Chronic obstructive pulmonary disease in patients with end‐stage kidney disease on hemodialysis

The objectives of this study were to assess the prevalence of chronic obstructive pulmonary disease (COPD) in hemodialysis patients with spirometry and to examine the effects of fluid removal by hemodialysis on lung volumes. Patients ≥18 years at two Danish hemodialysis centers were included. Forced expiratory volume in one second (FEV₁), forced vital capacity (FVC), and FEV₁/FVC ratio were measured with spirometry before and after hemodialysis. The diagnosis of COPD was based on both the GOLD criteria and the lower limit of normal criteria. There were 372 patients in treatment at the two centers, 255 patients (69%) completed spirometry before dialysis and 242 of these (65%) repeated the test after. In the initial test, 117 subjects (46%) had airflow limitation indicative of COPD with GOLD criteria and 103 subjects (40.4%) with lower limit of normal criteria; COPD was previously diagnosed in 24 patients (9%). Mean FVC and FEV₁ decreased mildly after dialysis (FVC: 2.84 to 2.79 L, P < 0.01. FEV₁: 1.97 to 1.93 L, P < 0.01) Hemodialysis did not affect the FEV₁/FVC ratio or number of subjects with airflow limitation indicative of COPD (113 vs. 120, P = 0.324; n = 242). COPD is a frequent and underdiagnosed comorbidity in patients on chronic hemodialysis. Spirometry should be considered in all patients on dialysis in order to address dyspnea adequately. Hemodialysis induced a small fall in mean FEV₁ and FVC, which was more pronounced in patients with little or no fluid removal, but the FEV₁/FVC ratio and the number of subjects with airflow limitation indicative of COPD were not affected by dialysis.     

Effects of Different Retention Parameter Estimation Methods on the Prediction of Surface Runoff Using the SCS Curve Number Method

Quantifying different hydrological components is an initial step for sustainable water resources planning and management. One rising concern is the conflict between the environment, hydropower and agriculture mainly in lowland areas where a large share of the base flows need to be abstracted. The Soil and Water Assessment Tool (SWAT) model was used to understand the hydrological processes of the Upper Awash River Basin with the emphasis on analyzing the different options for surface runoff generation using the Soil Conservation Service (SCS) Curve Number (CN) method. In this study, SWAT was applied incorporating two methods for estimating the retention parameter (S) for the SCS-CN method. The first allowed S to vary with soil profile moisture content (SM method) and the second allowed S to vary with accumulated plant evapotranspiration (PT method). Hydrograph comparison indicated that the PT method was better in simulating peak flows while the SM method was better in simulating the low flows. While the predicted stream flow hydrographs showed an agreement between the two methods, the simulated annual water balance indicated a disagreement in quantifying the different hydrological components. After evapotranspiration, base flow was the dominant component simulated in the SM method whereas surface runoff was the foremost in the PT method simulation. The analysis indicated that care must be taken when selecting an appropriate tool for quantifying hydrologic system to be used for decision making especially for un-gauged catchments where validation of model results is not possible.     

Artificial Neural Network modeling of a hydrogen dual fueled diesel engine characteristics: An experiment approach

The rapid growth of vehicular pollution; mostly running on the diesel engine, emissions emerging are the concerns of the day. Owing to clean burn characteristics features, Hydrogen (H₂) as a fuel is the paradigm of the researcher. Extensive research presented in the literature on H₂ dual fueled diesel engine reveals, the significant role of H₂ in reducing emissions and enhancing the performance of a dual fueled diesel engine. With meager qualitative experiment data, the feasibility to develop an efficient Artificial Neural Network (ANN) model is investigated, the developed model can be utilized as a tool to investigate the H₂ dual fueled diesel engine further. In the process of developing an ANN model, engine load and H₂ flow rate are varied to register performance and emission characteristics. The creditability of the experiment is ascertained with uncertainty analysis of measurable and computed parameters. Leave-out-one method is adopted with 16 data sets; seven training algorithms are explored with eight transfer function combinations to evolve a competent ANN model. The efficacy of the developed model is adjudged with standard benchmark statistic indices. ANN model trained with Broyden, Fletcher, Goldfarb, & Shanno (BFGS) quasi-Newton backpropagation (trainbfg) stand out the best among other algorithms with regression coefficient ranging between 0.9869 and 0.9996.     

Inversion with regularization for the retrieval of tropospheric aerosol parameters from multiwavelength lidar sounding

We present an inversion algorithm for the retrieval of particle size distribution parameters, i.e., mean (effective) radius, number, surface area, and volume concentration, and complex refractive index from multiwavelength lidar data. In contrast to the classical Tikhonov method, which accepts only that solution for which the discrepancy reaches its global minimum, in our algorithm we perform the averaging of solutions in the vicinity of this minimum. This averaging stabilizes the underlying ill-posed inverse problem, particularly with respect to the retrieval of number concentration. Results show that, for typical tropospheric particles and 10% error in the optical data, the mean radius could be retrieved to better than 20% from a lidar on the basis of a Nd:YAG laser, which provides a combination of backscatter coefficients at 355, 532, and 1064 nm and extinction coefficients at 355 and 532 nm. The accuracy is improved if the lidar is also equipped with a hydrogen Raman shifter. In this case two additional backscatter coefficients at 416 and 683 nm are available. The combination of two extinction coefficients and five backscatter coefficients then allows one to retrieve not only averaged aerosol parameters but also the size distribution function. There was acceptable agreement between physical particle properties obtained from the evaluation of multiwavelength lidar data taken during the Lindenberg Aerosol Characterization Experiment in 1998 (LACE 98) and in situ data, which were taken aboard aircraft.     

