Detailed Molecular Structure Modeling – A Path Forward to Designing Application Properties of ldPE

Summary: This paper describes a step on the ambitious aim to “design” application properties of ldPE by first simulating the detailed molecular structure of a high‐pressure tubular reactor product. The reactor of a certain configuration produces under well‐defined operating conditions. The next step is to correlate the structure with the application properties. Finally, the sequence will be reversed in order to deduce the operating conditions, which lead to the desired product quality. Two‐dimensional distributions, in molecular weight and branching frequency, as well a two compartment models with a core and a shell stream were simulated and compared with experimental results. Therefore, CFD simulations were carried out to discretize the reaction medium. Samples were taken from both pilot and commercial plants. The TREF‐SEC analytical method was successfully applied in order to measure the microscopic structure of the material. The tremendous numerical problems were solved with the help of the software PREDICI .

Detailed MWD for a pilot scale reactor product.     

Versuchsplanerische Untersuchung der Umesterung von Sojaöl mit Ethanol im Mikroreaktor

Base‐catalyzed transesterification of fats and oils with primary alcohols in discontinuous operation is an established batch process for the biodiesel production. However, the application of microreaction technology and continuous flow process lead to an increase of process intensification. The ethanol/soy bean oil ratio at low flow rates as well as the reactor geometry have the most evident effects on the fatty acid ethyl ester yield of KOH‐catalyzed ethanolysis of soy bean oil in microreactors. The influence of the catalyst concentration is of a lower importance.     

Optimized Hemolysin Type 1 Secretion System in Escherichia coli by Directed Evolution of the Hly Enhancer Fragment and Including a Terminator Region

Type 1 secretion systems (T1SS) have a relatively simple architecture compared to other classes of secretion systems and therefore, are attractive to be optimized by protein engineering. Here, we report a KnowVolution campaign for the hemolysin (Hly) enhancer fragment, an untranslated region upstream of the hlyA gene, of the hemolysin T1SS of Escherichia coli to enhance its secretion efficiency. The best performing variant of the Hly enhancer fragment contained five nucleotide mutations at five positions (A30U, A36U, A54G, A81U, and A116U) resulted in a 2-fold increase in the secretion level of a model lipase fused to the secretion carrier HlyA1. Computational analysis suggested that altered affinity to the generated enhancer fragment towards the S1 ribosomal protein contributes to the enhanced secretion levels. Furthermore, we demonstrate that involving a native terminator region along with the generated Hly enhancer fragment increased the secretion levels of the Hly system up to 5-fold.     

Facile preparation of water-soluble fluorescent gold nanoclusters for cellular imaging applications

We report a facile strategy to synthesize water-soluble, fluorescent gold nanoclusters (AuNCs) in one step by using a mild reductant, tetrakis(hydroxymethyl)phosphonium chloride (THPC). A zwitterionic functional ligand, D-penicillamine (DPA), as a capping agent endowed the AuNCs with excellent stability in aqueous solvent over the physiologically relevant pH range. The DPA-capped AuNCs displayed excitation and emission bands at 400 and 610 nm, respectively; the fluorescence quantum yield was 1.3%. The effect of borohydride reduction on the optical spectra and X-ray photoelectron spectroscopy (XPS) results indicated that the AuNC luminescence is closely related to the presence of Au(I) on their surfaces. In a first optical imaging application, we studied internalization of the AuNCs by live HeLa cells using confocal microscopy with two-photon excitation. A cell viability assay revealed good biocompatibility of these AuNCs. Our studies demonstrate a great potential of DPA-stabilized AuNCs as fluorescent nanoprobes in bioimaging and related applications.     

Effective reduction of AlN defect luminescence by fluorine implantation

We report on the effective reduction of AlN host lattice defect cathodoluminescence by high dose ion implantation of light elements such as fluorine as well as chlorine and neon with peak concentrations of 1 at.%. In order to distinguish between luminescence suppression in the visible to luminescence quenching due to radiation damage, all samples were additionally implanted with europium at fluences of 1 · 10¹³ ions/cm². After annealing the samples at 1373 K under vacuum conditions cathodoluminescence spectra were recorded at room temperature (300 K) and at cryogenic temperature (12 K). These investigations reveal that different light ion species have different influences on the defect luminescence of the AlN host lattice which is likely due to selective passivation of these defects. The best ratio of defect luminescence suppression to radiation damage induced luminescence quenching is achieved in the case of fluorine co-doping.     

