Potential of Ozonated Water at Different Temperatures to Improve Safety and Shelf-Life of Fresh Cut Lettuce

The present study was carried out to determine the effect of ozonated water (2 mg L^?1) at different temperatures (4 °C and 15 °C) on the microbiological, color and sensory properties of lettuce. Cold ozone treatment (4 °C) significantly reduced the natural background microflora of lettuce. Salmonella Typhimurium and Escherichia coli inoculated on lettuce samples were insignificantly influenced by the temperature of water. During storage period at +4 °C for 14 days, the highest quality was observed from the samples treated with cold ozonated water. Ozone treatments did not affect the color properties and sensory quality of lettuce samples.     

Automatic Contrast Enhancement by Transfer Function Modification

In this study, we propose an automatic contrast enhancement method based on transfer function modification (TFM) by histogram equalization. Previous histogram‐based global contrast enhancement techniques employ histogram modification, whereas we propose a direct TFM technique that considers the mean brightness of an image during contrast enhancement. The mean point shifting method using a transfer function is proposed to preserve the mean brightness of an image. In addition, the linearization of transfer function technique, which has a histogram flattening effect, is designed to reduce visual artifacts. An attenuation factor is automatically determined using the maximum value of the probability density function in an image to control its rate of contrast. A new quantitative measurement method called sparsity of a histogram is proposed to obtain a better objective comparison relative to previous global contrast enhancement methods. According to our experimental results, we demonstrated the performance of our proposed method based on generalized measures and the newly proposed measurement.     

Optimum design of laminated composite plates to maximize buckling load using MFD method

This paper presents optimal design of simply supported laminated composite plates subject to given in-plane static loads for which the critical failure mode is buckling. The objective function is to maximize the buckling load capacity of laminated plates and the fiber orientation is considered as design variable. The first-order shear deformation theory is used for the finite element analysis. In this paper, the effects of bending–twisting coupling are also included for the buckling optimization. The modified feasible direction method is used as an optimization method. Also, computer programs are coded in MATLAB and Golden Section method is adapted in this program for the optimal design of laminated plates for maximum buckling load. The effect of width-to-thickness ratio, aspect ratio, number of layers, material anisotropy, load ratios (N_y/N_x), uncertainties in material properties and functionally graded materials on the results is investigated and compared.     

Information Regularized Sensor Fusion: Application to Localization With Distributed Motion Sensors

We propose the information regularization principle for fusing information from sets of identical sensors observing a target phenomenon. The principle basically proposes an importance-weighting scheme for each sensor measurement based on the mutual information based pairwise statistical similarity matrix between sensors. The principle is applied to maximum likelihood estimation and particle filter based state estimation. A demonstration of the proposed regularization scheme in centralized data fusion of dense motion detector networks for target tracking is provided. Simulations confirm that the introduction of information regularization significantly improves localization accuracy of both maximum likelihood and particle filter approaches compared to their baseline implementations. Outlier detection and sensor failure detection capabilities, as well as possible extensions of the principle to decentralized sensor fusion with communication constraints are briefly discussed.

Efficient performance computations for trellis-coded modulation

The algorithm given by Rouanne and Costello (1989) for the computation of the distance spectrum is improved for trellis-coded modulation schemes having uncoded bits, i.e., for trellis diagrams having parallel paths. It is shown that, when through a trellis corresponding to such kind of codes, all parallel transitions (labeled by signal selectors) between states are considered as a single branch labeled by a subset, then defining subset selector distance polynomials makes the computational complexity of the distance spectrum dependent on the number of states as compared to the complexity of Rouanne and Costello algorithm which depends on the number of paths to be extended     

Thermal fatigue testing of CuCrZr alloy for high temperature tooling applications

CuCrZr alloy offers good mechanical and thermal properties and was investigated in the present work for its potential as tooling material in thixoforming of steels. Samples of CuCrZr alloy were cycled thermally between 450 and 750 °C, every 60 s. The thermal conductivity of the CuCrZr alloy, nearly an order of magnitude higher with respect to that of the conventional hot work tool steel, proved to be very beneficial in terms of thermal stresses generated at the surface upon thermal cycling. The maximum compressive and tensile stresses produced at the front face of the CuCrZr alloy were estimated to be approximately 30 and 10 MPa, respectively, much smaller than those endured by the conventional hot work tool steel. The very favourable thermal stress state in the CuCrZr alloy die was largely negated, however, due to its inferior resistance to high temperature oxidation.     

