Transmission loss allocation through equivalent bilateral exchanges and economical analysis

A new loss allocation (LA) scheme based on the principle of equivalent bilateral exchanges (EBEs) is presented and compared with other available techniques. Formulation and results from extensive simulations including consistency tests show that the suggested methodology has several desirable properties: It is flow-based, requiring only a solved load flow for its implementation; it is not dependent on the choice of a slack bus; it is straightforward to apply; undesirable negative loss allocation is not produced; and low volatilities are shaped. An economic analysis with various LA methods is also carried out when these are integrated into a combined economic dispatch/load flow dispatch strategy, a likely scenario for LA in a real system. This combined dispatch strategy yields prices charged to the loads and rates received by the generators that account for loss allocation and loss supply. Results show that these economic indexes are very close to the marginal costs derived from an optimal power flow (OPF) approach with the advantage of reducing volatility.     

The prediction of solute transport in surcharged manholes using CFD.

Solute transport processes occur within a wide range of water engineering structures, and urban drainage engineers increasingly rely on modelling tools to represent the transport of dissolved materials. The models take as input representative travel time and dispersion characteristics for key system components, and these generally have to be identified via field or laboratory measurements. Computational Fluid Dynamics (CFD) has the potential to reveal the underlying hydraulic processes that control solute transport, and to provide a generic means of identifying relevant parameter values. This paper reports on a study that has been undertaken to evaluate the feasibility of utilising a CFD-based approach to modelling solute transport. Discrete phase modelling has been adopted, as this is computationally efficient and robust when compared with the time-dependent solution of the advection-dispersion equation. Simulation results are compared with published laboratory data characterising the dispersion effects of surcharged manholes, focusing specifically on an 800 mm diameter laboratory manhole for a flowrate of 0.002 m(3)/s and a range of surcharge depths. Preliminary indications are that the CFD results adequately replicate the measured downstream temporal concentration profiles, and that a threshold surcharge depth, corresponding to a change in hydraulic regime within the manhole, can also be identified.     

Measurement of the relative reduction of strip on the 1200-model temper-rolling mills in flat-rolled products shop No. 3

The temper-rolling mills in flat-rolled products shop No. 3 at the MMK has been equipped with the Vytyazhka automated system to measure the elongation of strip (ASEMS) rolled on the mill. The elongation (relative elongation) of the strip is determined through a frequency-based method of measuring the speed of the strip before and after reduction. The system transmits and displays information on the temper-rolling of each coil. The information is shown as a diagram on the monitor of an industrial computer. The reliability of the system allows it to be in continuous use. Introduction of the automated elongation measurement system makes it possible to monitor the reductions being made during temperrolling, which in turn enables the shop to reduce the number of products having properties that do not meet customers’ requirements. __________ Translated from Metallurg, No. 1, pp. 62–63, January, 2007.     

Scrap metal: The problem of its shortage and efficient use

The most important element of manufacturing processes that employ new metallurgical technologies is improving the quality of the scrap metal used in the given process. Introducing modern scrap-processing equipment is especially important in this regard. At the same time, it is also necessary to use the latest technological advances in order to reduce the oxidation loss of iron during refining in arc steelmaking furnaces.     

New technological solutions to protect the lining of blast-furnace hearths

The use of schungite as a partial replacement for coke is practiced in Russia at a number of metallurgical plants, both in the production of foundry iron (its primary use) and in making conversion pig iron. The largest amount of coke is replaced when foundry iron is being made, the replacement coefficient in this case having a value within the range 0.8–1.3. Studies that included continuous monitoring of the temperature of the carbon blocks in blast furnaces with volumes of 1719, 3200, and 5580 m³ unambiguously demonstrate that the thickness of the slag crust in blast furnaces increases with the use of schungite. Protecting the lining of the hearth through the use of schungite is also accompanied by a decrease in coke consumption. __________ Translated from Metallurg, No. 8, pp. 53–57, August, 2007.     

Corrosion resistance of a bent plate from a high-nitrogen nonmagnetic 05Kh22AG15N8M2F steel in aggressive media

The corrosion resistance of the convex and concave sides of bent plates from a high-nitrogen non-magnetic steel has been studied in aqueous solutions of sulfuric and hydrochloric acids. Weighing and hydrogen methods are used to control the corrosion rate of bent-sample sides and to find a number of effects that complement the picture of the stress corrosion of iron alloys and support the existence of the mechanochemical deformation sign effect.     

Organ distribution of bovine serum albumin administered intragastrically in the rat

Radioimmunoassay was employed to examine distribution of antigenic structures of bovine serum albumin (BSA), absorbed by the gastrointestinal tract, in the blood serum and organs of intact rats. It was shown that 3 h after administering 3H-BSA an appreciable amount of its antigenic structures could be identified in the blood serum, liver, spleen, and carcass of the animals. The total amount of antigenic determinants of BSA which got into the internal environment of the body from the intestine amounted to about 0.2% of the dose administered. The highest specific content of antigenic structures of BSA supplied via the intestinal barrier was detected in the spleen.