The ground water behaviour pattern and foundation stabilisation practice at hartebeestfontein

Hartebeestfontein Gold Mining Company Limited, which produces 100 kg of gold per working day, has a mining lease area situated mainly over dolomite. A major river nearby governs the regional drainage. The formation of sinkholes and dolines, caused by fluctuations in the water table and the flow of water underground, often accelerated as the result of unavoidable or inadvertent surface activities, is common in such terranes. To maintain production, meticlous ground investigations under new installations plus periodic re-examination and stabilisation under existing ones, particularly key installations, is necessary. The local ground water behaviour pattern is controlled by three impervious major dykes and two major fissure zones, the latter draining surface water into the mine workings. Monthly water table measurements over 25 years show a steady rise to a limit over the area of one fissure zone and a drastic lowering over the other. The value of gravity techniques and thermal infra-red line scanning for cavity detection in the Hartebeestfontein context, is discussed. The procedures followed, for stabilising ground and foundations, are illustrated by means of case histories. The extension of the techniques, learnt from the stabilisation experience, to limiting water seepage into shafts sunk through dolomite, is also discussed.     

Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Comfort limits for asymmetric thermal radiation

Groups of 32 and 16 subjects of both sexes were exposed in an environmental chamber to radiant asymmetry caused by a cool wall, a warm wall, and a cool ceiling. Each subject was tested individually while seated and clothed at 0.6 clo. During each 3.5-hour experiment the subject was exposed to six radiant temperature asymmetries. He was asked whether and where he experienced any local cool or warm sensation, and whether it was felt to be uncomfortable. During the entire experiment he was kept thermally neutral by changing the air temperature according to his wishes.For cool walls, warm walls, and cool ceilings curves have been established showing the percentage of dissatisfied subjects as a function of the radiant asymmetry. Radiant asymmetry at a warm wall caused less discomfort than a cool wall. A cool ceiling caused less discomfort than a warm ceiling. Accepting that 5% of the subjects may feel uncomfortable. a radiant temperature asymmetry of 10°C is allowable at a cool wall, 23°C at a warm wall, and 14°C under a cool ceiling. A previous study showed that 4°C is allowable under a warm ceiling. Radiant asymmetry had no significant impact on the operative temperatures preferred by the subjects. No significant differences were observed between the responses of men and women exposed to radiant asymmetry.     

Quantitative demonstration and cost considerations of a software fault removal methodology

This paper presents a demonstration of a methodology for fault removal during software development. The methodology encompasses the entire development history, from system and software requirements generation to system test. Thus it considers not only the faults during software testing after formal configuration controls have been invoked, but also the faults discovered prior to that phase: during system and software requirements generation, preliminary design, detailed design and code and unit testing. The agents for fault discovery used in verification and validation are called activities, techniques and tools (AT & Ts) in this paper, each having a certain maximum potential or capability for fault discovery. The AT & Ts considered include the usual specification review activities, and also certain tools not normally applied in ‘standard’ software development, such as automated requirements aids. Application of the methodology yields numbers of residual faults as of each phase of development, including those remaining to be discovered during operations and maintenance. Some previous experience and data on residual faults correspond to these results, indicating that the methodology and choice of parameters are reasonable. The methodology also allows one to calculate a relative loss due to delay in fault discovery, which, as is well known, rises rapidly when faults are not discovered during the phase in which they are generated.     

Quantitative determination of aflatoxin B1 in chick liver

A method for the rapid and quantitative determination of aflatoxin B1 from small quantities of liver, around 1-2 g, is described. The extraction procedure involves acidification to pH 2 of the aqueous liver homogenates, extraction with chloroform: acetone and HPLC-fluorimetric detection after derivatization with trifluoroacetic acid. Quantitative recovery of aflatoxin B1 from chick liver was achieved and detection at levels of 0.2-1 ppb was proved feasible. The aflatoxin B1 concentration in chick liver after oral administration is also shown.     

Overcoming the challenges in deploying user provisioning/identity access management backbone

This paper sets out to share BT's leadership and experience by determining the identity management opportunities and issues, then document the lessons learnt in previous deployments and recommend strategies for all types and sizes of organisation. Today's ICT environment has created a mixed approach to access management across sectors. Browser-based any time, anywhere, anyone access, coupled with the business need to access more systems and services across a changing infrastructure of distributed platforms and networked services, has changed the administrative landscape. Enterprises are being forced to add administrative support staff or invest in technology-driven process change. At the same time, users are undergoing significant change, creating new expectations in service quality. Moreover, regulatory bodies are demanding confirmation that processes granting access are controlled and documented. In this world of increasing demands, complexity and expectation, the service management tools, techniques and options available to improve user access management are as varied and numerous as the issues faced by management in their deployment. Identity management is widely heralded as an opportunity to improve the end user experience, reduce costs, improve security and deliver regulatory compliance — but is often misunderstood. Projects regularly fail to achieve the expected benefits. These failures are the result of expectations being inappropriately set, deployment of solutions turning out to be more complex or taking longer than expected, and/or products selected before required functionality has been determined. For the larger more mature organisations, or those organisations that are the amalgamation of mergers and acquisitions, the dilemma is where to start and what approach to take.     

Evaluating the application of a decision support system in identifying adequate wastewater treatment for small communities. A case study: the Fluvia River Basin.

The identification of adequate wastewater treatment for small communities is a complex problem since it demands a combination of data from different sources, such as aspects of the community and landscape, the receiving environment and the available wastewater treatment technologies. The Catalan Water Agency (Agència Catalana de l'Aigua) considered using an EDSS (Environmental Decision Support System) as a tool to help water managers select the most adequate treatment for the urban wastewater of nearly 3,500 small communities in Catalonia (Spain). From that moment, EDSS was applied to all the river basins in Catalonia. In this paper the authors present the results obtained for the 76 small communities located in one of these river basins: the Fluvia River Basin. The characteristics of the community used in the reasoning process of the EDSS, the list of selected wastewater treatment alternatives, the technical environmental justification for the selected treatments and the reasons for discarding, favouring or disadvantaging them are presented. Finally, some results for the Fluvia River Basin are compared with those obtained in other Catalan river basins with different characteristics in order to evaluate which are the significant features in identifying adequate wastewater treatments.     

Hydrologic regionalisation impacts on wet-weather control selection.

Continuous simulation is performed using the US Environmental Protection Agency (USEPA) Storm Water Management Model (SWMM) to evaluate regional differences around the United States in hydrologic and water quality performance of wet-weather controls. Controls are characterised as being limited by peak inflow rate (i.e. any device with little or no storage, such as screens, filters and some proprietary devices) or by storage capacity (e.g., ponds, tanks). For flow-limited devices, results are presented in the form of percentage of annual runoff volume captured (passing through the device) for a given inflow capacity. For storage-limited devices, results are presented in two forms: percentage of annual runoff volume captured as a function of unit basin size and drawdown (drain) time, and as a percentage of total suspended solids captured, for the same two variables. Regional differences are apparent, driven mainly by variations in rainfall patterns around the country.