Effect of Welding Parameters on the Microstructure and Strength of Friction Stir Weld Joints in Twin Roll Cast EN AW Al-Mn1Cu Plates

Twin roll cast EN AW Al-Mn1Cu plates were butt welded with the friction stir welding process which employed a non-consumable tool, tilted by 1.5° and 3° with respect to the plate normal, rotated in a clockwise direction at 400 and 800 rpm, while traversing at a fixed rate of 80 mm/min along the weld line. Microstructural observations and microhardness tests were performed on sections perpendicular to the tool traverse direction. Tensile tests were carried out at room temperature on samples cut perpendicular to the weld line. The ultimate tensile strength of the welded EN AW Al-Mn1Cu plates improved with increasing tool rotation speed and decreasing tool tilt angle. This marked improvement in ultimate tensile strength is attributed to the increase in the heat input owing to an increased frictional heat generation. There appears to be a perfect correlation between the ultimate tensile strength and the size of the weld zone. The fracture surfaces of the base plate and the welded plates are distinctly different. The former is dominated by dimples typical of ductile fractures. A vast majority of the intermetallic particles inside the weld zones are too small to generate dimples during a tensile test. The fracture surface of the welded plates is thus characterized by occasional dimples that are elongated in the same direction suggesting a tensile tearing mechanism.     

A novel Al–Ti–B alloy for grain refining Al–Si foundry alloys

Al–Ti–B refiners with excess-Ti (Ti:B > 2.2) perform adequately for wrought aluminium alloys but they are not as efficient in the case of foundry alloys. Silicon, which is abundant in the latter, forms silicides with Ti and severely impairs the potency of TiB₂ and Al₃Ti particles. Hence, Al–Ti–B alloys with excess-B (Ti:B < 2.2) and binary Al–B alloys are favored to grain refine hypoeutectic Al–Si alloys. These grain refiners rely on the insoluble (Al,Ti)B₂ or AlB₂ particles for grain refinement, and thus do not enjoy the growth restriction provided by solute Ti. It would be very attractive to produce excess-B Al–Ti–B alloys which additionally contain Al₃Ti particles to maximize their grain refining efficiency for aluminium foundry alloys. A powder metallurgy process was employed to produce an experimental Al–3Ti–3B grain refiner which contains both the insoluble AlB₂ and the soluble Al₃Ti particles. Inoculation of a hypoeutectic Al–Si foundry alloy with this grain refiner has produced a fine equiaxed grain structure across the entire section of the test sample which was more or less retained for holding times up to 15 min.     

Spatiotemporal distribution of facilitation and inhibition of return arising from the reflexive orienting of covert attention.

Currently, there is debate regarding both the spatial and temporal relationship between facilitation and inhibition of return (IOR) components of attention, as observed on the covert orienting of visual attention task (COVAT). These issues were addressed in a series of experiments where the spatial and temporal relationships between cue and target were manipulated. Facilitation occurred only when the stimulus onset asynchrony (SOA) was short and there was temporal overlap between cue and target. IOR occurred only when SOA was long and there was no temporal overlap between cue and target. Facilitation encompassed the cued location and all locations between the cue and fixation, whereas IOR arose for the entire cued hemifield. These findings suggest that the facilitation and IOR found on COVATs that use noninformative peripheral cues are separable and stimulus-driven processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Stochastic Approach for Blind Estimation of Multiple Co-Channel Signals Received at an Antenna Array

A stochastic maximum likelihood approach for blind estimation of co-channel signals received at an antenna array is proposed in this letter. A hidden Markov model formulation of the problem is introduced and the Baum-Welch algorithm for the associated stochastic maximum likelihood estimation procedure is modified. The performance of the proposed algorithm based on the evaluation of approximate Cramer-Rao bounds is studied. Finally, some simulation results are presented.