Oxygen consumption and activity of the white sucker (Catostomus commersoni), in lethal and nonlethal levels of the organochlorine insecticide, methoxychlor

The survival, oxygen consumption and spontaneous activity of suckers were determined at 15°C in water containing different concentrations of methoxychlor in ethanol, ethanol, and no added substances. A dynamic bioassay was used to estimate the 96 h LC50, which was found to be 0·0345 ppm. Routine oxygen consumption was determined in a continuous-flow respirometer, and the activity was recorded in separate experiments by measuring the water disturbance using silver wire electrodes.After 24 h fish exposed to untreated, ethanol-treated and 0.01 ppm methoxychlor-treated water had oxygen uptake rates which were relatively constant and near standard levels. At 0.10 ppm methoxychlor (lethal to all fish within 85 h), oxygen consumption rates were 2–3.5 × as high as those of control fish. Activity also greatly increased. The fish lost their balance along with the coordination between opercular and locomotor movements. Suckers that died in 0.04 ppm methoxychlor showed oxygen uptake rates and poisoning symptoms similar to 0.10 ppm treated fish, while those that survived this treatment had rates similar to control fish. The increase in ventilation which accompanies this hyperactivity may result in increased uptake of insecticide and thereby explain the irreversible nature of the response.     

Rapid enumeration of water bacteria

The research reported in this paper is devoted towards the development of a rapid bacteriological test for water. The proposed technique consists in measuring “Cold T.C.A. insoluble portion” of metabolized phosphorus in multiplying bacterial cells with recourse to radioactive phosphorus-32 as a tracer and enumerates bacteria in 1 h incubation time. A linear correlation (coefficient of correlation = +0·989) has been shown to exist between this portion of phosphorus and cell population for bacterial species of public-health significance, thereby providing a point d'appui for this approach of enumerating water bacteria.The data reported in the paper reveal a promise for the differential enumeration of Grams positive and negative cells by incorporating suitable chemical inhibitors in appropriate concentrations in the test portions for rapid test.The technique has been exhibited to be applicable to field samples drawn from surface and underground sources of water. Its reproducibility and economics are comparable with “Standard Method” procedures.     

Oxygen transfer in a rotating disc treatment plant

In this paper experiments are described in a bio-disc pilot plant. A new method has been developed for a reproducible measurement of the thickness of the waterfilm on the rotating discs. The results were used to calculate the oxygen transfer coefficient into water (K_L). The values of K_L, calculated in this way, appeared to be considerably higher than experimental K_L-values, which is mainly due to the fact that the water layer on the rotating disc is outdistanced by the disc. This effect has not been taken into account in the literature so far.     

Sorption of benzenesulfonates by weak base anion exchange resins

Weak base phenol formaldehyde anion exchange resins were found to have an excellent capacity for removing the anionic organic species benzenesulfonate (BS), p-toluenesulfonate (PTS) and dodecylbenzenesulfonate (DBS) from pH 2 and 4 solutions. The capacity for DBS was generally greater than that of activated carbon and significantly greater than that of a polystyrene-divinylbenzene resin with no ion exchange functional groups. The maximum capacity of the weak base resins appeared to be limited by the exchange capacity of the resin. The mechanism of removal was strongly indicated as being either ion exchange at the amine functional groups in the acid form, or uptake of a proton by the amine groups in the free base form with the organic anion as the associated counter ion. Increasing concentrations of Cl⁻ decreased the amount of organic anion that could be sorbed.The swelling of one of the resins, Duolite A-7, also had a marked effect on its sorption capacity. The pores of the acid chloride or acid organic anion form of the resin were apparently larger than those of the free base form; thus, as conversion of the resin to the acid form took place, a greater amount of uptake was observed. The effect of swelling on the capacity of Duolite S-37 was much less, apparently owing to its larger pore structure, but its capacity for DBS at low pH was lower than that for A-7 because of its lower nitrogen content. Also, BS and DBS were easily removed from the weak base resins by washing them with NaOH. Four bed volumes of 1 m NaOH gave essentially complete regeneration of BS saturated A-7.     

Dynamic analysis and optimal feedback control synthesis applied to biological waste treatment

The dynamics and optimal feedback control of biological waste treatment processes are examined. Modern feedback control theory is applied and results are obtained for both proportional and proportional plus integral control. A dynamic mathematical model of the system is developed by employing a Monod kinetic model, which is modified to account for endogenous metabolism, and a complete mixing flow model in the growth chamber. The feedback control is implemented via the flow rate so as to maintain desired effluent concentrations. External disturbances which cause changes in substrate concentration and/or cell concentration are considered and optimal control effort is applied. Results are also presented for impulse and step changes in the influent substrate concentration. It is found that by changing the values of the weighting factors in the objective function, it is possible to obtain good control of either the effluent substrate concentration or cell concentration.     

