Analytical Drain Current Modeling and Simulation of Triple Material Gate-All-Around Heterojunction TFETs Considering Depletion Regions

Semiconductors - This paper deals with electrostatic behavior of triple-material gate-all-around hetero-junction tunneling field-effect transistors (TMGAA-HJTFET) device. The model is advantageous...     

The yields of extracted leaf protein from lucerne (Medicago sativa L.)

The effects of fertilisers, frequency of cutting, row spacing and simazine on the yields of dry matter and extractable protein from lucerne (Medicago sativa L.) were studied using the laboratory-scale pulper and press. Between 40 and 65% protein nitrogen was extractable; extractability was not affected by the various treatments but altered with season. Lucerne responded with increased yields of dry matter and extractable protein to fertilisers, simazine (35 g/ha) and rows spaced at 30.5 cm. Six or 8 harvests were found to give greater yields than 5 harvests in 180 days. The annual yields of extractable protein reached 3100 kg/ha and it is felt that better control of pests could lead to even greater yields.     

Comprehensive studies on polyethylenimine filled polypropylene and its potential application in carbon dioxide sequestration

Polypropylene (PP) was blended with branched polyethylenimine (PEI) with the aim to prepare blends having CO₂ adsorption property. The CO₂ adsorption properties will be conferred due to the presence of variety of amine functionality in PEI. PEI contains primary, secondary as well as tertiary amine groups. Before testing CO₂ adsorption, PP–PEI blends were characterized using variety of techniques, for example, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, scanning electron microscopy, and polarized light optical microscopy. In this work, we have studied in detail both compatibilized as well as noncompatibilized blends of PP and PEI. The compatibilization was achieved via addition of maleic anhydride grafted PP. Finally, all the compatibilized as well as noncompatibilized blends were studied for CO₂ adsorption. The compatibilized blends showed better thermal, mechanical as well as CO₂ adsorption properties as compared to the noncompatibilized blends. POLYM. ENG. SCI., 59:2092–2102, 2019. © 2019 Society of Plastics Engineers     

Hemp seed oil: Minor components and oil quality

Owing to its high content of omega‐6/omega‐3 fatty acids and bioactive minor components with antioxidant activities, hemp seed oil is now recognized for its health benefits by a large number of consumers. This paper primarily discusses the profile of minor components in hemp seed oil and their beneficial and adverse effects on oil quality. While tocopherols, polyphenols and phytosterols prevent oxidative deterioration of hemp seed oil, the high amount of chlorophyll can be detrimental to oil quality.     

Structural and thermal characterization of CaO–MgO–SiO2–P2O5–CaF2 glasses

The influence of varying the CaO/MgO ratio on the structure and thermal properties of CaO–MgO–SiO₂–P₂O₅–CaF₂ glasses was studied in a series of eight glass compositions in the glass forming region of diopside (CaMgSi₂O₆)–fluorapatite [Ca₅(PO₄)₃F]–wollastonite (CaSiO₃) ternary system. The melt-quenched glasses were characterized for their structure by infrared spectroscopy (FTIR) and magic angle spinning (MAS)-nuclear magnetic resonance (NMR) spectroscopy. Silicon is predominantly present as Q² (Si) species, while phosphorus tends to coordinate in orthophosphate environment. The sintering and crystallization parameters of the glasses were obtained from differential thermal analysis (DTA) while crystalline phase fractions in the sintered glass–ceramics were analyzed by X-ray diffraction adjoined with Rietveld refinement. Diopside, fluorapatite, wollastonite and pseudowollastonite crystallized as the main crystalline phases in all the glass–ceramics with their content varying with respect to variation in CaO/MgO ratio in glasses. The implications of structure and sintering behaviour of glasses on their bioactivity were discussed.     

