Preparation and structural study of Mg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiO<Subscript>3</Subscript> ceramics and their dielectric properties from 1 Hz to 7.7 GHz

A series of Mg_1?x Zn _x TiO₃, x = 0–0.5 (MZT0–MZT0.5) ceramics was synthesised and characterised. The dielectric properties of the samples in the frequency range of 1 Hz–7.7 GHz were explored using three different methods: a contacting electrode method, a parallel-plate method and a perturbed resonator method. The electrical properties in the space charge and dipolar polarisation frequency ranges are discussed in relation to the phase composition and microstructure data. Differences in the zinc substitution divided the dielectrics into two groups, namely MZT0–MZT0.2 and MZT0.3–MZT0.5, each with different amount of a main Mg_1?x Zn _x TiO₃ solid solution phase and a secondary solid solution phase. Zinc substitution promoted the density of the ceramics, improved the purity of the main phase and increased the permittivity for frequencies up to 10⁸ Hz, but reduced the permittivity in the microwave range. In the MZT0.3–MZT0.5 samples, for frequencies less than 1 MHz the quality (Q × f) factors were lower and log σ _a.c, the AC conductivity, was higher than for the MZT0–MZT0.2 samples. Above 10 MHz, the (Q × f) factors and log σ _a.c of the two groups were similar.     

Pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy: outcome and prognostic factors

STUDY OBJECTIVE: To determine predictors of mortality from pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy, and the significance of those factors related to the underlying malignancy and its therapy as well as of those related to the severity of the illness associated with pulmonary infiltrates. DESIGN: A historical cohort study. SETTING: A university teaching hospital and tertiary referral center. PATIENTS AND METHODS: Overall, 53 patients with neutropenia during chemotherapy and with first episodes of pulmonary infiltrates during a 4-year period were studied. Prognostic analysis included 38 variables. Multivariate analyses were performed by logistic regression. RESULTS: The survival rate from pneumonia was 57% (30/53). The following eight parameters were significantly associated with death in univariate analysis: comorbidity present; development of "late" pulmonary infiltrates (> or = 14 days after hospital admission); heart rate > or = 100 beats/min; a ratio heart rate/systolic blood pressure (HR/SBP) > or = 1.2; urea nitrogen > 7 mmol/L; radiographic score > or = 3; neutropenia < 1.0x10(9)/L at the treatment end point; and failed complete remission. In a multivariate model including only parameters available at diagnosis of pulmonary infiltrates, the presence of a ratio HR/SBP > or = 1.2 and of a radiographic score > or = 3 remained independently associated with death. In a second model also including the evolutionary parameter neutropenia < or = 1.0x10(9)/L at the treatment end point, both parameters remained significant together with neutropenia <1.0x 10(9)/L at the treatment end point. The presence of a ratio HR/SBP > or = 1.2 was a strong marker of early death. CONCLUSION: Both therapy- and malignancy-associated neutropenia as well as the severity of illness associated with pulmonary infiltrates are independent prognostic factors. Patients with a ratio HR/SBP > or = 1.2 at diagnosis of pulmonary infiltrates suffer from potentially reversible acute illness, are at risk for early death and, therefore, may be appropriate candidates for treatment in an ICU.     

The artificial heart and neuromonitoring? Technical and clinical aspects

There is a steady progress in the development of artificial heart and circulatory assist devices. There is also no doubt that further advances in energy systems, materials, and electronics will provide for smaller and more reliable electrically driven blood pumps, but the present engineering design appears to be adequate to provide devices satisfactory for initial clinical use. Due to problems in the availability of suitable donor hearts, the concept of replacing the natural heart with an artificial heart as a "bridge to transplantation" has gained attention in recent years. The present paper shows technical and clinical aspects of multivariable electrophysiologic neuromonitoring in a patient with an artificial heart assist device in the intensive care unit. The data (EEG, 40 Hz brain oscillations, brainstem auditory- and somatosensory evoked potentials) are discussed with respect to the influence of the artificial heart on their quality and reliability. Reasons for artifacts and problems of interpretation are shown.     

