The Influence of Heat Treatments on the Porosity of Suspension Plasma-Sprayed Yttria-Stabilized Zirconia Coatings

Suspension plasma-sprayed coatings are produced using fine-grained feedstock. This allows to control the porosity and to achieve low thermal conductivity which makes the coatings attractive as topcoats in thermal barrier coatings (TBCs). Used in gas turbine applications, TBCs are exposed to high temperature exhaust gases which lead to microstructure alterations. In order to obtain coatings with optimized thermomechanical properties, microstructure alterations like closing of pores and opening of cracks have to be taken into account. Hence, in this study, TBC topcoats consisting of 4 mol.% yttria-stabilized zirconia were heat-treated in air at 1150 °C and thereafter the coating porosity was investigated using image analysis (IA) and nuclear magnetic resonance (NMR) cryoporometry. Both IA and NMR cryoporometry showed that the porosity changed as a result of the heat treatment for all investigated coatings. In fact, both techniques showed that the fine porosity decreased as a result of the heat treatment, while IA also showed an increase in the coarse porosity. When studying the coatings using scanning electron microscopy, it was noticed that finer pores and cracks disappeared and larger pores grew slightly and achieved a more distinct shape as the material seemed to become more compact.     

Dielectric and thermal studies of the segmental dynamics of poly(methyl methacrylate)/silica nanocomposites prepared by the sol–gel method

Poly(methyl methacrylate)/silica (PMMA/SiO_x) nanocomposites were synthesized via sol–gel method and studied by various techniques. The dispersion of the silica particles (10–100 nm) in the matrix was probed by transmission electron microscopy (TEM), while solid‐state NMR and Raman spectroscopy detected the formation of an inorganic network with high degree of crosslinking. To elucidate the impact of the filler on the molecular dynamics of the PMMA, different methods were used; namely differential scanning calorimetry, thermally stimulated depolarization current and broadband dielectric relaxation spectroscopy. All three methods observed a significant impact of the nanoparticles on the segmental dynamics of the matrix, which was expressed as an increase of the glass transition temperature (T_g) in terms of calorimetry and as a shift of the α (segmental) relaxation to lower frequencies in terms of dielectric spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Analyses of the Mode of Action of an Alpha-Adrenoceptor Blocker in Substantia Gelatinosa Neurons in Rats

To elucidate why naftopidil increases the frequency of spontaneous synaptic currents in only some substantia gelatinosa (SG) neurons, post-hoc analyses were performed. Blind patch-clamp recording was performed using slice preparations of SG neurons from the spinal cords of adult rats. Spontaneous inhibitory and excitatory postsynaptic currents (sIPSCs and sEPSCs, respectively) were recorded. The ratios of the frequency and amplitude of the sIPSCs and sEPSCs following the introduction of naftopidil compared with baseline, and after the application of naftopidil, serotonin (5-HT), and prazosin, compared with noradrenaline (NA) were evaluated. First, the sIPSC analysis indicated that SG neurons reached their full response ratio for NA at 50 μM. Second, they responded to 5-HT (50 μM) with a response ratio similar to that for NA, but prazosin (10 μM) did not change the sEPSCs and sIPSCs. Third, the highest concentration of naftopidil (100 μM) led to two types of response in the SG neurons, which corresponded with the reactions to 5-HT and prazosin. These results indicate that not all neurons were necessarily activated by naftopidil, and that the micturition reflex may be regulated in a sophisticated manner by inhibitory mechanisms in these interneurons.     

Topological frustrations in Mn films on Fe(001)

The high lateral resolution of spin-polarized scanning tunneling microscopy allows new insights into the spin structure of antiferromagnets on the nanometer range. We demonstrate the capability to image a well-defined in-plane component of the sample spin polarization and discuss the spin structure of antiferromagnetic bct Mn in contact with the ferromagnetic Fe(001) substrate. Mn atoms couple ferromagnetically within a Mn atomic plane, while normal to the surface a layer-wise antiferromagnetic order was found. Magnetic frustrations arise in this system at Fe substrate steps at the interface, where topologically induced 180 degrees domain walls are created in the Mn film. A clear widening of the enforced domain walls with increasing Mn thickness was found. The measured widths could be fitted with a linear function and are explained on the basis of a Heisenberg model.     

User Advocacy in Participatory Design: Designers' Experiences with a New Communication Channel

We report on participatory design activities within the PoliTeam project, a large project which introduces groupware into the German government. Working with a representative small group of users in different worksites, an existing system was adapted to user and organizational needs, with the plan to improve and expand the system to a large scale. We integrated new approaches of user advocacy and osmosis with an evolutionary cycling process. User advocates and osmosis were techniques used to explore the users' needs during actual system use. These techniques were incorporated into the system development. In this paper, we present experiences with this approach and reflect on its impact on the design process from the designers' point of view.     

