by "Classification and Regression Tree" (CART) analysis. Samples (n=888) originated from 129 outlets of a single supermarket chain. Sampling units were 4-5 packs (pork, beef, and mixed pork-beef). Total aerobic counts (TACs) were 5.3±1.0 log CFU/g. In 75.6% of samples, E. coli were <1 log CFU/g. The proportion of "unsatisfactory" sample sets [as defined in Reg. (EC) 2073/2005] were 31.3 and 4.5% for TAC and E. coli, respectively. For classification according to TACs, the outlet where meat was minced and the "meat supplier" were the most important predictors. For E. coli, "outlet" was the most important predictor, but the limit of detection of 1 log CFU/g was not discriminative enough to allow further conclusions.     

In vitro evaluation of antimicrobial and antibiofilm potentials of silver nanoparticles biosynthesised by Streptomyces griseorubens

This study was performed to determine the antimicrobial and antibiofilm activities of silver nanoparticles (AgNPs) biosynthesised using Streptomyces griseorubens AU2 isolated from soil. The antimicrobial activity of the AgNPs was determined by agar well diffusion, disc diffusion and broth microdilution methods. Diameters of the zone of inhibition results clearly displayed that the microbially biosynthesised AgNPs have potent antimicrobial activity against Candida albicans, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. The minimum inhibitory concentration (MIC) and minimum lethal concentration (MLC) of the nanoparticles that had been determined by broth microdilution method were found to be 20 and 50 µg/ml for C. albicans, B. subtilis and S. aureus; 10 and 20 µg/ml for E. coli and P. aeruginosa, respectively. For determining the effect of AgNPs on biofilm formation under in vitro conditions, MIC and subMICs were studied on P. aeruginosa and S. aureus biofilms by using microplate biofilm assay. Treatment of the AgNPs resulted in a decrease in the biofilm formation of S. aureus and P. aeruginosa as 26.52 and 25.50%, respectively. As a result of this study, it can be suggested that actinobacterially synthesised AgNPs have an effective potential to be used for pharmaceutical applications against multi‐resistant microorganisms.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, biomedical materials, microorganismsOther keywords: antimicrobial potentials, antibiofilm potentials, silver nanoparticles, antimicrobial activity, antibiofilm activity, Streptomyces griseorubens AU2, disc diffusion, microdilution method, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, nanoparticle minimum inhibitory concentration, nanoparticle minimum lethal concentration, biofilm formation, in vitro conditions, microplate biofilm assay, pharmaceutical applications, multiresistant microorganisms, Ag     

Efficacy of a levulinic Acid plus sodium dodecyl sulfate-based sanitizer on inactivation of human norovirus surrogates

Human noroviruses are the most common etiologic agent of foodborne illness in the United States. The inability to culture human noroviruses in the laboratory necessitates the use of surrogate viruses such as murine norovirus (MNV-1) and feline calicivirus (FCV) for inactivation studies. In this study, a novel sanitizer of organic acid (levulinic acid) plus the anionic detergent sodium dodecyl sulfate (SDS) was evaluated. Viruses were treated with levulinic acid (0.5 to 5%), SDS (0.05 to 2%), or combinations of levulinic acid plus SDS (1:10 solution of virus to sanitizer). MNV-1 inoculated onto stainless steel also was treated with a 5% levulinic acid plus 2% SDS liquid or foaming solution. Log reductions of viruses were determined with a plaque assay. Neither levulinic acid nor SDS alone were capable of inactivating MNV-1 or FCV, resulting in a ≤0.51-log reduction of the infectious virus titer. However, the combination of 0.5% levulinic acid plus 0.5% SDS inactivated both surrogates by 3 to 4.21 log PFU/ml after 1 min of exposure. Similarly, MNV-1 inoculated onto stainless steel was reduced by >1.50 log PFU/ml after 1 min and by >3.3 log PFU/ml after 5 min of exposure to a liquid or foaming solution of 5% levulinic acid plus 2% SDS. The presence of organic matter (up to 10%) in the virus inoculum did not significantly affect sanitizer efficacy. The fact that both of the active sanitizer ingredients are generally recognized as safe to use as food additives by the U.S. Food and Drug Administration further extends its potential in mitigating foodborne disease.