Thin and thick YBCO films grown by MOCVD processes. Study of the angular magnetic field dependence of current transport properties

Thin and thick YBCO Films have been grown by Aerosol Assisted as well as by thermal MOCVD. The Aerosol Assisted MOCVD technique allows the growth of YBCO films from a single liquid source at deposition rates of up to 10m/h.Transport measurements (I-V) on etched microbridges using a single pulse technique have been performed. The angular magnetic field dependence J_c() of the critical current density from T_c down to 50 K has been measured. Transport properties are reported and discussed with respect to the microstructural features as determined by X-ray diffraction and electron microscopy.     

Dynamical information fusion of heterogeneous sensors for 3D tracking using particle swarm optimization

This paper presents a new method for three dimensional object tracking by fusing information from stereo vision and stereo audio. From the audio data, directional information about an object is extracted by the Generalized Cross Correlation (GCC) and the object’s position in the video data is detected using the Continuously Adaptive Mean shift (CAMshift) method. The obtained localization estimates combined with confidence measurements are then fused to track an object utilizing Particle Swarm Optimization (PSO). In our approach the particles move in the 3D space and iteratively evaluate their current position with regard to the localization estimates of the audio and video module and their confidences, which facilitates the direct determination of the object’s three dimensional position. This technique has low computational complexity and its tracking performance is independent of any kind of model, statistics, or assumptions, contrary to classical methods. The introduction of confidence measurements further increases the robustness and reliability of the entire tracking system and allows an adaptive and dynamical information fusion of heterogenous sensor information.     

Maximum likelihood analysis of algorithms and data structures

We present a new approach for an average-case analysis of algorithms and data structures that supports a non-uniform distribution of the inputs and is based on the maximum likelihood training of stochastic grammars. The approach is exemplified by an analysis of the expected size of binary tries as well as by three sorting algorithms and it is compared to the known results that were obtained by traditional techniques. Investigating traditional settings like the random permutation model, we rediscover well-known results formerly derived by pure analytic methods; changing to biased data yields original results. All but one step of our analysis can be automated on top of a computer-algebra system. Thus our new approach can reduce the effort required for an average-case analysis, allowing for the consideration of realistic input distributions with unknown distribution functions at the same time. As a by-product, our approach yields an easy way to generate random combinatorial objects according to various probability distributions.     

Exploring indicators for quantifying surface urban heat islands of European cities with MODIS land surface temperatures

The term urban heat island describes the phenomenon of altered temperatures in urban areas compared to their rural hinterlands. A surface urban heat island encompasses the patterns of land surface temperatures in urban areas. The classical indicator to describe a surface urban heat island is the difference between urban and rural surface temperatures. However, several other indicators for this purpose have been suggested in the literature. In this study, we compared the eleven different indicators for quantifying surface urban heat islands that were most frequently used in recent publications on remote sensing-based urban heat island assessments. The dataset used here consists of 263 European cities with monthly mean temperatures from MODIS data products for July 2002, January 2003 and July 2003. We found that (i) the indicators individually reveal diurnal and seasonal patterns but show rather low correlations over time, and (ii) for single points in time, the different indicators show only weak correlations, although they are supposed to quantify the same phenomenon. Differentiating cities according to thermal climate zones increased the relationships between the indicators. Thus, we can identify temporal aspects and indicator selection as important factors determining the estimation of urban heat islands. We conclude that research should take into account the differences and instabilities of the indicators chosen for quantifying surface urban heat islands and should use several indicators in parallel for describing the surface urban heat island of a city.     

Solving Third Order Differential Equations with Maximal Symmetry Group

The largest group of Lie symmetries that a third-order ordinary differential equation (ode) may allow has seven parameters. Equations sharing this property belong to a single equivalence class with a canonical representative v ^′′′(u)=0. Due to this simple canonical form, any equation belonging to this equivalence class may be identified in terms of certain constraints for its coefficients. Furthermore a set of equations for the transformation functions to canonical form may be set up for which large classes of solutions may be determined algorithmically. Based on these steps a solution algorithm is described for any equation with this symmetry type which resembles a similar scheme for second order equations with projective symmetry group. Received March 9, 2000; revised June 8, 2000