Isatin compounds as corrosion inhibitors for N80 steel in 15% HCl

The inhibition effect of two synthesized isatin compounds namely 1-morpholinomethyl-3-(1-N-dithiooxamide)iminoisatin [MMTOI] and 1-diphenylaminomethyl-3-(1-N-dithiooxamide)iminoisatin [PAMTOI] on the corrosion inhibition of N80 steel in 15% HCl solution was studied by polarization, EIS and weight loss measurements. It was found that both the inhibitors were effective and their inhibition efficiency was significantly increased with increasing concentration. Polarization curves revealed that the used inhibitors represent mixed-type inhibitors. Adsorption of these inhibitors led to a reduction in the double layer capacitance and an increase in the charge transfer resistance, and was found also to obey Langmuir isotherm.     

Antioxidant Capacity and Phenolic Content of the Aqueous Extract of Commonly Consumed Cucurbits

The antioxidant capacity of commonly consumed cucurbits vegetable was determined by the DPPH, FRAP, Fe³⁺ reducing power, and hydrogen peroxide scavenging assay. The aqueous extract of Luffa cylindrica showed the highest value of phenolic content and antioxidant capacity based on FRAP, Fe³⁺ reducing power, and hydrogen peroxide scavenging assay. However, Laginaria siceraria extract showed the highest flavonoid and DPPH scavenging activities among all three cucurbits used in this study. Phenolic content in aqueous extracts of Luffa cylindrica and Laginaria siceraria was almost equal. Cucurbita maxima exhibited the lowest phenolic, flavonoid content, and exhibited the lowest power of antioxidant scavenging. The antioxidant capacity of cucurbits was significantly correlated (P < 0.05) with the phenolic content of their extracts. The antioxidant capacity of Luffa cylindrica and Laginaria siceraria have also shown a significant correlation (P < 0.05).     

Dielectric and mechanical properties of PZN-PFN-BZN ternary system

The Ferroelectric relaxor ternary system 0.5PZN-(0.5 – x)PFN-xBZN was prepared using the columbite precursor method. The stability of the perovskite phase was studied as a function of BZN content in the system. It was observed that BZN is a good stabilizer of perovskite phase because of the high value of electronegativity difference between its cation and anion. It has also been observed that addition of BZN increases the dielectric maxima peak value and decrease the Curie temperature of the ceramics. The ternary composition 0.5PZN-0.425PFN-0.075BZN has been identified for MLCs applications. It has a T _c of around room temperature with a peak dielectric constant 6400 and tan 0.05. The mechanical properties of relaxor materials have also been studied and reported.     

Functionalized 1,3-teraryls as a new class of hepatoprotectants. Part V

A 29-year-old man was admitted to the hospital because of a high fever and dyspnea. He had a history of bronchial asthma and had had a bullectomy of the right lung at 15 years of age. He had visited a family physician because of fever and non productive coughing. Medications had no effect on his symptoms, and dyspnea developed. A chest X-ray film showed total collapse of the right lung, and he was referred to our hospital. Laboratory data showed eosinophilia and a high titer of IgE. Total obstruction of the right main stem bronchus by mucous plug was found during fiberoptic bronchoscopy. Aspergillus was detected by pathological examination of bronchial lavage fluid. Tests for aspergillus-specific IgE and IgG antibody were positive, as was immediate skin reactivity to Aspergillus. Allergic bronchopulmonary aspergillosis (ABPA) was diagnosed. Infusion and inhalation of a corticosteroid and fluconazole were effective; the symptoms resolved and X-ray findings improved. While migratory infiltration, proximal bronchiectasis and segmental or subsegmental atelectasis caused by a mucous plug are common X-ray findings in allergic bronchopulmonary aspergillosis, total collapse is rare.     

Reliability analysis of a two-unit cold standby redundant system with two operating modes

This paper considers a two unit cold standby redundant system subject to a single repair facility with exponential failure and general repair time distribution. Each unit can work in three different modes — normal, partial failure and total failure. There is a perfect switch to operate the standby unit on total failure of the operative unit. The system has been analysed to determine the reliability parameters e.g. mean time to system failure (MTSF), steady state availability, mean recurrence to a state and expected number of visits to a state, first two moments of time in transient state, by using the theory of Semi-Markov Process. Howard's reward structure has been super-imposed on the Semi-Markov Process to obtained expected profit of the system. A number of results obtained earlier are derived as particular cases.     

