New ultra high molecular weight acrylic processing aids for rigid PVC foaming

Foaming of rigid polyvinyl chloride (PVC) is studied as a function of high molecular weight acrylic processing aids. The industrial process to evaluate quality of foam is discussed in detail. The role of acrylic processing aids to improve melt strength and hence foaming of PVC is explained. It is demonstrated that increase in molecular weight of acrylic processing aids increases its effectiveness. It is found that ultra-high molecular weight processing aids is 25%–30% more efficient than relatively lower, but still high, molecular weight acrylic processing aids. The higher molecular weight processing aids provided comparable foaming performance at lower loading levels. Foaming reduced the density of PVC compounds to 0.32–0.34 g/cm³. More than 1000% expansion is achieved in the melt extrusion process using a chemical blowing agent. Fusion characteristics are also studied. Fusion times for initial fusion peaks are in the range of 42–44 s while the fusion times of the second fusion peaks are in the range of 74–94 s. The higher molecular weight processing aids maintained fusion characteristics of PVC compounds, warranting no significant changes in commercial process.     

Morphology biased pharmacological and mechanical properties of nanosized block copolymers of PNIPAM with polyethylene oxide and polyaminoacids in presence of polycaprolactone

This work targets to develop amphiphilic self-assembled PEO-b-PAAs-b-PNIPAM and PEO-b-PAAs-b-PNIPAM@PCL nanosized block copolymers (NBCPs) of poly N-isopropyl acrylamide (PNIPAM) with polyethylene oxide (PEO), and poly amino acids (PAAs) with and without polycaprolactone (PCL) via ring-opening and condensation polymerization methods. The interesting ring necklace and petunia bell-shaped flower-like morphology play an important role in both mechanical behavior and pharmacological actions. The PEO-b-PAAs-b-PNIPAM@PCL NBCP exhibits a notable antibacterial activity against gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) with ZOI of 20 ± 4 mm and 18 ± 3 mm, respectively, with MIC 250 μg/ml. The mechanical properties of the NBCPs are measured at room temperature. The PEO-b-PAAs-b-PNIPAM@PCL NBCP possesses a higher value in each case compared to the neat polymer with the UTS 1.4651 MPa, Y 0.0050 MPa, Tensile strength at yield (1.4048 MPa), TS at break (1.4640 MPa), % elongation at yield (23.5%), elongation % at break (124%) and proportional limit (1.0082 MPa at 8%), respectively. With the improved mechanical strength, effective antibacterial activities along with sustainable drug release rate, the designed material can be used as a potential material for different biomedical applications.     

Comparative Measurement of Indentation Fracture Toughness with Berkovich and Vickers Indenters

Measurements of the load dependence of the radial crack size with Vickers and Berkovich indenters are compared for a range of materials. It is found that the extent of radial cracks was slightly larger for the Berkovich than for the Vickers indenter. The observations reveal that cracks from a Berkovich indenter are best described by an expression developed by Laugier combined with a modification proposed by Ouchterlony to account for the number of radial cracks. It was also found that the Berkovich indenter, which offers advantages for ultramicroindentation, gave more consistent toughness values at lower loads than a Vickers indenter.     

Nano boron nitride laminated poly(ethyl methacrylate)/poly(vinyl alcohol) composite films imprinted with silver nanoparticles as gas barrier and bacteria resistant packaging materials

Herein, nano boron nitride (BN) laminated poly(ethyl methacrylate) (PEMA)/poly(vinyl alcohol) (PVA) nanocomposite films are fabricated by using a simple in situ polymerization technique with incorporation of silver nanoparticles (Ag NPs). Structural investigations of PEMA/PVA/Ag@BN nanocomposite thin films are carried out by Fourier-transform infrared spectroscopy, dynamic light scattering, X-ray diffraction analysis, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, and mass spectrometry. The change in morphology of PEMA/PVA matrix due to the reinforcement of BN platelets are identified by electron microscopic studies. The unique tortuous paths are achieved by the dispersion of BN platelets by which gas penetration is restricted with enhancing the barrier properties of the material by 6.5 folds at 5 wt% BN content as compared with neat PEMA/PVA. Acid and alkali resistant along with biodegradability behavior of as-synthesized nanocomposites are studied. From limiting oxygen index (LOI) results, it is found that the prepared materials are fire retardant in nature owing to effective reinforcement of BN layers. Antibacterial activities of PEMA/PVA/Ag@BN nanocomposite are studied by Xanthomonas citri or axonopodis pv. Citri, Escherichia coli, and Xanthomonas oryzae pv. Oryzae because of Ag NPs reinforcement. The substantial improvements in gas barrier, fire retardant, and antibacterial properties enable the materials for packaging application.     