A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide

The influence of polymorphism on nanometric machinability of single crystal silicon carbide (SiC) has been investigated through molecular dynamics (MD) simulation. The simulation results are compared with silicon as a reference material.Cutting hardness was adopted as a quantifier of the machinability of the polytypes of single crystal SiC. 3C-SiC offered highest cutting resistance (～2.9 times that of silicon) followed by the 4H-SiC (～2.8 times that of silicon) whereas 6H-SiC (～2.1 times that of silicon) showed the least. Despite its high cutting resistance, 4H-SiC showed the minimum sub-surface crystal lattice deformed layer depth, in contrast to 6H-SiC. Further analysis of temperatures in the cutting zone and the percentage tool wear indicated that single point diamond turning (SPDT) of single crystal SiC could be limited to either 6H-SiC or 4H-SiC depending upon quality and cost considerations as these were found to be more responsive and amenable to SPDT compared to single crystal 3C-SiC.     

Complex impedance studies of low temperature synthesized fine grain PZT/CeO2 nanocomposites

Fine grain nanocomposites of (100 ? x) PbZr_0.52Ti_0.48O₃ ? (x) CeO₂ with x = 0.5, 1 and 2 wt%, were prepared and characterized for structural and microstructural changes. Addition of ceria nanoparticles resulted into a fine grain microstructure with average grain size ranging from 600 nm to 440 nm and a significant decrease in sintering temperature (～200 °C). Size distribution profile, as analyzed by lognormal distribution function suggests a very narrow size distribution. X-ray diffraction analyses of sintered samples reveal that fine grain PZT/CeO₂ nanocomposite could retain distorted tetragonal structure even with grain size as low as 440 nm. Further, complex impedance spectroscopy studies were performed to illustrate the electrical properties of bulk and grain boundary phases in fine grain ceramics. Two electrical processes in the impedance spectra at temperatures above 350 °C were attributed to bulk and grain boundary phase. Magnitude of grain boundary capacitance and corresponding transition was found to be strongly dependent on grain size of the system. Both bulk and grain boundary relaxation processes follows Arrhenius law.     

Solid-state production of esterase using fish processing wastes by Bacillus altitudinis AP-MSU

The bacterium Bacillus altitudinis AP-MSU, able to produce esterase was isolated from the gut of marine fish Sardinella longiceps. The esterase production was investigated in solid-state fermentation experiment using various fish processing waste meal. Among the tested fish processing wastes, red grouper waste emerged as the best source for higher esterase production. The suitable surfactant and triglyceride identified to increase the lipase production was neem oil. Effect of individual carbon and nitrogen sources supplementation on esterase production revealed that fructose and peptone aided the higher esterase production than the other tested carbon and nitrogen sources. The suitable concentration of sodium chloride for higher esterase production was at 5%. Effect of surfactants and trace elements on esterase production showed that Tween 20 and zinc sulphate, respectively produced maximum amount of esterase. The effect of physical parameters on lipase production revealed that 50 °C temperature and pH 7–8 were optimum for higher esterase production. Statistical optimization with Plackett–Burman design showed that neem oil, NaCl and fructose were found to be the most predictive factors for esterase production by this strain.     

Corrosion behavior of Monofrax K-3 refractory in borosilicate-based model low activity waste glass melts

Owing to its good chemical and thermal durabilities at high temperatures, Monofrax K-3 refractory is widely used in nuclear waste vitrification as a lining material in melting vessels. However, the corrosion of K-3 refractory during the vitrification of nuclear waste is a serious problem because it affects the melter's safety, performance, and lifetime. Therefore, in the present study, we have focused on unearthing the impact of glass network formers, such as SiO₂, B₂O₃, and Al₂O₃, in a model nuclear waste glass composition on the corrosion of Monofrax K-3 refractory. The corrosion tests have been performed per ASTM C621 at 1150°C for 5 days. The dimensional measurements on corroded K-3 refractory suggest that Al₂O₃ and SiO₂ tend to reduce the refractory corrosion (neck loss), with the effect of Al₂O₃ being significant. A corroded region on the K-3 refractory at the melt–refractory interface is observed. The corrosion occurs via a coupling of the melt infiltration induced by a capillary effect and the dissolution of Al, Mg, and Fe components from K-3 into the melt through chemical reactions. A Cr-rich layer is retained on the glass contact surface of the corroded K-3 refractory.