The development of macrolayer thickness of water in the pool boiling regime

ABSTRACT

The main purpose of this study is to analyse the phenomenon of pool boiling in water over a horizontally placed copper tube heater of 28?mm diameter. The experiment has been carried out to observe the bubble growth and departure characteristics for the heat flux range up to 40,000?W/m². The entire process is being recorded by a digital camera at different time intervals. The measured parameters have been used to determine the initial layer thickness, macro layer thickness and critical heat flux and validated with models proposed in the literature.     

Damage costs produced by electric power plants: An externality valuation in the Mexico City Metropolitan Area

This paper presents an estimate of the externalities produced in the Mexico City Metropolitan Area (MCMA) through the impacts on health caused by secondary pollutants attributed to seven electric power plants located outside this area. An original method was developed to make possible a simplified application of the impact pathway approach to estimate the damage costs in the specified area. Our estimate shows that the annual costs attributed to secondary pollutants total 71 million USD (min/max 20/258 million USD). Finally, this paper discusses basic ideas on the implications for energy policy arising from this exercise in externality valuation.     

Features of Water Origin on the Planet Earth. New Aproaches to the Assessment of Water Quality

issues of origin of water on the planet Earth and hypotheses of hydrosphere genesis have been dealt with. The article underscores interrelationship between the quality of drinking water and the level of evolution of human intellect. Substantiated is the principled insufficiency of assessing the drinking water using only chemical and microbiological methods of control. The research showed the necessity of introducing new standards for drinking water taking into consideration its safety at the cytogenetic level. The article has analyzed problems of obtaining high quality drinking water and methods of its decontamination. For the first time we demonstrated that chlorinated tap water is the medium habitat of hazardous for humans of nonculturable, but viable pathogenic forms of microflora.     

The impact of using chilled water storage systems on the performance of air cooled chillers in Kuwait

In the air conditioning (AC) industry chilled water storage (CWS) systems are one form of cool thermal storage technology that can be used to time shift the electrical load of the system from the peak day periods to off peak night time periods. In this paper the data for the actual exported and generated electrical energy obtained for the power stations in Kuwait has been used to estimate the electrical energy consumption and the peak electrical load of AC systems. Since the chiller in an air cooled AC system represent more than 75% of the total electrical power consumed by an AC system during the peak demand period, the impact of using CWS systems with alternative operating strategies including partial (load levelling), partial (demand limiting) and full load has been investigated. In our conclusions we estimate that approximately 45% of the total annual exported electrical energy is consumed solely by AC systems as a result of the very high ambient temperatures occurring between March and October. Furthermore, it is estimated AC systems represent about 62% of the peak electrical load. The results demonstrate that CWS can reduce the peak electrical load of a chiller in an air cooled AC system by up to 100% and reduce the nominal chiller size by up to 33% depending upon the operating strategy adopted. This is achieved with only a 4% increase in power consumption of the chiller for all CWS strategies except for full storage where the energy consumption actually decreases by approximately 4%.     

A digital wind gust recorder

The instrument was a byproduct of an undergraduate final year project on wind power which was carried out by the Department of Mechanical Engineering of the University of Liverpool.The windmill test site was on an exposed, rocky island where there was no history of weather recording but a long tradition of violent winds.Field experience during the winter months suggested that corrosion fatigue arising from wind buffeting and salt spray would rank equally with maximum wind pressure as criteria of failure and if modern materials, so convenient for forming aerodynamic surfaces, were to be used then limited life concepts would need to be considered. This called for more knowledge of wind variations at the test site. A complete wind spectrum taken on chart recording instruments would have been ideal but since such such refined devices were not available the instrument to be described was designed.The only wind measuring instrument which was available was a rotating cup anemometer. This supplied an alternating voltage proportional to its rotational speed. It also operated a gear driven microswitch which could give an integrated “miles of wind” reading on an electromagnetic counter.Briefly the e.m.f. generated by the anemometer (Fig. 1) was matched against a pre-set voltage corresponding to the required gust velocity. When this was exceeded an appropriate counter was operated. Only the rising e.m.f. was significant. The subsequent fall was ignored. Initially three stages were incorporated which reported the gusts rising through forty, fifty and sixty knots, respectively. These recorded on separate counters. All basic settings were based on pitot-static speed determinations in a wind tunnel.