Dispersion of multiwalled carbon nanotubes in polyacrylonitrile‐co‐starch copolymer matrix for enhancement of electrical,thermal, and gas barrier properties

Nanomaterials gained great importance on account of their wide range of applications in many areas. Carbon nanotubes (CNTs) exhibit exceptional electrical, thermal, gas barrier, and tensile properties and can therefore be used for the development of a new generation of composite materials. Functionalized multiwalled carbon nanotubes (MWCNTs) reinforced Polyacrylonitrile‐co‐starch nanocomposites were prepared by in situ polymerization technique. The structural property of PAN‐co‐starch/MWCNT nanocomposites was studied by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The conductivity, tensile strength, and thermal properties of nanocomposites were measured as a function of MWCNT concentrations. The thermal stability, conductivity, and tensile strength of PAN‐co‐starch/MWCNT nanocomposites were improved with increasing concentration of MWCNTs. Oxygen barrier property of PAN‐co‐starch/MWCNT nanocomposites was calculated and it was found that, the property was reduced substantially with increase of MWCNTs proportion. The synthesized PAN‐co‐starch/MWCNT nanocomposites may used for electrostatically dissipative materials, aerospace or sporting goods, and electronic materials. © 2013 Society of Plastics Engineers     

Performance Analysis of Ferroelectric GAA MOSFET with Metal Grain Work Function Variability

Silicon - This work represents a unique GAA MOSFET with metal work-function variations (WFVs) and ferroelectric material as dielectric. A random distribution of metal grain (TiN) with grain size...     

Performance Analysis of Gate-Stack Dual-Material DG MOSFET Using Work-Function Modulation Technique for Lower Technology Nodes

Silicon - Short channel effects (SCEs) along with mobility degradation has a great impact on CMOS technology below 100 nm. These effects can be overcome by using gate and channel...     

Effect of Amine Additive for the Synthesis of Cadmium Selenide Quantum Dots in a Microreactor

The effect of octylamine flow rate on the structure and morphology of CdSe quantum dots synthesized in a microreactor was studied. The flow rate of octylamine was varied from 0.005 ml/min to 0.030 ml/min, and the optical properties of the synthesized particles were analyzed by UV–vis and photoluminescence spectroscopy. The particle size of the quantum dots was found to increase with an increasing octylamine flow rate. Further, UV–vis and photoluminescence bands were found to be red‐shifted with an increasing flow rate. We determined that, by controlling octylamine flow rate, the particle size of the quantum dots could be controlled. This method will help to determine the optimal octylamine flow conditions for synthesizing nanoparticles for use in a diverse range of applications.     

Ultrasound aided extrusion process for preparation of polyolefin–clay nanocomposites

A continuous ultrasound assisted process using a single screw compounding extruder with an ultrasonic attachment was developed to prepare polyolefin/clay nanocomposites. High‐density polyethylene and isotactic polypropylene were compared. The feed rate that controls the residence time of the polymer in the ultrasonic treatment zone was varied. Die pressure and power consumption were measured. Rheological properties, morphology, and mechanical properties of the untreated and ultrasonically treated nanocomposites were studied. Similarities and differences of obtained nanocomposites are discussed based on their properties and structural characteristics. The modified Halpin‐Tsai theory of composite materials has been employed in order to predict the effect of incomplete exfoliation of clay platelets on the Young's modulus of the nanocomposites. A good agreement between experimental and theoretical data has been observed when reduction of the reinforcement efficiency of clay had been incorporated through the reduced aspect ratio of elementary clay platelets. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers