Fate of ivermectin residues in ewes' milk and derived products

The fate of ivermectin (IVM) residues was studied throughout the processing of daily bulk milk from 30 ewes (taken up to 33 d following subcutaneous administration of 0.2 mg IVM/kg b.w.) in the following milk products: yoghurt made from raw and pasteurized milk; cheese after pressing; 30- and 60-day ripened cheese; and whey, secondary whey and whey proteins obtained after cheese-making (albumin cheese). The concentration of the H2B1a component of IVM was analysed in these dairy products using an HPLC method with fluorescence detection. The mean recovery of the method was, depending on the matrix, between 87 and 100%. Limits of detection in the order of only 0.1 microg H2B1a/kg of product were achieved. Maximum concentrations of IVM were detected mostly at 2 d after drug administration to the ewes. The highest concentration of IVM was found on day 2 in 60-day ripened cheese (96 microg H2B1a/kg cheese). Secondary whey was the matrix with the lowest concentration of IVM (<0.6 microg H2B1a/ kg). Residue levels fell below the limits of detection between day 5 (for secondary whey) and day 25 (for all cheese samples). In the matrices investigated, linear correlations between daily concentrations of IVM, milk fat and solid content were evident. During yoghurt production, fermentation and thermal stability of IVM was observed. During cheese production, approximately 35% of the IVM, present in the raw (bulk) milk samples, was lost. From the results it was concluded that the processing of ewes' milk did not eliminate the drug residues under investigation. The consequences of IVM in the human diet were discussed. Milk from treated animals should be excluded from production of fat products like cheese for longer after treatment with IVM than for lower fat products.     

Scale and translation invariant minimum average correlation energy filter

A new type, to our knowledge, of scale and translation invariant correlation filter is described. Its form in polar coordinates generalizes the forms of the one-decomposition-term filters. That is combined with the minimum-average-correlation-energy optimization method to suppress the sidelobes and achieve correlation peaks. A theoretical analysis as well as a detailed explanation of the computational procedure is provided. The concept is tested on five interferometric images of 256 gray levels without preprocessing. The computed filter gives correlation peaks for reference image scales in the range of 0.3/4.0 (minimal scale: maximal scale = 1:13). The discrimination ability of the filter is investigated-no false peak occurred. The filter works in the background so that there is no need for input image segmentation. A method for extension is described to calculate a filter for more than one reference image.     

Validation of LAI and assessment of winter wheat status using spectral data and vegetation indices from SPOT VEGETATION and simulated PROBA-V images

Due to the information gap between the VEGETATION sensors and Sentinel-3 mission, the Belgian state decided to build a small satellite, Project for Onboard Autonomy-Vegetation (PROBA-V), to ensure the continuity of the data record for vegetation studies. In this study, simulated PROBA-V data generated by the Landsat Thematic Mapper (TM) were used to evaluate the potential of this mission to assess winter wheat status. The root mean square error (RMSE) of PROBA-V's leaf area index (LAI), which was generated using the exponential method and the interpolation method, is 0.33 and 0.96 for March 2011 and 1.40 and 3.33 for May 2011, respectively. Système Pour l'Observation de la Terre (SPOT) VEGETATION's LAI does not show a significant relationship with the reference LAI values except for the LAI values during the stem elongation 100% phenological stage generated using the exponential method (correlation coefficient, r = 0.91; p = 0.01). For the tillering and stem elongation 100% phenological stages, linear regression models for the fraction of absorbed photosynthetically active radiation (FAPAR) with PROBA-V's normalized difference vegetation index (NDVI) were developed (coefficient of determination, R ², of 0.94 and 0.88). Exponential models for LAI (R ² of 0.91 and 0.93) and fresh weight of above-ground biomass (AGBf) (R ² of 0.90 and 0.93) with PROBA-V's near-infrared (NIR) and visible and near-infrared bands (VNIR B2) were developed accordingly. The assessment of winter wheat status showed that the highest and the lowest values of PROBA-V's simulated data (SD), i.e. NDVI, normalized difference water index (NDWI), and LAI of Field 2 and Field 4, correspond to the ground-measured biometric parameters.     