MWNT‐filled PC/ABS blends: Correlation of morphology with rheological and electrical response

A systematic study was done on morphological, electrical and rheological behavior of co‐continuous or dispersed‐type polycarbonate (PC)/acrylonitrile‐styrene‐butadiene (ABS) blends, containing different amounts of multiwalled carbon nanotubes (MWNT). The MWNTs gave substantial electrical conductivities to these nanocomposites at very low concentrations, owing to the effective melt processing method. Because of selective localization of MWNTs in the PC phase, along with double percolation phenomenon, the blend with co‐continuous morphology showed a lower electrical and rheological percolation threshold, higher melt viscosity and elasticity, as compared to the system with dispersed morphology. The morphology of both the blend systems was refined as a result of MWNTs incorporation but the morphology type remained unchanged. A typical role of compatibilizer in refining blend morphology was observed in both the systems. The electrical conductivity of the system filled with MWNTs in presence of compatibilizer, was lower than the systems filled with MWNTs only, which was attributed to role of compatibilizer in directing a part of MWNTs from PC matrix toward ABS phase. With increasing compatibilizer/MWNTs ratio, the influence of compatibilizer on morphology refinement and conductivity reduction was intensified. By comparing TEM micrograph of PC/SAN/MWNTs with that of PC/ABS/MWNTs, it was revealed that small portion of MWNTs was also located on polybutadiene rubber fraction of ABS. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 739‐748, 2013     

Quantification of pathogenic microorganisms and microbial indicators in three wastewater reclamation and managed aquifer recharge facilities in Europe

Managed Aquifer Recharge (MAR) is becoming an attractive option for water storage in water reuse processes as it provides an additional treatment barrier to improve recharged water quality and buffers seasonal variations of water supply and demand. To achieve a better understanding about the level of pathogenic microorganisms and their relation with microbial indicators in these systems, five waterborne pathogens and four microbial indicators were monitored over one year in three European MAR sites operated with reclaimed wastewater. Giardia and Cryptosporidium (oo)cysts were found in 63.2 and 36.7% of the samples respectively. Salmonella spp. and helminth eggs were more rarely detected (16.3% and 12.5% of the samples respectively) and Campylobacter cells were only found in 2% of samples. At the Belgian site advanced tertiary treatment technology prior to soil aquifer treatment (SAT) produced effluent of drinking water quality, with no presence of the analysed pathogens. At the Spanish and Italian sites amelioration of microbiological water quality was observed between the MAR injectant and the recovered water. In particular Giardia levels decreased from 0.24-6.14 cysts/L to 0-0.01 cysts/L and from 0.4-6.2 cysts/L to 0-0.07 cysts/L in the Spanish and Italian sites respectively. Salmonella gene copies and Giardia cysts were however found in the water for final use and/or the recovered groundwater water at the two sites. Significant positive Spearman correlations (p < 0.05, r_s range: 0.45-0.95) were obtained, in all the three sites, between Giardia cysts and the most resistant microbial markers, Clostridium spores and bacteriophages.     

Complexity of ultrafiltration membrane fouling caused by macromolecular dissolved organic compounds in secondary effluents

Recent investigations indicate the relevance of extracellular polymeric substances (EPS) in terms of fouling of low-pressure membranes in advanced wastewater treatment. In this study, the high impact of the macromolecular fraction of effluent organic matter on fouling was confirmed in cross-flow ultrafiltration experiments using secondary effluent with and without autochthonous biopolymers. A method for the extraction of a natural mixture of EPS derived from the bacterium Sinorhizobium sp. is presented. Ultrafiltration of solutions of this bacterial EPS extract revealed a correlation between the concentration of EPS and the loss of permeate flux. However, in ultrafiltration tests using extracted bacterial EPS in a model solution as well as in secondary effluent without autochthonous biopolymers, the extent of membrane fouling was not identical with the fouling provoked by secondary effluent organic matter, although the biopolymer concentrations were comparable. The differences in the fouling behaviour of the extracted bacterial EPS and effluent organic matter are considered to be due to different compositions of the biopolymer fraction in terms of proteins, polysaccharides, and other organic colloids, indicating a particular impact of proteins on ultrafiltration membrane fouling.     

Mortality analysis of an urban building stock

Research is presented on the estimation of the lifespan of cohorts of buildings and building stocks. This is based on the analysis of extensive longitudinal data of the 55?000 buildings in the City of Zurich from 1832 and 2010. The survival probability from different perspectives considers age, construction periods, and demolition periods for both existing and demolished buildings. Survival probability is established using a Kaplan–Meier estimator. A more in-depth approach to the mortality of buildings is then determined by differentiating building age, use, size and geographical situation (district). The use of a common geographical information system (GIS) allows longitudinal building data to be linked to a geographical hierarchy of three levels of analysis (city, district and building) accounting for the different granularity on each level (neighbourhoods, quarters, building parts). A comparison of the two methods indicates that the choice of the observed time periods can lead to very different results. The analysis of the three levels shows the possibilities and limits of combined statistical and historical approaches. Mortality analysis is a promising approach to inform policy and practice; it could become a new link between long-term scenario planning, construction policies and institutional regimes.