Magnetite core-shell nano-composites with chlorine functionality: preparation by miniemulsion polymerization and characterization

Magnetic composite particles with a magnetic core consisting of superparamagnetic iron oxide and a cover layer of hydrophobic polyvinylbenzylchloride are described. The magnetite was prepared by precipitation starting with mixed iron II and iron III salts and coating of the solid with oleic acid. The coating is conducted via the liquid–liquid phase transfer. Thereby oleic acid adsorbed on the magnetite surface. In a second step the oleic acid treated magnetite was coated with polyvinylbenzylchloride in a miniemulsion polymerization to get a protective layer. The obtained magnetite core-shell nano-composites with chlorine functionality were characterized by different methods: particle size measurement, acid treatment, iron content, morphology and elemental profiles across the composite particles diameter. The test result reveals the binding of the iron oxide inside the composites which can be also recognize in TEM pictures.     

Hydrogen sensor based on a graphene – palladium nanocomposite

A composite material was prepared from graphene and palladium nanoparticles (PdNP) by layer-by-layer deposition on gold electrodes. The material was characterized by absorption spectroscopy, scanning electron microscopy, Raman spectroscopy and surface plasmon resonance. Cyclic voltammetry demonstrated the presence of electrocatalytic centers in the palladium decorated graphene. This material can serve as a sensor material for hydrogen at levels from 0.5 to 1% in synthetic air. Pure graphene is poorly sensitive to hydrogen, but incorporation of PdNPs increases its sensitivity by more than an order of magnitude. The effects of hydrogen, nitrogen dioxide and humidity were studied. Sensor regeneration is accelerated in humid air. The sensitivity of the nanocomposite depends on the number of bilayers of graphene–PdNPs.     

Beurteilungskriterien für sicherheitstechnische Prüfungen

Methods are presented which enable one to assess and compare the hazard potentials of different technical installations without the necessity of a detailed technical plant analysis. The basis is the energy content of the installation. In the case that energies with different impact mechanisms, e.g., pressure and heat, are to be compared, the probit method is used. In addition, the expected frequency of occurrence is included in the assessment. This is an approach which is already used in neighboring countries. It is foreseeable that it will gain importance in Germany as well. In the case of elevators the predator‐prey model is used to analyze the time series of accidents. The influence of errors in inspection and maintenance is put into evidence by comparison with the SIL classification.     

Combinatorial synthesis of new cationic lipids and high-throughput screening of their transfection properties

Here we describe the first synthesis-screening approach for the identification and optimization of new cationic lipids for gene transfer in various cell lines. Combinatorial solid-phase chemistry was used to synthesize a library of new cationic lipids based on 3-methylamino-1,2-dihydroxypropane as the polar, cationic lipid part. As the nonpolar lipid part, different hydrocarbon chains were bound to the amino group of the scaffold and the amino group was further methylated to afford constantly cationic lipids. Lipids were synthesized in both configurations and as racemates, and the counter ions were also varied. By using a fully automated transfection screening method and COS-7 cells, the cationic lipid N,N-ditetradecyl-N-methyl-amino-2,3-propanediol (KL-1-14) was identified as a candidate lipid for the development of an improved transfection reagent. Screening the transfection properties of KL-1-14 in numerous combinations with the helper lipids dioleoylphosphatidylethanolamine (DOPE) and cholesterol (Chol) revealed that Chol is the most suitable helper lipid and the best KL-1-14/Chol ratio is 0.5-0.7. Compared to the standard transfection lipid N-[1-(2,3-dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl sulfate (DOTAP), transfection efficiency was improved by a factor of about 40. Furthermore, by using R- and S-configured KL-1-14, it could be shown that the configuration of the lipids had no significant influence on its transfection efficiency. The highest transfection efficiencies were achieved with chloride as the counter ion. The new lipofection reagent was further tested to transfect the cell lines MDA-MB-468, MCF-7, MDCK-C7, and primary dentritic cells (DC), which are important for the development of new anticancer gene therapy strategies. Even in these cells, KL-1-14/Chol (1:0.6) had improved transfection efficiencies, which were about two to four times higher than for DOTAP.