Expected interference in wireless networks with geometric path loss: a closed-form approximation

In this letter, we derive 2λπP/((α - 2)g^{(α - 2)} as a closed-form approximation of the expected interference around a receiver in wireless networks. We use a geometric path loss model, assume that nodes are randomly distributed, and that only nodes outside a guard zone around the receiver simultaneously transmit. The derived solution depends on the path loss exponent α, node density λ, transmission power per node P, and the radius g of the guard zone. The simplicity of this solution makes it widely applicable in wireless network analysis.     

PtRu nanoparticles supported on nitrogen-doped multiwalled carbon nanotubes as catalyst for methanol electrooxidation

Nitrogen-doped carbon nanotubes (N-CNT) obtained by plasma treatment were compared to the conventional acid-treated carbon nanotubes (O-CNT) as catalyst support for platinum-ruthenium (PtRu) nanoparticles in the anodic oxidation of methanol in direct methanol fuel cells. PtRu catalysts were prepared by an impregnation-reduction method from chloride precursors with metal loadings of 20 wt.%, and were characterised by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and electrochemical methods. Voltammetry and chronoamperometry studies showed that the performance of PtRu/N-CNT was significantly higher compared to PtRu/O-CNT and also to the commercial E-TEK PtRu/C catalyst, indicating that N-CNT are an interesting support material for fuel cell electrocatalyst. Nitrogen plasma treatment produced pyridinic and pyrrollic species on the CNT surface, which acts as the anchoring sites for the deposition of PtRu particles. A mechanism for the deposition of PtRu on N-CNT is tentatively proposed and discussed.     

Tight complexity bounds for the two-dimensional real knapsack problem

We study the complexity of the 2-dimensional knapsack problem , where . The problem is defined in terms of real numbers and we study it where an integral solution is sought under a real number model of computation. We obtain a tight complexity bound , where . Received: November 1998 / Accepted: December 1998     

An Analysis of the Sensitivity of Digital Modulation Techniques to Frequency-Selective Fading

This Paper investigates the sensitivity to frequency-selective fading of different modulation techniques commonly used in digital radio systems. The modulation methods considered are phase-shift-keying (Mary PSK), nonoffset and offset quadrature amplitude modulation (M-ary QAM), and quadrature partial response signaling (QPRS). The performances of these methods during multipath fading are compared on the basis of the "signatures" calculated for idealized systems. Results are presented from which the relative outage probability was determined, assuming a propagation channel with frequency-selective Rician fading.     

Single-wall carbon nanotubes prepared with different kinds of Ni-Co catalysts: Raman and optical spectrum analysis

The addition of acetates and nitrates for the synthesis of single-wall carbon nanotubes via laser ablation was explored. Targets containing nominal amounts of acetates or nitrates in addition to Ni and Co catalysts were compared to a standard target containing only Ni and Co at temperatures ranging from 1000 to 1200 °C. The as produced web-like soot was characterized by transmission electron microscopy, Raman spectroscopy and optical absorption spectroscopy. All samples showed a linear increase in SWCNT mean diameter with temperature; however, the rate of mean diameter change with temperature differed for the various targets, more so at lower temperatures. The addition of nitrates improved the SWCNT relative yield over all the temperatures used, whereas the inclusion of acetates improved the relative yield only at lower temperatures. The above results were discussed and analyzed according to the porous structure of the targets resulting from the decomposition of the acetates and nitrates and consequential thermal diffusion changes.     

Fracture mechanics models applied to delayed failure of LVL beams

Several theories for modelling fracture and slow growth of a crack in wood have been developed. The various models may be differentiated by the specifically regarded stress levels, failure mechanisms and averaging procedures. This paper deals with the application of viscoelastic fracture mechanics models to predict delayed failure of a timber element in bending. Simulations are compared to experimental results of bending tests carried out on LVL (Laminated Veneer Lumber) notched beams. This analysis emphasizes the influence of the geometry and of the size of the beam as well as of the damage area on the delayed failure.