Models for Hardware-Software System Operational-Performance Evaluation

Stochastic models for hardware-software systems are developed and used to study their performance as a function of hardware-software failure and maintenance rates. Expressions are derived for the distribution of time to a specified number of software errors, system occupancy probabilities, system reliability, availability, and average availability. The behavior of these measures is investigated via numerical examples.     

A multi-standby multi-failure mode system with repair and replacement policy

This paper investigates the mathematical model of a system composed of (m + 1) non identical units—one functioning and m standby. Each unit of the system has three possible states—normal, degraded and failed. We consider two types of repair facilities—overhaul and minor repair. The system breaks down when the (m + 1)th unit after total failure is finally rejected and no standby remains to replace it. Several reliability characteristics of interest to system designers as well as operations managers have been computed. Results obtained earlier are verified as particular cases.     

Microwave Studies on Strontium Ferrite Based Absorbers

Single layer microwave absorbers based on strontium ferrite-epoxy composites have been fabricated and their reflection loss characteristics studied in the X-band (8–12.4 GHz) of microwave frequencies. Permittivity (_r – j_r) and permeability (_r – j_r) of Co and Ti added strontium ferrite SrCo _x Ti _x Fe_{12 – 2x} O₁₉ (x = 0.1 to 0.9 in steps of 0.2), have been measured. Thickness of the absorber is an important criterion influencing the absorption characteristics. Composites of 3 mm thickness are found to absorb over a reasonable range of X-band frequencies. A minimum reflection loss of –36.5 dB is observed for the composite with x = 0.3.     

Facile Preparation of Multifunctional WS2/WOx Nanodots for Chelator‐Free 89Zr‐Labeling and In Vivo PET Imaging

While position emission tomography (PET) is an important molecular imaging technique for both preclinical research and clinical disease diagnosis/prognosis, chelator‐free radiolabeling has emerged as a promising alternative approach to label biomolecules or nanoprobes in a facile way. Herein, starting from bottom‐up synthesized WS₂ nanoflakes, this study fabricates a unique type of WS₂/WO_x nanodots, which can function as inherent hard oxygen donor for stable radiolabeling with Zirconium‐89 isotope (⁸⁹Zr). Upon simply mixing, ⁸⁹Zr can be anchored on the surface of polyethylene glycol (PEG) modified WS₂/WO_x (WS₂/WO_x‐PEG) nanodots via a chelator‐free method with surprisingly high labeling yield and great stability. A higher degree of oxidation in the WS₂/WO_x‐PEG sample (WS₂/WO_x (0.4)) produces more electron pairs, which would be beneficial for chelator‐free labeling of ⁸⁹Zr with higher yields, suggesting the importance of surface chemistry and particle composition to the efficiency of chelator‐free radiolabeling. Such ⁸⁹Zr‐WS₂/WO_x (0.4)‐PEG nanodots are found to be an excellent PET contrast agent for in vivo imaging of tumors upon intravenous administration, or mapping of draining lymph nodes after local injection.     

Dynamic adaptive autonomy in multi-agent systems

Multi-agent systems require adaptability to perform effectively in complex and dynamic environments. This article shows that agents should be able to benefit from dynamically adapting their decision-making frameworks. A decision-making framework describes the set of multi-agent decision-making interactions exercised by members of an agent group in the course of pursuing a goal or set of goals. The decision-making interaction style an agent adopts with respect to other agents influences that agent's degree of autonomy. The article introduces the capability of Dynamic Adaptive Autonomy (DAA), which allows an agent to dynamically modify its autonomy along a defined spectrum (from command-driven to consensus to locally autonomous/master) for each goal it pursues. This article presents one motivation for DAA through experiments showing that the ‘best’ decision-making framework for a group of agents depends not only on the problem domain and pre-defined characteristics of the system, but also on run-time factors that can change during system operation. This result holds regardless of which performance metric is used to define ‘best’. Thus, it is possible for agents to benefit by dynamically adapting their decision-making frameworks to their situation during system operation.