Assessing road investments: accessibility changes,cost benefit and production effects

Infrastructure investment projects and programmes are generally evaluated by comparing project costs with pertinent benefits. In this paper a series of alternative national road investment programmes in Sweden are examined. Each programme is assessed in terms of expected time savings and reduced accident rates. In addition we make use of a general production function with regionally specific accessibility characteristics as arguments. With this approach, improved accessibility implies an increase of the production potential. The paper compares the value of these production effects with the value of time savings and other benefits in a standard CB-calculation. In the comparisons more than 50 alternative national investment programmes are assessed, and their degree of consistency is estimated.An earlier version of this paper was presented at the European RSA-conference in Moscow, August 1993 and has benefitted from comments during the conference. The authors are grateful for suggestions rendered by two anonymous referees. We also wish to thank R. Jonsson, G. Lindberg and L.-G. Mattsson. Supply of data and research funds from the National Road Administration is acknowledged.     

Polychlorinated naphthalenes in Swedish background air

Polychlorinated naphthalenes (PCNs) with four to eight chlorines were studied in air collected at two background stations in Sweden, one southerly and one northerly. Air was sampled with a high-volume sampler, and gas-phase adsorbents and filters were analyzed separately. The sum of TeCNs to HxCNs in the gaseous phase ranged between 1 and 10 pg/m3 with significantly higher concentrations at the southern location Hoburgen. HpCNs and OCN were below the detection limit. The highest concentrations were found in two samples from Hoburgen with the air masses coming from SW and W and during warm weather (+11 degrees C). The lowest concentration was found in a sample from the northern location Ammarn?s at cold weather (-22 degrees C) when the air came from the east. A correlation was found between logP and 1/T indicating that temperature has a larger effect than location on the concentration in the gas phase. The TeCNs constituted 50-75% in the gaseous phase. In most filter samples TeCNs and PeCNs were below the limit of quantitation. PUF samples with air trajectories from W to NE had relatively higher concentrations of late eluting TeCNs and PeCNs, while in samples with winds from SE to S the early eluting congeners dominated. Samples with early eluting congeners were mainly collected at lower temperature. TriCNs constituted the dominant homologue group both in the gaseous and particulate phase of air samples as well as in bulk deposition from a rural monitoring station south of Stockholm. The octanol-air partition coefficient described the gas/particle interaction well for samples collected at temperatures down to -8 degrees C.     

Direct electron transfer of cytochrome P450 2B4 at electrodes modified with nonionic detergent and colloidal clay nanoparticles

A method for construction of biosensors with membranous cytochrome P450 isoenzymes was developed based on clay/detergent/protein mixed films. Thin films of sodium montmorillonite colloid with incorporated cytochrome P450 2B4 (CYP2B4) with nonionic detergent were prepared on glassy carbon electrodes. The modified electrodes were electrochemically characterized, and bioelectrocatalytic reactions were followed. CYP2B4 can be reduced fast on clay-modified glassy carbon electrodes in the presence of the nonionic detergent Tween 80. In anaerobic solutions, reversible oxidation and reduction is obtained with a formal potential between -0.292 and -0.305 V vs Ag/AgCl 1 M KCl depending on the preparation of the biosensor. In air-saturated solution, bioelectrocatalytic reduction currents can be obtained with the CYP2B4-modified electrode on addition of typical substrates such as aminopyrine and benzphetamine. This reaction was suppressed when methyrapone, an inhibitor of P450 reactions, was present. Measurement of product formation also indicates the bioelectrocatalysis by CYP2B4.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 3. Raman lidar algorithm for aerosol extinction, backscatter, and lidar ratio

An intercomparison of the algorithms used to retrieve aerosol extinction and backscatter starting from Raman lidar signals has been performed by 11 groups of lidar scientists involved in the European Aerosol Research Lidar Network (EARLINET). This intercomparison is part of an extended quality assurance program performed on aerosol lidars in the EARLINET. Lidar instruments and aerosol backscatter algorithms were tested separately. The Raman lidar algorithms were tested by use of synthetic lidar data, simulated at 355, 532, 386, and 607 nm, with realistic experimental and atmospheric conditions taken into account. The intercomparison demonstrates that the data-handling procedures used by all the lidar groups provide satisfactory results. Extinction profiles show mean deviations from the correct solution within 10% in the planetary boundary layer (PBL), and backscatter profiles, retrieved by use of algorithms based on the combined Raman elastic-backscatter lidar technique, show mean deviations from solutions within 20% up to 2 km. The intercomparison was also carried out for the lidar ratio and produced profiles that show a mean deviation from the solution within 20% in the PBL. The mean value of this parameter was also calculated within a lofted aerosol layer at higher altitudes that is representative of typical layers related to special events such as Saharan dust outbreaks, forest fires, and volcanic eruptions. Here deviations were within 15%.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.